BeautyBooksElectronicsHome & KitchenSports & OutdoorsIndustrial & ScientificToys & Games
Choose your country
Delivery choices and times vary depending on your location
ANYCUBIC Wash and Cure 3 Station, 2 in 1 Wash & Cure Machine for ANYCUBIC Photon Mono Mars LCD/SLA/DLP Resin 3D Printing Models with Dual Cleaning Modes and Uniform Curing, Washing Size 165x100x180mm³

Description:

About this item:

  • 【Larger Size for Upgraded Capacity】Anycubic Wash & Cure 3’s maximum cleaning volume is up to 165*100*180mm³(3L), 42% larger than Wash & Cure 2.0. The total volume of the cleaning bucket has been expanded to 4L. The curing size has increased by 42%, up to 160*180 mm, to accommodate larger and more models for single post-processing session.
  • 【Localized Strengthening, Uniform Curing】The "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the local curing effect. By adopting a brand new arrangement of light beads and Lens light source, wash and cure 3’s curing uniformity has been enhanced by 20%, bringing in a more thorough and comprehensive curing of the entire model.
  • 【Dual-layer Design, IPA Saving】Anycubic wash and cure 3 machine adopts the double-layer PP material cleaning basket designed with two heights at 100mm and 165mm, to flexibly accommodate print platforms from 5.9" to 7.3". This design maximizes the efficiency of IPA usage.
  • 【Simple Operation, Quiet and Efficient】One click to select cleaning and curing dual mode & switch the Gooseneck light curing mode. Infinite rotary knob control, adjustable from 1 to 30 minutes at will. Besides, a more sealed structural design and software optimization help to reduce the noise interference generated during cleaning & curing, creating a quieter and more comfortable working environment.
  • 【Wide Compatibility】Enlarged size enables ANYCUBIC Wash & Cure 3 Station to be compatible with anycubic photon mono 2, mars 3 series, mars 4, mars 4 ultra and other consumer-grade resin 3D printers measuring 7.3'' and below available on the market.

    • Review:

    4.8 out of 5

    96.67% of customers are satisfied

    5.0 out of 5 stars You've tried the rest now try the best!

    M.H. · 9 January 2021

    The media could not be loaded. Anycubic Wash and Cure v2.0I've been resin printing now for almost three years, and I have tried most options available when it comes to cleaning and curing resin prints a lot are messy and a lot take up a lot of space. Not the Anycubic Wash and Cure 2.0.The Wash and Cure V2.0 is by far my favourite method so far its quick, simple and clean to use. Before i was using a 3L ultrasonic and a UV nail lamp box and although they gave good results they didn't have the convenience and cleanliness of the Wash and Cure V2.0.The construction seems solid with a metal base plate rather than plastic. The UV array works well with a decent cure speed while also having a turntable rotate at a decent speed with no stuttering. Resulting in a nice even cure across the model with very little effort from the user. Its also roughly the same size as Photon so doesn’t fill up your workspace.The cure container is large enough to fit the build plate with a full height print attached but can also be used with the basket provided for loose prints if required/wanted. It has a secure sealed lid also to prevent spills and evaporation of your cleaning agent. To cure on the plate you will require roughly 3.5L of your chosen cleaning agent (personally I use Isopropyl Alcohol).Models I’ve cleaned so far have no signs of white residue, glossy patches or sticky patches and I’ve been using a wash time of 15mins and cure time of 4 mins (wash time could probably be reduced but I’m in no rush and prefer to make sure they are clean)Controls are really simple and effective. 1 button to swap between wash and cure and a dial to alter time and start the cycle off.Overall I was sceptical coming in to this product but have been blown away by the ease and cleanliness of the process and the quality of the product Anycubic has produced. It is easily the best post processing solution I’ve used and well worth the price tag even at full RRP. Don’t waste your money buying all the others just buy one of these and be happy with the mess free simple process.

    5.0 out of 5 stars Just do it.

    T.B. · 25 August 2023

    I’m a hobbyist at resin printing. This means when I make a little time to try printing, I need it to be easy and fuss-free.In the photo is a previous typical attempt, with inadequate washing in a plastic pot, a toothbrush, and paper towel drying, before a UV nail lamp to cure.Pictured on the supports is the output from this machine. 3 minutes wash (after a 1 minute pre-rinse in some dirty IPA), air dry and then 3 minutes cure. Really clean results without any hassle.I thought my occasional use meant I couldn’t justify this machine, when the opposite is really the case.I use an Elegoo Mars printer. I chose the Anycubic wash machine because their online articles are very clear and I prefer the knob control to the touch buttons of the Elegoo version. I expect they work the same.

    5.0 out of 5 stars Great all in one machine

    J.B. · 20 January 2021

    The media could not be loaded. Un-packaging the wash and cure machine was similar to the anycubic photon printer, the custom packaging is excellent and keeps everything tight during shipping. Everything was perfect on arrival and no damage to the packaging or machine. I would like to note that there are three allen keys and a spare bearing included which i'm sure will be ideal in the future.I have used a small variety of resin printers and cleaning methods, My most common method is using two tubs filled with ipa. I would put the print onto the basket and rinse in the first tub then let the prints dry, after that I would transfer them to the second tub and rinse. As you can tell this is a long and messy process, The ANYCUBIC Wash and Cure 2.0 Dryer Machine solves these issues. It is also very quiet especially when compared to a sonic bath that we tried for a while and cleans the parts perfectly.This machine is lightweight but robust, just like their printers the wash and cure machine is very well built and not made of plastic like most other products on the market but still remains lightweight.As for operating the wash and cure 2.0 machine it couldn't be any simpler, the controls consist of 1 button for selecting the mode (Wash or cure) which has indicator lights to tell you what mode is selected. The right of the front timer display there is a knob/button that selects the desired time when turned and starts/stops the machine when pressed. This machine is super safe there is no chance of leaking ipa out of the container through a seal because it uses magnets to spin the metal agitator on the bottom of the tank making the container a fully sealed unit that can be removed at any time. When in curing mode the machine stops operating if the cover is removed which is a great feature to protect your eyes.I have placed the Wash and Cure Machine on a shelf at chest height which is not ideal due to the height. I would recommend keeping it at around hip height to make changing the tub over for the turntable easier and also for making it easier to remove the basket as well.I personally use IPA when rinsing and put parts in for around 15 mins and then rinse off with water, whilst the part drip dries i prep the turntable for curing the part which i put on for 5 minutes.This machine fits in well with the 6 anycubic photons i have and will be worked hard over its lifetime. The design looks great and even the colour scheme fits in well all round 10/10 for me.

    4.0 out of 5 stars Great when working - fault with mine

    T.M. · 4 July 2024

    This was great once I got it working and would give it 5 starsMine was faulty when it arrived as there was a lose socket inside the case to the control panelThat aside when I did get it working it makes life so easy when it comes to washing and curing your prints.

    5.0 out of 5 stars Easy clean up

    T.F. · 15 April 2024

    This makes cleaning and curing very easy. I've only used water washable resin so I can't comment on any others.

    5.0 out of 5 stars It works

    G.L. · 24 September 2024

    This is the second I have had sent to me the first one did not work so had to send it back, no big problem I ordered A new one & this one works fine, good little machine.

    Visit the ANYCUBIC Store

    ANYCUBIC Wash and Cure 3 Station, 2 in 1 Wash & Cure Machine for ANYCUBIC Photon Mono Mars LCD/SLA/DLP Resin 3D Printing Models with Dual Cleaning Modes and Uniform Curing, Washing Size 165x100x180mm³

    4.6

    BHD89460

    Quantity:

    |

    Order today to get by

    Free delivery on orders over BHD 20

    Return and refund policies

    Product origin: United Kingdom

    All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.

    Similar suggestions by Bolo

    More from this brand

    Similar items from “3D Printer Accessories”

    Business, Industry & Science

    3D Printing & Scanning

    3D Printer Parts & Accessories

    3D Printer Accessories

    Share with

    Or share with link

    https://bolo.com/