About this item:
4.7 out of 5
93.85% of customers are satisfied
5.0 out of 5 stars A fun, difficult project which requires a lot of patience.
I bought this over 4 months ago, I was very enthusiastic Initially about it since it was during the lockdown and I needed to something to do. It went for couple of days and then I put it away and has been away since only till last week that I had the chance to finish it off. I'm very proud of all the work I've put into it, it has made me a pro at soldering and the end result is beautiful. I'd highly recommend it to someone looking for a little project with a lot of patience and some soldering skills. Great fun.
5.0 out of 5 stars Superb kit for practising
Love the kit... Easy enough to follow instructions. Good quality PCB, plentiful LED's. And great for practising your soldering skills. I've use about 60grams of 0.8mm solder (question that seems to pop up a lot).I'm buying the bigger version of this as soon as i can afford it as i am enjoying it a lot!You will have to be patient though as bending each LED by hand can get quite tedious.Also good tip... Take your time with bending them and do it as precise as possible... Same goes for soldering. It will safe you a lot of tweaking on later stages of your build :)
5.0 out of 5 stars GREAT PRODUCT BEAUTIFUL LED CUBE
Took some putting together and I would suggest watching some Youtube videos to assist.When completed made a stunning LED light effect cube.Not for beginneers but not to difficult just dont expect to get it bulit in a day.Dint connect to PC to software but maybe will one day.Brought the acylic case as finishes a great project
4.0 out of 5 stars A challenge.
Still in the process of building this. Making a panel a day that takes about four hours. The instructions are good and the you tube videos are a boon. I have made 8 panels however I am rebuilding the first two as they came out badly. They guy who says it can be built in 10 hours must be super human !. It is a challenging project. I hope the results will live up to expectations. I will review the finished device when it is up and running. I think it's good value as the quality is excellent.
5.0 out of 5 stars What an awesome project!
I wanted to make a 8x8x8 cube ever since I saw one many years ago, but was put off by the circuit board elements and buying the right parts etc, it just got put on my "to do" list.When I saw this, I got excited! It has enough elements to be a decent challenge to a complete novice, but it is absolutely doable, the Printed Circuit Board (PCB) has all the electronics already installed and all the components you need are supplied. You will need your own soldering equipment, but a cheap £10-15 kit will see you to the end of the project.A few tips that may be helpful along the way:The paper guide included is not orientated the same way as the video on YouTube, but do watch the video as it takes you through everything step by step, once you have watched; it the paper guide is all you need to follow.Test each layer as you complete it (using supplied wires and testing connections on the PCB)! Repairing connections once the cube is assembled is not very easy.I cut a 2.3cm strip out of the box it came in to use as a spacer when assembling the layers, it was helpful to keep everything neat.If you have bought the clear housing to put around it (sold separately, but definitely recommended) put the "feet" on before you fully solder the cube together as the LEDs make it a bit tricky to tighten.The cable that connects to the PC for programming had the jumpers in the wrong position, but if you follow the video and printed instructions, you will pick up any errors easily, as I did.Programming: This gave me a bit of a head-scratching moment (temporarily), between the videos not having a commentary and the printed instructions having been translated, you really do need to watch/read the instructions carefully, but all the information is there and one morning of concentration had me able to create and upload my own creations to my cube with ease. I used my Windows 10 laptop, you just need to make sure you download and install the DirectX9 software to allow it to work. The only other thing is that you can save your project, but the HEX file you need to upload to your cube is created by selecting File>Compile which creates an Output.Hex file that will have the time and date you created it in the file info, THIS is what you upload to the cube to launch your custom creations.All in all, I LOVED this project and am now eyeing up the 16x16x16 cube!
5.0 out of 5 stars Good Quality Amazing Piece of Kit!
If you love electronic projects/diy/soldering, then you should love this product. Excellent quality components and although the instructions are a little hard to follow, with a bit of focus it's relatively straightforward.Great stock animations and I shall look forward to programming my own.
3.0 out of 5 stars Great but make sure you know which version your buying
The description is a bit vague. The instructions have to be downloaded and there are a large number of versions and the one I bought the instructions were not commonly available. There are different colour led versions so be careful if you are expecting a specific colour. Build quality good and a a great build project.
5.0 out of 5 stars Excellent Project
The more time you take in assembling, the better the result. It's not a project to rush. If you get the multi-colour version, I'd strongly suggest working with only one colour at a time, and labelling each panel as you finish it. Make sure the eight LED panels are all working properly before final assembly. That said, the finished product gives a stunning display.
Top
Ottimo prodotto
Nettes kleines Projekt
Ich hab den 8x8x8-Würfel in der Multicolor-Variante gebaut.Lieferumfang:- absurd viele LEDs (sehr viel mehr als man braucht)- Hauptplatine- alle erforderlichen Kabel, Drähte, etc..- Biegehilfe- AnleitungNicht im Lieferumfang:- USB-Netzteil mit 5V und mind. 2A (muss man extra kaufen, oder man hat noch eins rumliegen)- Acryl-Gehäuse (muss man ebenfalls extra kaufen, ist aber absoluter Pflichtkauf, wenn man längere Zeit Freude am Würfel haben möchte)Was man sonst noch braucht:- qualitativ guter Lötkolben (25W reichen dicke) oder besser eine regelbare Lötstation- bleifreies Lötzinn- Entlötpumpe oder Entlötlize- Elektronik-Seitenschneider- kleine Flachzange (besser zwei)- Knopfzelle (1,2 - 1,5V) zum Prüfen der LEDs- Ausdauer, Geduld, Ruhe, Zeit, gute Musikfür das Gehäuse (optional):- Kreuzschlitzschraubendreher (PH0)- Stoffhandschuhe, damit man beim Zusammenbauen innen keine Fingerabdrücke hinterlässtAnspruch:Durchaus für Anfänger geeignet. Bei Kindern sollte jemand älteres eventuell Hilfestellung leisten, aber für Jugendliche mit entsprechenden Ambitionen ist der Würfel hier echt ein Kinderspiel. Für alte Säcke wie mich war das eine erholsame Abwechslung zum Arbeitsalltag.Technisch wird nicht viel verlangt. Elektronikkenntnisse sind absolut nicht erforderlich. Mehr als bei einer Diode die Anode (l_A_nger Draht) und die Kathode (_K_urzer Draht) voneinander unterscheiden zu können, ist nicht erforderlich und selbst das ist in der Anleitung noch mal aus verschiedenen Blickwinkeln deppensicher fotografiert worden. Wer daran scheitert, sollte eventuell Schuhe mit Klettverschluss in Erwägung ziehen.Die gedruckte, reichhaltig bebilderte, deutschsprachige Anleitung ist klar und unmissverständlich geschrieben. Wenn man ihr schrittweise folgt, kann man wirklich nichts mehr falsch machen.Handwerklich sollte man halt in der Lage sein, einigermaßen sauber und ordentlich löten zu können. Sonst sieht das Ergebnis am Ende nicht besonders schön aus.Auch wenn genug LEDs dabei sind. Zum Löten lernen würde ich mir eventuell ein anderes Projekt aussuchen.Überhaupt ist Sauberkeit, Geduld und Ruhe der Schlüssel zum Erfolg. Neben ordentlichem Werkzeug natürlich.Zeitbedarf:Ich halte mich für einen recht erfahrenen Bastler und hab pro Ebene etwa eine Stunde benötigt und anschließend noch mal 2 Stunden dafür, alles zusammen zu setzen. Also insgesamt etwa 10h reine Arbeitszeit.Dabei hab ich aber auch nach der Fertigstellung jeder Reihe und jeder Ebene alle LEDs noch mal geprüft. Ich hatte zwar keinerlei Defekte, aber die feinen Lötstellen sind recht empfindlich und Nacharbeiten im fertigen Würfel wären nur unnötig lästig.Dazu hab ich an einer gewöhnlichen Knopfzelle zwei Drähte angelötet, und damit die LEDs dann angesteuert. Nicht schön, aber wirksam und deutlich bequemer als es über die Hauptplatine des Würfels zu machen. Die hat nämlich auch einen Prüfausgang - dafür einen dicken Daumen hoch an den Hersteller.Die SoftwareDie lassen wir mal fast unkommentiert. Etwas altbacken (braucht DirectX 9), Bedienung komplizierter als nötig, alles ziemlich umständlich. Für ein eigenes kleines "Programm" braucht man schon einiges an Zeit. Mangels direkter Kommunikation zwischen PC und Würfel, kann man auch nicht "mal schnell" was ausprobieren. Auch funktioniert das Ganze nur mit einem Windows-PC.Ein kleines Programm zum Erstellen der Steuerdatei könnte man sich sicher mit einigem Aufwand für eine andere Plattform selbst schreiben, aber spätestens bei der Datenübertragung braucht man den Treiber für das Programmiergerät. Bissel schade. Glücklicherweise hat der Dienst-Laptop noch Windows...Ergebnis:Wunderschön. Schon die mitgelieferten Sequenzen sind eine Augenweide.Weihnachten wird dieses Jahr noch mal bunter und blinkender.Eigene Sequenzen warten allerdings noch darauf umgesetzt zu werden.Als nächstes kommt der 16x16x16-Würfel dran. Freue mich schon drauf.
Wer gerne lötet.......
....hat Spaß an diesem Produkt. Bei der ersten Lieferung fehlten die blauen LEDs, diese wurden aber ohne Komplikationen nachgeliefert. Der Kundenservice war sehr freundlich und Zielorientiert. Die Lieferzeit für die Nachlieferung war allerdings lang (direkt aus China). Die Anleitung ist einfach und verständlich, die Verpackung ausreichend. Es hat alles funktioniert, keine LED war defekt. Die beigefügte Schablone zum biegen ist in meinen Augen schlecht, hier muss man selber basteln aber darum geht es ja auch irgendwie. Eine kleine Flachspitzzange erleichtert das Biegen sehr. Insgesamt hat es mir sehr viel Spaß gemacht und das Ergebnis sieht gut aus.
Schöner Bausatz
Der Würfel ist sehr schön und die Platine ist 1a verarbeitet. Das Löten macht viel Spaß, dauert aber einige Zeit. Das fertige Produkt ist dafür dann aber eine Augenweide....
Interessanter Artikel
LED‘s sind genug dabei. Mehr als genug. Genaues Arbeiten und Geduld ist sehr wichtig. Am Ende hat es sich gelohnt. Animationen habe ich noch keine vom PC auf den Würfel übertragen, aber das sollte laut Beschreibung recht leicht realisierbar sein. Mit der Schablone, die auch gleichzeitig das Mainboard ist, kann man den Würfel vernünftig bauen.
Visit the iCubeSmart Store
BHD33916
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United Kingdom
Or share with link
https://bolo.com/