Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
Model: 549686
Product Name: Hand Guard
Handle Bars, Levers & Mirror Part Type: Mirrors Bolt Hand Guard
Placement on Vehicle:Left, Right, Front
Color: Smoke + Black Hardware / Clear + Black Hardware
Material: High Quality ABS Plastic + Metal Stem
Qty: 1 Set =2 Pieces (Left & Right)
Fitmnet:
Fit for most motorcycle with the direct 10mm mirror Thread (Fairing Mirror excluded)
HARLEY
FLSTSC FLSTS FLSTF FLHRC FLHR FLSTFB XR1200 XR1200X VRSCA VRSCDF VRSCDX VRSCB VRSCAW FLST FLSTN FXSTS FXST FXDB FXS FXDF FXCW FLSTSB FXDXT FXDX FXSTB FXDWG FXDL FXDCI FXDC XL1200 XL1200R XL1200S XL1200L XL1200N XL1200X XL1200C XL883 XL883R XL883S XL883L XL883N XL883C XR1200 XR1200X
Hon-da
CB1300 CB1300ST CB1300 CB1000 VT1300 VTX CB900 CB1100 X11 X4 XR400 VRX400 VT400S CB400FOUR CB400SF CB400SS CL400 V-TWIN MAGNA PS250 VTR250 XR230 GB250 CB2223S FTR223 SL230 XL230 CB125T XLR125R PCX125 XR100 CRF70F XR70 XR50
YAMAHA
XVS1300CA V-MAX FZ-1 XV1100 SR500 T-MAX FZX750 TDM850 SR400 SRX400 SRV400 XJR400R XV250 TT250R WR250R WR250X XT250X TW200 TW225 R-1Z DT230
SUZUKI
GSF1200S SV1000 GSX400 SV400 GSX400S KATANA 0 DR-Z400SM GSX250FX ST250 ? DF200E TS200R GS125E GZ125 DF125E GN125R YBR125 YBR250
KAWASAKI
ZRX400-2 ER-4N KLE400 W400 KLX250 250TR KSR-1 KSR-2 KSR110 KDX125SR
Note:
1.We provide clear pictures, measurements where possible. Please check as much as possible to make sure the item is the one that you need.
2. Please allow 0.5-1 inch difference due to manual measurement.(1inch=2.54cm)
3.There are no instructions included in this kit.Professional Installation Is Highly Recommended.
4.Please Compare The Hand Guard With Your Original One Before Purchasing.
Package Included:
2 X Hand Guard (Left& Right)
Review:
4.3 out of 5
86.15% of customers are satisfied
5.0 out of 5 stars Actually great!
I was looking for a pair of wind breakers for winter and there is a mountain of plastic rubbish to sift through...and often a lottery as to whether you'll have space on your bars for the fixtures. Other hand-guards require you to strip your grips off (for a safer fit and collision protection) - but if you're just looking to keep the wind off these are brilliant.Easy-ish to fit to your mirror posts (once you've gotten 2 spanners and figured out the reverse threading dilemmas). Some "precision bending" helped me line these up due to slight differences in the setup on each side...but basically bolt it all together and bend to match left and right. The metal is flexible enough to do this but go a little at a time.I was worried they might look a bit OTT but actuall they look spot on! Really keep the wind at bay! Sorry the only photo is from behind...The weather is awful so can't get out to take another shot!
4.0 out of 5 stars A bit basic.
Fitted to a 350 Enfield. Had to make my own brackets as the ones included, although sturdy and well made, didn't suit. They only just cover my fingers, but that's all I need.
5.0 out of 5 stars Works Well - As described. Value for money. Yamaha XSR700
I was not sure when I brought these that they would fit and look good. No fitting instructions included but simple enough to fit. Check out the pictures to give you an idea. Make sure you use the washers on each side of the bolts to prevent the plastic and metal from cracking. Taken the bike out at all speeds and these having moved and work well. For the money I would recommend. I'm riding a Yamaha XSR700 2018
1.0 out of 5 stars It’s a poor design and is potentially dangerous in my view.
There are no instructions. It’s relatively easy to work out how to fit them. There is a stamped powder coated bracket that is bolted to the hand guard. This bracket is then fixed to the mirror mount of the bike. In my case the brackets were too short so the guards did not clear the levers. There are some extension brackets supplied for this scenario that extend the first bracket. The chances of these staying in position under these circumstances is very unlikely and there isn’t even a locking washer provided. The consequences of the guard folding into the brake lever could be fatal. There is no way I would fit these to my bike.
3.0 out of 5 stars Parts too short
Nice enough but I'm unable to use until I but additional parts too for them. The short two holed extension is half the distance I need. Now I need to spend the same amount again to use the things.What's the expression, buy cheap, buy twice!I should have just paid twice the price for something else.
5.0 out of 5 stars Very good value for money
This is a very cheap product, i bought it thinking it will break fast. Not the case, ive installed it using the mirrors on a 2001 divvy 600. They could do with a few more parts, as its an universal item, bu they are quite sturdy and help protect the hands from tye wind quite good. Careful, they may hit the fairing when full locked.
5.0 out of 5 stars Great product
No instructions but easy enough to fit on my 2019 Harley 48 special, looks good and they keep the wind off my finger tips so does the job. Attached to the mirror shaft, the o-rings, I assume, go either side of the bolts that hold the bracket to the screen, the outside one looks like it may pop off the bolt head although only tightened to minimal torque, we will see, may add a washer .. After some test runs I added M6 Stainless steel washers, see close-up of screw heads pic. Secures the O-Rings better.
4.0 out of 5 stars Can be used on Harley-Davidson FLSB Sport Glide WITH CAUTION !
Because of the ferocious price of hand guards made specifically for the Sport Glide, I decided to take a chance on these. In my view they are well made and packaged, good value for the price. Shipped from China and took about 10 days to arrive to U.K.. There are no instructions so note the points below. Sport Glide owners will be aware that the turn signal brackets are mounted on the mirror stem and this reduces the amount of thread available to add the hand guard bracket. I have non-stock mirrors so I cannot speak for those of you with stock or other mirrors, but I had only 10mm of thread available. This was only just enough for the hand guard and turn signal brackets and a couple of turns of thread for the nut. (Hand guard bracket first, then turn signal). No room for the locking washer. Before tightening the nut on the mirror stem, I found that by slackening the Allen screw (socket screw) that clamps the ball-joint on which the turn signal unit hangs, I could rotate the turn signal bracket and manoeuvre the turn signal units so that the hand guard does not obscure them at all - see photos. So no need to cut the plastic. I added Loctite medium thread locker to the nuts on the mirror stems before tightening JUST enough to secure everything. Do not overtighten. If you have not got minimum 10mm of mirror stem thread available do not buy this product - unless you have a cunning plan.IMPORTANT - the fittings include 8 ‘O’ rings, 4 per hand guard. TWO SHOULD BE FITTED BETWEEN THE MOUNTING BRACKET AND THE PLASTIC ON THE INSIDE FACE, AND TWO BETWEEN THE CORRESPONDING PLATE AND THE PLASTIC ON THE OUTSIDE FACE. THE BOLT HEADS SHOULD BE IN THE OUTSIDE. PUT SOME THREADLOCK ON THE BOLT AND DO NOT OVERTIGHTEN THE NUTS, JUST TIGHT ENOUGH TO BE SECURE OR YOU MAY DAMAGE THE PLASTIC.Hope this helps...
BELLISSIMI !
Per la Kawasaki W800 sono bellissimi. Materiali ottimi, molto robusti, verniciati e rifiniti molto bene. Le due staffe aggiuntive mi hanno permesso un montaggio ottimale. La protezione dall'aria, probabilmente, non é elevata come certi paramani molto grandi e avvolgenti, il cui acquisto ho considerato, ma ho rinunciato per la notevole complessità di montaggio e per l'estetica inaccettabile su una modern classic. Infine il prezzo é molto vantaggioso, circa 6 volte inferiore a quello richiesto dal concessionario per paramani originali Kawasaki, concessionario bravo e onesto che non mi ha nascosto le difficoltà di montaggio. Alla fine di questo non semplice processo sono soddisfattissimo della mia scelta.
Fits my Honda Valkyrie 1500 perfect
Einfache montage. Passt unter die Spiegel Mutter Die rubberringen soll men an beide Seiten das plexiglas montieren. Die Mutter mit Lock-tide rot fest setzen.
Premières impressions positives
Sitôt reçues, sitôt posées. Ces coques sont sympa est abordables par rapport à un tas d'autres protège mains. Fixées avec sous les freins et non aux rétroviseurs, elles sont mieux intégrées. J'ai du toutefois déplacer les clignotants sur les coques car ils ne passaient pas dans leur position d'origine.Il y a des joints toriques fournis. Bien les mettre entre les pattes métalliques et le plexi afin d'éviter qu'il ne casse. Et ne pas serrer comme un bourrin. J'ai mis un peu de frein filet afin d'éviter que les vibrations ne desserre tout.Plus qu'à tester l'efficacité sur route, maintenant que la fraîcheur est au rendez-vous
bonito y buena calidad. encaja perfectamente en una yamaha midnight star 950
precio inmejorable, facil colocacion, encaja perfectamente y queda esteticamente bonito.para una custom negra queda mejor el color negro (no es negro del todo, es como 'ahumado intenso'.y protege las manos del frio un montón. Muy recomendable para manos frias. No se mueve con el viento.no lleva instrucciones pero el montaje es basico, incluso para moteros 'torpes' con las tuercas. en la yamaha midnight en el espejo derecho no le hace falta el accesorio alargador, en el espejo izquierdo sí le hace falta, debido a las distintas posiciones de anclaje de ambos espejos.
Confort et protection sur la route
Ces protège-mains se sont révélés être un ajout précieux à ma moto, une Shadow 125. Non seulement ils s'adaptent parfaitement au guidon, mais ils offrent également une protection exceptionnelle contre le vent. Conduire ma moto est maintenant beaucoup plus confortable, surtout par temps froid ou venteux. De plus, leur installation était simple et rapide. Je suis extrêmement satisfait de ce produit et je le recommande à tous les motards cherchant à améliorer leur confort et leur sécurité sur la route.
Visit the Alamor Store
Alamor Motorcycle Hand Guards Handlebar Handguards Protecter compatible with Har-le-y Xl 883 1200 Dyn-a Roa-d King-Black
BHD13026
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
'%3e%3crect%20x='0.599609'%20width='22.4'%20height='16'%20fill='%230A17A7'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M-0.426196%20-1.53223L9.1335%204.91587V-1.06506H14.4668V4.91648L24.0263%20-1.53147L25.2193%200.237148L17.6615%205.33494H23.0002V10.6683H17.6618L25.2187%2015.7655L24.0258%2017.5341L14.4668%2011.0865V17.0683H9.1335V11.0871L-0.425634%2017.5348L-1.61858%2015.7662L5.93947%2010.6683H0.600172V5.33494H5.93977L-1.61914%200.236387L-0.426196%20-1.53223Z'%20fill='white'/%3e%3cpath%20d='M15.5332%205.06615L25.6655%20-1.59961'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M16.6094%2010.9578L25.6924%2017.0801'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M7.00176%205.04727L-2.47266%20-1.33789'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M8.02936%2010.8842L-2.47266%2017.8486'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M0.599609%209.6H10.1996V16H13.3996V9.6H22.9996V6.4H13.3996V0H10.1996V6.4H0.599609V9.6Z'%20fill='%23E6273E'/%3e%3c/g%3e%3c/svg%3e)
Product origin: United Kingdom
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
Similar suggestions by Bolo
More from this brand
Similar items from “Frames & Fittings”
Share with
X
Or share with link
https://bolo.com/