Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
This oil-free piston compressor (Airbrush Compressor) is a great choice for users who are looking for a high quality spray effect. It has a 3 liter air tank whose pressure is automatically maintained by the compressor. Enjoy excellent control and enjoy crisp, steady, pulse-free paint with easily adjustable output pressure. It is perfect for your spray painting, also for nails and temporary tattoos, cake decoration, craft painting, etc.
LOWER FAN INSTALLED
Oil free piston compressor with 3 litre tank.
It can start with continuous and powerful, powerful pressure.
Constant pressure with pulse-free output and zero pulse.
The pressure gauge can display the working pressure and maximum pressure.
Auto start and stop function.
Heat protected and low noise function.
The compressor has an easy carry handle.
Rubber feet are ideal for protecting your work surface.
Specifications: Plug Type: UK
Voltage: 220-240V / 50Hz; 110-120V/60Hz.
Speed: 50Hz: 1450 Speed/minute; 60Hz: 1700 Speed/minute - Type: Single cylinder piston compressor - Power: 1/6 HP - Airflow: 20-23L/min - Air tank: 3L - Automatic shutdown: 4 bar (58PSI).
Auto start: 3 bar (43PSI)
Low noise: ≤ 50 dB.
Connections: 1 /8 BSP
Material: aluminium + copper + steel.
Power cable length: approx. 1.9 m/6.2 ft
Item size: 320 x 140 x 310 mm/12.6 x 5.5 x 12.2 inches.
Item weight: 4.823 kg/10.6 lb. Package size: 33 x 15 x 32.5 cm/13 x 5.9 x 12.8 inches.
Package weight: 5.2 kg
Package list:
1 x air compressor.
1 x user manual
Review:
4.9 out of 5
98.33% of customers are satisfied
5.0 out of 5 stars Perfect for scale model painting.
A few reviews here complain of this air compressor overheating if run continuously for 20 minutes which is entirely correct, it will overheat if run continuously because it was not designed to do so.I bought this to replace a compressor I had owned about 10 years that was virtually identical this unit but without the reserve tank, and as long as you held the airbrush spray button down the motor would run, it was not over noisy but the idea of a reserve tank holding 3 litres seemed a good idea.It is, if like myself you spray a small area at a time on 1/35 tanks etc you can mostly use the your air-brush from the stored air with the motor kicking in briefly and occasionally to keep the reserve tank topped up which is nice, much less noise.If you do larger models such as 1/16 tanks which I also do you will exhaust the reserve 3 litres quite quickly and the motor will be running more often.Even on large 1/16 kits I have never had this compressor shut down due to overheating but these things do get hot to the touch which can seem alarming but is quite normal.It has plenty of safety features such as a thermal cut-out and comes with. a moisture trap which is essential to avoid disappointment when finishing a model and a great splat of water shoots from the gun and ruins it.Upon first starting I was indeed impressed at how quiet it was but I am sure that the 2nd time I started it, it was a bit noisier, a slight metallic rattle that had not been there there initially.In hindsight I wish I had checked it with a decibel meter then I would be sure, it is not distracting and was not worth returning it but I am fairly sure that something changed.I mainly use a Harder & Steenbeck air-brush at about 15 psi and this runs perfectly, no surging or loss of pressure, it keeps a continuous smooth air flow going for even paint application.I have probably used it for about 100 hours in total by now and everything is still fine, any increased noise has not got worse and of course I could be wrong anyway, maybe my ears cleared a bit the 2nd time running.I paid £79.99 in 03/23 which was a very good price, it will never be as good as an Iwata or other similar top end models but it is a quarter of the price yet I would still recommend it for its intended purpose which is small scale air-brushing, nail art etc.Excellent little compressor and always remember to drain the tank after use to prevent internal rust forming in the tank.
5.0 out of 5 stars Great compressor
I figured out that most of the noise comes from the keyring type pull tab on the pressure release. I've taped mine up and on the rare occasion it comes on to recharge the pressure it is seriously quiet. Absolutely perfect for airbrushing the minis you might get around to painting in 18 months.
5.0 out of 5 stars Quiet and reliable
I used this compressor for an airbrush to change the colour of my corner suite. The paint used was special water based leather paint as well as using it for the top spirit based top coat/sealant.It worked well and was easy to set at the pressure that I wanted it to run at.The only downside was I had to source an adapter to connect my airbrush to it as the airbrush hose was a smaller size than the outlet connector but this was probably an issue with my airbrush and not the compressor.It ran quietly and automatically stop and started to maintain the set pressure. I was pleased with the results.
4.0 out of 5 stars A solid little airbrush compressor
It compresses air and delivers it, not much more to say really about the basic functions.It is quiet for a compressor - our dishwasher makes more noise.The only problem is the lack of instructions for the regulator. To operate it you pull up the black knob then turn anti-clockwise to increase the pressure fed to the airbrush. If you open the regulator valve with nothing connected the regulator gauge will not show pressure and the tank will take ages to fill, if it ever does. That is how all compressors work and is perfectly normal.The piston housing does get quite warm, but the tank means that it isn’t running all the time at working pressures at the brush below around 30psi so the thermal trip doesn’t kick in. I’ve used it for hours at a time, with the motor only running briefly once in a while (airbrushing at around 20psi).The water trap is effective enough and no moisture appears to get past it, and the tank doesn’t collect much water at current UK temperatures and humidity either.Overall good value for the money if used for the intended purpose.
5.0 out of 5 stars Great compressor
It’s really good for a fantastic price. I checked a lot of reviews where people had been using it for over a year with no issues. It does get a warm if you use it a lot, but that’s the heat sink that gets warm which pulls the heat away from the unit, so it’s not an issue or a reason not to buy this. I love it. It
5.0 out of 5 stars Great compressor
Arrived very quickly, works well and was considerably smaller than I had imagined. I am new to airbrushing so this was perfect for learning. Tank size is probably a bit small for constant work as it only takes a few seconds of painting before the compressor kicks in again. This is not a problem as it is pretty quiet but it will start to get hot quickly with constant use. Very please with it for my purposes and very easy to operate.
5.0 out of 5 stars Great
I have only used it twice, but it does the job.Runs for a while, tops the tank up, stops and only starts again when needed.Not very loud, as far as compressors go.Appears to provide a constant air flow.Adjustable pressure with locking motion is nice.Includes a moisture trap and manual pressure release on the tank.A little rough around the edges but hey, it was cheap for a compressor with a tank.
Compresseur haut de gamme
Compresseur haut de gamme, silencieux et très utile avec les deux cuves. Très belle puissance, c’est ce que l’on voulait. Bravo😊
Silenzioso. Buone prestazioni.
Consente di verniciare piccoli oggetti, mantiene bene la pressione e non si sente affatto in funzione. È silenzioso.
Fait tout son effet
Très bonne qualité.Satisfait complètement mes attentesNe prend pas trop de place et fait vraiment son effetJe recommande vraiment
Bra kompressor för nybörjare och semipro
Håller du inte på med att måla hela dagarna, utan du målar några modeller då och då, så är det en perfekt kompressor enligt min mening. Motorn kan bli lite varm efter mycket användande, men det var inget som störde mig.
Schön leise
Der Kompressor arbeitet leise und zuverlässig. Der Druck wird gehalten, bzw. sofort nach Erreichen der 3 Bar nachgepumpt. Für Airbrush m. E. sehr gut geeignet.
Visit the TIMBERTECH Store
Timbertech Professional Piston Airbrush Compressor with Cooling Down Fan ABPST08 Airbrush Mini Compressor Oil-Less Quiet Spraying Air Compressor with Tank 220-240V
BHD77003
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
'%3e%3crect%20x='0.599609'%20width='22.4'%20height='16'%20fill='%230A17A7'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M-0.426196%20-1.53223L9.1335%204.91587V-1.06506H14.4668V4.91648L24.0263%20-1.53147L25.2193%200.237148L17.6615%205.33494H23.0002V10.6683H17.6618L25.2187%2015.7655L24.0258%2017.5341L14.4668%2011.0865V17.0683H9.1335V11.0871L-0.425634%2017.5348L-1.61858%2015.7662L5.93947%2010.6683H0.600172V5.33494H5.93977L-1.61914%200.236387L-0.426196%20-1.53223Z'%20fill='white'/%3e%3cpath%20d='M15.5332%205.06615L25.6655%20-1.59961'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M16.6094%2010.9578L25.6924%2017.0801'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M7.00176%205.04727L-2.47266%20-1.33789'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20d='M8.02936%2010.8842L-2.47266%2017.8486'%20stroke='%23DB1F35'%20stroke-width='0.533333'%20stroke-linecap='round'/%3e%3cpath%20fill-rule='evenodd'%20clip-rule='evenodd'%20d='M0.599609%209.6H10.1996V16H13.3996V9.6H22.9996V6.4H13.3996V0H10.1996V6.4H0.599609V9.6Z'%20fill='%23E6273E'/%3e%3c/g%3e%3c/svg%3e)
Product origin: United Kingdom
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
Similar suggestions by Bolo
More from this brand
Similar items from “Air Compressors”
Share with
X
Or share with link
https://bolo.com/