Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
Review:
4.8 out of 5
95.38% of customers are satisfied
5.0 out of 5 stars Amazing resin! I'm a first time user and it worked perfectly - so easy and virtually no bubbles
This is my very first time using any form of resin. I used it to create 3D layered doodle art. It's crystal clear like glass, zero smell, virtually no bubbles, very easy to use. Says on the box that it takes 24 hrs to cure, but I was able to draw on mine with a paint pen 12hrs after pouring each layer. I used a plastic an A4 paper container box as a mould and it demoulded like a dream. I had no issues with it at all and will definitely buy from Craft Resin again next time b'n.Here's the thing though: I did a ton of research before getting into resin in general. There are many potential pitfalls when using resin and I've seen reviews of various resins where people complained it didn't cure properly. This could well be down to not reading up on how to mix the components properly (min 3 minutes stirring time, ensuring you scrape the sides of the container and the mixing stick 3 times at least during mixing etc), or adding the wrong kinds of things to the resin (specific resins need specific kinds of pigment colours etc as different chemicals can interrupt the reaction between the components etc). I can attest that this resin works very well so long as you read up about how to use resin in general and follow the very clear instructions provided in a pdf from Craft Resin when you buy. There are a couple of very good resin info websites out there I used when doing my research - one's called resin obsession, the other is called art resin. Good luck!
5.0 out of 5 stars Perfect resin for many batches
It's very easy to mix and is more then enough to make so many resin parts, it is abit difficult to pour that's only ever a small part of the process.
4.0 out of 5 stars Resin
First time using this product, was easy to ise and the results were very good.Very messy, and very hard to clean off a surface you didnt want to get resin on
5.0 out of 5 stars Good quality well packaged resin
I got this resin kit. Thank you very much. So far, so good. Good instructions, good quality, clear. Bubbles are flowing up and disappearing during curing. Time will tell if it changes the colour, but so far, I'm impressed.
5.0 out of 5 stars Gave my Ikea desk a new life!
This was my first time ever using Epoxy Resin and I couldn't be more happy with the results!I've had the Ikea HEMNES desk for about 2 years and used various products to try protect the wood such as mouse pads and pvc sheets. However their durability wasn't the best and always ended-up having to buy another protection after a couple of months.If any of you are familiar with this type of desk, it can become easily dirty, chipped or stained. There isn't any glossy layer on it, it's just wood with paint so not meant to stay in pristine condition when used daily.Recently I was thinking about a more durable solution while still keeping the desk neat and tidy. I thought about a glass-top but the sound of putting plates of coffee cups on it would have driven me insane with time.I watched some Youtube videos with some people using epoxy resin but it looked really complicated and seemed to require some diy knowledge, which I don't.I was still determined to find a solution and came across this product which seemed more beginner-friendly. I spent some time going through the reviews, checking the instructions for best results and decided to give it a go.* This is how it went:- I put a protective sheet all around the desk (you absolutely need one if doing this at home!!) and mixed the resin and harder together 50/50 as instructed.- I mixed them together slowly for about 5 minutes and poured it straight on the desk. I then used a foam brush which I ordered based on what people were advising in the reviews to spread it on the desk.- And then that's it, all you need to do is wait.- I checked every couple of hours and it settles very quickly. This stuff is stronger than super glue so make sure you use gloves when checking if it's hard.- The dripping eventually stops after a couple of hours. It started settling after 6-12 hours and was fully settled/rock hard after 24 hours.As you can see from the pictures the results are pretty good - I was really happy and impressed by it.I did get a couple of tiny bubbles on the surface but you need to look close to see them and I'm really not bothered by it. I didn't even try to get rid of them with an air dryer or lighter because they're so small it's really not a big deal to me.My desk is 120 cm x 40 cm so 1 bottle of 1L did the job and gave me a layer of about 2-3mm. If you're working on a bigger surface you'll definitely need more.Overall I'm super happy with this product, it's exceeded my expectations and wasn't that hard to do. It does take a bit of preparation, I had to order the sheets and brushes especially for this job but it worked out the same price as getting a glass-top except that this looks and feels better!
5.0 out of 5 stars Superb Result Easy to use
This was super easy to use and the end result is fantastic.Highly recommend, i used to make a Bar top using Bottle tops.
5.0 out of 5 stars Great quality
A really good quality resin, very easy to work with and mixes well. Dries to a crystal clear colour. Has a good working time. Performance wise I have shallow poured, and slightly deep poured and no matter what the thickness it's been a consistently great finish. East to clean up and very versatile. Came with well labelled bottles, some gloves and a really nice quality stiring stick. This is really low odour as well.
5.0 out of 5 stars epoxy resin
I am seeing reviews about this stuff not setting and that the stuff has gone off bad batchbasically most of these resins are made in the same place (China) it does not matter who you bought it off one is not better than others just the pricethe reason it is not setting is because you are not mixing it correct .If your purchase is cloudy then yes it has gone off send it back before opening itignore the manufacture mixing time double what they say 3 minutes =6 minutes mix it hard until it goes cloudy with air after you have poured it fine spray Isopropanol over your project that will get rid of the air bubbles also ignore the cure time resin does not cure in 24hrs 48hrs is enough to start handling
Out Standing
Excellent Product. This is the first time that I have used this resin product. I used the resin for a 2.5" deep mold, 5" height, 4" Wide. I followed the directions exactly; voila, perfect results! My project required me to layer the resin within the proper time frame. Mixing the resin exactly as directed in the instructions is crucial, warm bath for the resin, and 3 minutes gently siring properly. You can't be in a hurry. I monitored the resin for bubbles to possibly develop on each layer for about the first 15 minutes for each. There were very few bubbles which were popped accordingly. I walked away too soon in monitoring the last layer and there were a few bubbles when I returned. Bad thing to do. The resin already started to cure. I waited a little longer, drilled into the resin to reach the bubbles to pop and cleaned drill dust thoroughly from the mold. I poured another thin layer of resin to fill bubble holes and coat the face side completely. There are a few tiny bubbles, but they are not any big deal and not that noticeable. I believe the bookends turned out beautiful. The Craft Resin Store has great customer service! They promptly sent me replies to my questions that I needed answered quickly to save me from my bubble problem (my fault). This project turned out beautiful. It's crystal clear. This resin is so easy to work with even if you are a beginner. I'll be ordering again. Thank you Craft Resin Store!
Too much money !!
Thought it was a small amount for the price. Grate product tho .
Not impressed with the product
The resin is quite thick and not flowing, I had to use my hands to spread it as it was not flowing. Strong smell, states No smell on the product. Less working time than normal resin, just about 20- 25 min than 35-45 min in normal resin products. Not happy with the product.Positive- No bubbles formed, so that was good. Quick Delivery but not packed properly as box was already broken
Great product
1:1 ratio and so very easy to use without the big chemical smell you get from other resins.
Good quality, low bubbles, easy to use
I used this to make a chessboard and found it very easy to use and crystal-clear. Be warned, this has a low viscosity compared to other epoxies, but, wow, does it cure smooth and glossy.
Visit the Craft Resin Store
CRAFT RESIN 1L Epoxy Resin Kit - Crystal Clear Resin Kit & Hardener for DIY Art, Moulds Casting Resin, Wood, Jewellery Making, Coasters, Table Top, Countertop Coating - Food Safe, Heat & UV Resistant
BHD19069
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
'%3e%3crect%20x='0.599609'%20width='22.4'%20height='16'%20fill='%230A17A7'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M-0.426196%20-1.53223L9.1335%204.91587V-1.06506H14.4668V4.91648L24.0263%20-1.53147L25.2193%200.237148L17.6615%205.33494H23.0002V10.6683H17.6618L25.2187%2015.7655L24.0258%2017.5341L14.4668%2011.0865V17.0683H9.1335V11.0871L-0.425634%2017.5348L-1.61858%2015.7662L5.93947%2010.6683H0.600172V5.33494H5.93977L-1.61914%200.236387L-0.426196%20-1.53223Z'%20fill='white'/%3e%3cpath%20d='M15.5332%205.06615L25.6655%20-1.59961'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M16.6094%2010.9578L25.6924%2017.0801'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M7.00176%205.04727L-2.47266%20-1.33789'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M8.02936%2010.8842L-2.47266%2017.8486'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M0.599609%209.6H10.1996V16H13.3996V9.6H22.9996V6.4H13.3996V0H10.1996V6.4H0.599609V9.6Z'%20fill='%23E6273E'/%3e%3c/g%3e%3c/svg%3e)
Product origin: United Kingdom
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
More from this brand
Similar items from “Metal Filled Epoxies”
Share with
X
Or share with link
https://bolo.com/