About this item:
4.9 out of 5
98.46% of customers are satisfied
5.0 out of 5 stars Brilliant!
I had a smudge on my sensor and I stupidly tried to remove it with a microfiber cloth and blowing on it. Not only did I make the smudge worse but i also transferred (no exaggeration) about 100 specs of dust, no matter what I did I couldn't remove them. I used the lightroom - visualize spots on a plain white image and it looked like it was snowing.Ordered this kit which arrived next day and works even better than I imagined. It actually removed every single spec of dust off the sensor, it also removed the smudges and it looks brand new!Excellent piece of kit and worth every penny.If you have dusts or hairs, this combined with a blower is all you will ever need.5 Stars absolutely fantastic!
5.0 out of 5 stars It does what it's supposed to!
It works fine as described. Good for cleaning the camera sensor.
4.0 out of 5 stars Cleans the sensors
Good amount for the money.
5.0 out of 5 stars Worked perfectly
I've not had a good experience with sensor cleaning in the past. I always seemed to make things worse. So I was miffed when my new XT+5 got contaminated.Got these based on reviews and price and they worked perfectly first time. If you have a sensor with IBIs then make sure you check out some guides. All in all reasonably value for money
5.0 out of 5 stars Makes a daunting task straightforward
I discovered that I had had dust on the sensor of my Sony a6000 camera and after a bit of research decided to try these. To establish the problem I took photos of my white kitchen wall at f/22 and there were several spots. The swabs arrived quickly and well packaged. 14 swabs and plenty of liquid. I used the first swab as a test on my mobile just to get the feel of it, then took the plunge. I was daunted but comfortable that I had worked out what to do and sometimes you just have to go for it.It was easy to drop a couple of drops of liquid on the swab then draw it across the sensor and then using the other side of the swab draw it back. I then took another photo of my white wall and most of the dust was gone. I then repeated a number of times, sometimes with liquid and sometimes dry and took a photo every time. Obviously you can only use each each swab once so you do go through a few. I ended up with a stubborn spot and it took a few goes but eventually I took a photo proving my sensor was as clean as I could get it and I couldn't see any spots at all.Given that my sensor was quite dirty it and it was my first ever try, it may not be that surprising that I used 12 of the 14 swabs but hardly any of the liquid. However, for at least half the price of a professional job and no hassle traveling or waiting, my sensor is perfectly clean.I am impressed how straightforward it was even for a first timer and now realise it is not a job to worry about in the future. One to be careful with and to take time over but not difficult. Pleased I tried and have ordered more swabs without the liquid for future cleaning.Recommended.
5.0 out of 5 stars Not as scary as you might think
Probably, like me, you are looking at this product, and thinking “should I? is the risk worth it?”I have an five year old, very used, approx 170K photos taken, fujifilm mirrorless camera with interchangeable lenses, that had so much dust and dots on the sensor, they occasionally looked like dark stars in a blue sky. I’d spend several minutes just trying to heal them in lightroom, and as soon as i did anything with the sky, or bright colours, more dots and dust would show up. Trying to fix this, and the time taken, is frustrating to say the leastI’ve only used this product once, but all those dots and dust appear to have now gone, and the camera has gone out on a cold day and took another 200+ pictures, with no obvious ill effect. The skies are clear, and upon review in lightroom, there appear to be no obvious issues that need to be healedWould I use this product on a relatively new camera? Possibly no. I don’t know enough about camera cleaning for me to know if i’m doing long term good or harm here. But to refresh an old camera, bring the sensor back to clarity and clearness, rather than spending thousands on a new camera, then I am definitely happy with this product so far.Note - do some research into how to do home sensor cleaning properly before you try this. I have seen guides that recommend turning off inbody image stabilisation, so as to protect that mechanism when cleaning the sensor. There may be other recommendations out there too
5.0 out of 5 stars Worked fine when Visible Dust failed 3 times
Same your money and get these. I tried cleaning my sensor with Visible Dust wipes and liquid. I think I got rid of the dust first time then got something else in the camera that wouldn't budge. And I was about to go on a trip. And WEX sensor cleaning service was booked up. And so I took a punt and got these. Problem solved. Sigh of relief as I will be shooting macro with small apertures... The art of using these is to try to swipe accurately over the sensor surface with just enough liquid to dampen the swabs as per instructions, then close the camera opening with a lens or cover promptly to avoid recontamination (and make sure your covers are clean). I also use a face mask (got a spare one or two) and gloves (got a few spare pair) to avoid breathing into the cavity and skin detritus getting in there. Wish I had one of those fancy loupes to help.
5.0 out of 5 stars Absolutely fantastic, cleans grime and dust
I bought a a6400 off ebay and although it was brand new, it had a smudge and some dust on the sensor, as though someone had touched it with a finger. I was terrified it wouldnt come off, as it was quite prominent and looked greasy. However, these cleaned it PERFECTLY. Nothing was left on the sensor - no micro scratches, no dust, no grease. The pricing could be a bit better but it's worth it to clean your sensor at least once.I'd recommend watching some videos online on how to correctly clean a sensor with a cleaning kit like this - they're short and demonstrate how to do it correctly. On a side note, the box says to use one or two drops per brush - I found that to clean off the greasy mark I had to use 3-4 drops. But there's still plenty of liquid left - even though I spilled quite a bit (don't know how, probably just accidentally squeezed too hard). It dries very fast, within a matter of seconds. Each brush comes individually sealed to make sure there's no dirt on it. Great product.
Works great!
Read the directions ahead of time. Easy to use. Do NOT use it dry. Used it to clean myDSLR Sensor. Used a hand held blower 1st. Then the damp wand. No more dust on my images now! Good price.
Excelente para limpiar
Son muy buenos y al precio es muy económico, tienes con 1 paquete pata limpiar tu lente por al menos 2 años, súper recomendado.
Altijd propere sensor
Geweldige set om eenvoudig zelf de sensor van mijn (2) Nikon D500 boddy's te reinigen. Topproduct en duurzaam door zelf regelmatig uit te voeren. Altijd propere sensor nu !!
Senza timore.
La pulizia del sensore è un'operazione delicata, ma facile da eseguire. Ho trovato questo kit davvero ottimo, seguendo le istruzioni si fa tutto in meno di 10 secondi. Io l'ho appena usato per pulire il sensore della mia Fujifilm X-S10 e non ho riscontrato difficoltà. Ho spento il ventilatore per evitare pulviscolo nell'ambiente, ho tolto l'obiettivo e dato diversi colpi di soffietto sul sensore. Poi ho poggiato la macchina fotografica sulla scrivania, ho preso uno swab, l'ho imbevuto con due gocce di soluzione e ho proceduto con la pulizia: da sinistra a destra una volta, sempre da sinistra a destra una seconda volta (stavolta ruotando di 180 gradi lo swab). Fatto, pulitissimo! Io notavo diverse macchie rivedendo al PC una fotografia su sfondo bianco. Dopo questa veloce procedura sono sparite. In teoria il sensore potrebbe anche tenersi sporco, è difficile e forse raro scattare a f22. A diaframmi fino a f8 non si vede nulla. Dovevo comunque procedere con la pulizia perché avevo un altro problema, una specie di graffio che vedevo sul sensore che riproduceva sulle fotografie una sorta di pixel bruciato di colore bianco. Fortunatamente non era un graffio, probabilmente era un pelino microscopico che non veniva via con il soffietto. Con due passate di questo prodotto è sparito. Per me e per la mia esperienza, consigliato!P.S.: qualcuno, anzi tanti, dicono di non aver timore di pulire il sensore perché ha una resistenza simile ai vetri degli obiettivi. Sarà vero? Io penso di sì.
Parfait pour capteur aps c
Très bien, aucune rayure, les poussières et taches ont bien été nettoyé.Par contre ça reste un peu cher à mon goût.
Visit the UES Store
BHD12588
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United Kingdom
Or share with link
https://bolo.com/