BeautyBooksElectronicsHome & KitchenSports & OutdoorsIndustrial & ScientificToys & Games
Choose your country
Delivery choices and times vary depending on your location
Hotline Games 2 Sets 3.0 Plus Rounded Edges Mouse Feet Skates Compatible With Logitech G502 Hero Wired RGB Gaming Mouse feet Replacement (0.7mm, Super Glide, PTFE) Pro Performance Upgrade

Description:

About this item:

  • [First integrated molding Rounded Edges mouse skates] 3.0 Plus Rounded Edges mouse skates were made by Hotline Games' exclusive SYN Technology. The product not only won't scratch mouse pad, but also makes the movement of the mouse smoother and more stable to the Rounded Edges mouse skates of other makers.
  • [New materials with better compatibility] The material of the product adds Hotline Games' exclusive lubricating on the base of 100% PTFE. Achieve precise and comfortable operation on different materials mouse pads such as cloth or nylon.
  • [New pure WHITE mouse skates] New pure white mouse skates launch officially. The color is more advanced, especially when used on a white mouse, the color matches well!
  • [Just size] Strictly designed according to real mouses, not only the shape, but also the thickness has been adjusted for every model. In addition, 3.0 Plus mouse skates were appropriately thickened after consider the mouse sensor's durability and accuracy carefully. (Tips: Mouse skates too thick will affect the accuracy of mouse sensor and cause frame skipping. So, 3.0 Plus mouse skates just thickened appropriately without affect the premise of mouse sensor.)
  • [Easy to use] All the useless scraps of Hotline Games mouse skates are pre-removed for easier use. Except the DIY version, other models are all pre-cut. You can remove the skates easier. New product promotion, the price will be restored after the promotion ends! Note: The new batch of product packaging will not contain cleaning wipes, and will be replaced with special cleaning cloths. The old and new products are being exchanged, specific details please refer to the products you receive.

    • 2Sets Hotline Games 3.0 Plus Rounded Curved Edges Mouse Feet Skates Compatible with Gaming Mouse feet Replacement

    Review:

    4.3 out of 5

    86.15% of customers are satisfied

    5.0 out of 5 stars Fast skates

    J. · 27 April 2024

    I use these skates on a cloth mousepad and the difference was immense, i still had the original skates on after 8 years and they were becoming sticky and worn out, these skates fixed my issue with that. Super easy to install probably took me about 5 minutes. Great value

    5.0 out of 5 stars works with skypad.gg

    M. · 6 October 2023

    works with skypad.gg really easy to put on would recommend when taking off old skates to open your mouse and deep clean it then put new ones on made of like a sponge/plastic material really smooth on skypad glass mousepad

    4.0 out of 5 stars Smooth.

    R. · 20 February 2023

    Replaced my old stock skates. Currently using these with an aluminium mouse pad and it glides effortlessly around it. I detracted one star because they're a bit expensive for what you get.

    5.0 out of 5 stars Skates

    B.C. · 17 September 2023

    Unreal , thought about buying a wireless mouse and new mousepad but came across these new skates , they’ve done exactly what I wanted , were really cheap and everything given felt high quality

    5.0 out of 5 stars Great

    S. · 17 March 2023

    Great

    5.0 out of 5 stars G502 HERO UPGRADE. Never miss a shot again..

    O. · 16 January 2022

    The glue is supreme stuff. Good quality 3M. Just make sure you clean your hands before gaming and after.

    5.0 out of 5 stars Better than stock

    L. · 2 January 2021

    They stick well and glide well

    2.0 out of 5 stars Wrong sizing

    A. · 24 August 2024

    The skates themself are alright but the 2 surrounding tye sensor are slightly too tall leading to some weird tracking. After removing them it was fine, but wouldn't recomend.

    SMOOTH

    A. · 7 May 2021

    this product looks great and feels AMAZING, it comes with 2 sets and 2 cleaning pads, a big microfiber cloth, as well as a pair of tweezers. I did not use the tweezers but the rest of the product is stunning, you simply pull the old feet off carefully, get rid of any old gunk, and place these on. If your mouse is getting a bit older this is a necessary upgrade

    Lot de 2 paires de patins à souris Hotline Games 3.0 Plus

    A. · 30 November 2020

    Lot de 2 paires de patins à souris Hotline Games 3.0 Plus... Le bout de la pince est un peu fragile, patins d'origibe retires relativement. Ces patins sont parfaits pour ma G502 et glissent bien.

    Very good skates

    M.o. · 5 March 2024

    Good price, mouse slides just like original new pads. Had to replace my old ones as they had become sticky

    First time replacing mouse feet -- These are quite good. Few things to know though.

    R. · 6 August 2021

    These work just as well as people say. I'm waiting for a Steelseries Qck cloth mousepad, but have my old setup of just a painted wood desk that has very minimal wood grain showing through and this skates across it a fair bit better than the original pads. The originals certainly weren't bad, hence why I never replaced them, but they had slightly pulled away in a couple of spots, making the adhesive underneath become little dust and gunk magnets, slowly needing more and more fingernail cleaning to make sure the feet were the only thing making contact again. It was time for a change...On removal of old feet/pads: To remove the feet, the instructions say to heat the pads, so I tried a heat gun at 250F for a while, which made it slightly easier to peel away, but only a bit and it wasn't like it was difficult without the heat. There was a matte/unreflective uneven layer of leftover adhesive underneath whether I heated it up a lot or not, so I just peeled the rest of the feet off without any heat applied.On cleaning/prep: I've learned over the years the critical importance of surface preparation for anything sticky, so I decided to remove the adhesive layer, partly because it was so uneven I couldn't imagine stiff feet would appreciate pockets of air underneath them while they bridged these islands of old/soft/crumbly adhesive. To humor the instructions, I took the coarse-grained microfiber cloth they sent and using it to "remove glue, sweat, and oils" but, as expected, this had little effect on the coarse, rubbery old adhesive. I went for rubbing alcohol and bits of folded paper towel and was able to easily get all of the adhesive off, needing a bit of extra time/technique in corners/bends, exposing the shiny plastic sheet/base layer underneath which would work great for adhering the new feet.On placement: These come with [plastic] tweezers, which I've seen some technicians use very deftly for precise placement of anything sticky like this, from precision-cut pieces to screen protectors on phones. While I've done a lot of work on devices, I've never become proficient with tweezer placement like they have, so I just use the method of lining up one edge or corner and slowly pushing down and outward on the piece from there. Assuming they've been cut right, they should line up perfectly, and these did, just inside the tiny raised edge that outlines the foot placement area. Some tiny directed pressure to fit a slightly mis-applied edge here and there and it's dynamite.As mentioned, this thing slides beautifully across the painted wood and, having owned the Steelseries Qck cloth mousepads before, I'm sure it will on there too. I had two of those before dumping the final, aging pad in a house move a while back and stopping competitive gaming, but I'm going back as I believe it prevented most of the random junk that accrues on the desk from being caught up in the mouse feet and I don't want these larger/taller feet, especially with the work I've put into them to need constant cleaning, so we'll see how this theory goes.Also, I'm rating adhesion as 5/5 even though I only put them on an hour ago, but I believe with the surface treatment and careful alignment I did they'll be just fine. Ease of installation is 5/5 because I don't know how much easier you can expect precise stuff like this to be, and context is of course important when judging.

    Dosent work

    J.A. · 7 October 2024

    Causes extreme mouse skipping/lagging, dont bother buying this

    Visit the Hotline Games Store

    Hotline Games 2 Sets 3.0 Plus Rounded Edges Mouse Feet Skates Compatible With Logitech G502 Hero Wired RGB Gaming Mouse feet Replacement (0.7mm, Super Glide, PTFE) Pro Performance Upgrade

    4.5

    BHD8517

    Quantity:

    |

    Order today to get by

    Free delivery on orders over BHD 20

    Return and refund policies

    Product origin: United Kingdom

    All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.

    Similar suggestions by Bolo

    More from this brand

    Similar items from “Gaming Mouse Pads”

    PC & Video Games

    PC

    Accessories

    Gaming Mouse Pads

    Share with

    Or share with link

    https://bolo.com/