Mophorn Motorcycle Shelter Shed Strong Frame Motorbike Garage Waterproof 106.3"x 41.3"x 61" Motorbike Cover Tent Scooter Shelter 120055 Hoods for Vehicles

Description:

About this item:

  • Waterproof & Anti-corrosion: The motorcycle cover is made of 600D polyester oxford fabric, can withstand the water pressure of 2000pa, wear-resistant and durable, 100% waterproof. The inner layer material is a polyurethane coating, with strong anti-corrosion performance. It can block the erosion of various chemicals on the vehicle, maintain the shape of the vehicle, and extend the service life.
  • Durable and Rugged Frame: The inside of our motorcycle shed is supported by 0.9" / 22 mm diameter steel tubes, stronger and more durable than ordinary motorcycle shelter. The frame can well keep the motorcycle from any external damage, and the foldable and extended feature makes the entire hood easier to carry and use. You can use it to provide better shelter for the vehicle.
  • Ventilated Storage Solution: The size of the steel frame structure is 133.9"x53.9"x76.8"/340x137x195 cm, which is larger and can accommodate 130" motorcycles, of course, bicycles, children's toys, wood, tools and equipment. Mesh ventilation windows on two sides with roll-up tie flaps are designed to facilitate airflow. Open them to retain dry after rains.
  • High Secure Factor: Our motorcycle tent can stand upright on the ground because of the frame, or it can be fixed on the ground with bolts to resist the more severe weather and natural environment. Of course, you can also configure a padlock (not included), so that there is double protection, no one can damage your vehicle, giving you 100% protection.
  • Easy to Set Up: This motorcycle storage has a simple structure and is very convenient to assemble. Coming with a carry bag, you can take it indoors or outdoors. No matter where it is placed, it will protect your vehicle intact. Not afraid of the rain and sun, dust and corrosion, it is the best choice to extend the life of the vehicle.
  • Motorcycle Motorbike Cover Motor Large Rain Waterproof Storage Shelter Bike Tent
    This Motorbike storage tent is ideal for protecting your motorcycle from all kinds of whether, dust and debris. This modified design is hard wearing and built to last, ensuring peace of mind that your bike is protected at all times.Made with 600D polyester oxford waterproof material and is easy to assemble and use. When shut it can be locked with a padlock (not included). The can be free standing or can be bolted down to a hard surface (bolts not included). Supplied with soft ground anchors. Will fit most standard motorcycles and cruisers.
    Feature
    Will fit standard and some larger motorbikes
    Weatherproof and hard wearing
    UV Sunlight Resistant
    Suitable as a permanent or temporary fixture
    Unique folding design
    Keeps motorcycle clean and protected
    Folds open and closed for easy access
    600D waterproof cover
    Sturdy metal frame
    Store motorcycles without material contact
    Security locking mechanisms (requires padlocks, not supplied)
    Easy to assemble
    Can be permanently fixed to concrete floor (expander bolts included)

    Specifications
    Size:106"(270cm)x41"(105cm) x 61"(155cm) (Kindly Note: This parameter is the dimension of the steel structure model. The actual size would be a bit larger after putting the cover.)
    Ride in Height: 50" ( Cover Size Specification:50 inch ride in height )
    Frame material: Galvanized coated steel poles
    Pipe: 22*0.8mm
    Material: Black Oxford 600D
    Color: Black

    Package Content
    1 X Motorbike Tent
    1 X Instruction manual

    Review:

    3.6 out of 5

    72.31% of customers are satisfied

    5.0 out of 5 stars Thunder Cat Shelter

    D.S. · 10 November 2024

    The media could not be loaded. Thunder Cat ShelterI bought this for my husband’s motorcycle. The 1st thing that impressed me was how long it was. There is also plenty of room either side with the bike inside.It was easy to put together, even with an injured back my husband put it together on his own in about an hour and a half.Although the very basic instructions are more of a guide than a manual (one piece of A5 paper) all the bits that were supposed to be in the box were there and only a couple of small spanners are required.The instruction advise that you weigh the back end down and we did this with two 10 kg weights.Most of the frame parts merely push-fit together apart from a couple of uprights that you need the spanner for. You could use one spanner and a pair of mole grips.The little windows are a bonus and the whole fabric cover which is quite thick is fitted to the frame using Velcro and plastic clips.When assembled it’s very large, over 100 inches and it is also very easy to lift up the end of the frame. The motorcycle is now nestled safely inside for the winter.

    1.0 out of 5 stars Cover is a very poor fit (see photo)

    L.P. · 9 May 2024

    Assembly was fine but as soon as there was rain it was obvious that the flat area of the roof was going to be a permanent puddle.Unfortunately as there was a delay in assembly the return window has closed.I would like to talk to the supplier but there is no ‘contact seller’ on the purchase page.Based on the experience so far I cannot recommend this shelter.

    5.0 out of 5 stars Good quality

    V. · 14 November 2024

    Nice quality, snug fit for my gsx1400, instruction needing re vamped, too small a writing and they had me building it back to front all sorted now

    4.0 out of 5 stars Bike shelter

    C.o.t...i.a.t.b.,.b.m.t.a.w.a.i.q.e...M.i.b.t.I.f.i.w.b.I.s.a.o.b.t.t.t.g.(.a.I.h.,.i.t.i.w.a.d.b.i.w.o.y.d.O.f.t.m.i.d. · 6 October 2024

    Decent for the price

    5.0 out of 5 stars Using as a cycle store canopy

    P.W. · 23 October 2024

    Using this shelter as intended would take a lot of space that we don't have in our back yard. I knew that when buying it and as it is not expensive, I wondered if I could adapt it as a canopy to cover two wall mounted cycle stands. I know the manufacturer cannot guarantee it for the adapted use, but I am pleased with the solution. I screwed half the base to the wall, trimmed the cover material and secured it to one outer hoop with cable ties, adding some thin wood strips to prevent the material ponding. It has survived several storms. The remainder of the strong material provides a cover for another bike, and the spare hoops are going to provide a good frame for nets to cover my fruit bushes! Satisfied customer.

    5.0 out of 5 stars A much needed motorbike housing, for my sports bike, easy to set up too & offers weather protection

    A.W. · 26 July 2024

    I am pleased with this affordable housing for my large sports motorbike, I have been looking at these for a while now, and after all that rain we had late 2023 early 2024, (almost 6 months of it), I really was starting to panic over my 'pride and joy' motorbike, because the existing cheap covers which wrap around the bike, still attract rain, dust and cold in winter. I assembled this at the side of the house, rather than the garden, as the side of the house has a tarmac drive, so easy to drill holes in the tarmac, and attach the housing with screws and "wall type" plugs.All I need to do now is lift the housing open, takes seconds, drive off, and on return, free wheel back intothe housing, wait a few minutes for the motorbike to cool down, and then close the lid of the housing, and that's it, perfect.

    3.0 out of 5 stars Not Fantastic

    H.B. · 4 December 2024

    The media could not be loaded. Quite easy to assemble.Leaks through the stitching.I haven't seen it's performance in the wind yet, but a storm is on the way.Quite a bit of condensation.I'm going to see how it performs, over the next few months.Use masonry plugs and screws instead of the provided anchors and nuts

    1.0 out of 5 stars Not stored properly!!!

    c. · 13 December 2024

    The media could not be loaded. Came completely rusted looks like it's either been left outside or been used

    Super wenn man keine Garage hat

    f.l. · 17 January 2024

    Die Motorradgarage macht einen super eindruck, und ist eine gute Lösung wenn man keine Garage oder ähnliche Unterstellmöglichkeit für sein Bike hat.Ich habe die Motorradgarage an 4 Stellen (2x hinten, jeweils 1x seitlich) im Steinboden festgebohrt, alternativ kann man auch gewichte drauflegen.Der Zusammenbau ist sehr einfach, solange man sich zu helfen weiß. Entweder eine 2. Person dazu holen oder etwas um die seitlichen Stangen aufrecht zu halten (ich habe die Hauswand und einen Gartenstuhl benutzt).Das einzige Manko ist die Bauanleitung, diese kann man eigentlich direkt wegschmeißen, es gibt viele Teile die beim Bau nicht benutzt werden und auch nirgendwo in der Anleitung erwähnt werden, bzw. wofür man diese benutzt. Rechtschreibfehler sind auch drin.Insgesamt trotzdem sehr zufrieden

    Fast perfekte Rollergarage

    T.K. · 9 April 2024

    Die Garage tut was sie soll. Die Plane ist sehr stabil und absolut wasserdicht. Auch das Gestänge ist gut verarbeitet und stabil. Leider ist die Farbe von Anfang an am abblättern. Mit besserer Lackierung währen es 5 Sterne.

    Preiswerte motorradgarage

    i. · 27 September 2023

    Das Paket wurde zügig geliefert. Allen Teile waren komplett vorhanden, die Bedienungsanleitung ist etwas spärlich und englisch, aber durchaus okay. Der Aufbau dauerte allerdings eine Stunde. Zu zweit, weil einer alleine das gleichzeitig kaum halten und stecken kann . Die Teile waren schwierig ineinander zu stecken, da die Halte Federn sehr schwer gängig sind. Die Stangen waren teilweise angerostet. Der Zellstoff hat schon microfeine Löcher, ob der gegen Regen schützt? Bleibt abzuwarten. Ansonsten gut Aufbauarbar, preislich sehr günstig und mein kyburz Trike passt in die m Garage perfekt rein.

    Gute und leicht bedienbare Faltgarage

    A.Q. · 5 August 2023

    Die Faltgarage wird in einem langen Karton geliefert. Die Bauanleitungen ist nicht schwer zu kapieren, man sollte aber ein wenig technisches Verständnis mitbringen. Dann ist sie in einer 1/2 Std. aufgebaut. Wählt aber eine deutlich größere Version, da sie sonst für euer Motorrad viel zu klein ist. Ich selbst habe eine DT 1100, die unter der XXL-Garage nicht reinpasst, obwohl die Abmessungen ausreichend wären. Bspw beim Überziehen bleibe ich immer am Windschild hängen und muss das Gestell im Gesamten anlupfen. Auch muss ich das Tocase abnehmen.

    Plane zu klein,lässt sich nicht aufbauen

    D.H.N. · 16 December 2023

    Hatte mir im Spätherbst obige Rollergarage für meine alte Vespa gekauft. Lieferung erfolge prompt, Paket in Ordnung.Aufgrund einer Baustelle an unserem Haus und den dann einfallenden Winter, kam ich erst jetzt zum Aufbauen.Gestänge montieren war kein Problem, wenn auch die Anleitung nicht durch Genauigkeit glänzt.Ansicht dann aber die Plane montieren wollte, kam ich auf keinen grünen Zweig. Nur wenn ich das Gestänge verkehrt positioniere, also den hinteren fixen Teil nach vorne in drehe, würde die Plane passen. Aufgrund des Aufbaues der Planenbefestigung am ersten Holm (vorne Schlaufe zum durchschieben, hinten Klettverschluss) kann ich die Plane auch nicht umdrehen.Bin nun ach schon ausserhalb der Reklamationszeit, und bei Bolo finde ich auch keinen Kontakt. Ärgerlich!!

    Mophorn Motorcycle Shelter Shed Strong Frame Motorbike Garage Waterproof 106.3"x 41.3"x 61" Motorbike Cover Tent Scooter Shelter 120055 Hoods for Vehicles

    3.8

    BHD132010

    Quantity:

    |

    Order today to get by

    Free delivery on orders over BHD 20

    Return and refund policies

    Product origin: United Kingdom

    All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.

    Similar suggestions by Bolo

    More from this brand

    Similar items from “Motorcycle Covers”