Dual Monitor KVM Switch HDMI 2 Port 4K@60Hz, MLEEDA USB HDMI Extended Display Switcher for 2 Computers Share 2 Monitors and 4 USB 2.0 Hub,Desktop Controller and USB HDMI Cables Included

Description:

About this item:

  • 【KVM Switch Dual Monitor HDMI 2 Port】This Dual Monitor KVM switcher 2 monitors 2 computers allow you to control 2 PCs by only one set of keyboard & mouse,share 4 USB devices and 2 monitors(Extend display mode or copy display mode). Please note that the extended mode can output two different screens, and the copy mode can output two identical screens.
  • 【Ultra HD 4K@ 60Hz】2 port HDMI KVM switch dual monitor support input of different resolutions, such as 4K@60Hz, 1440P@60Hz and 1080P@60Hz or lower resolution. Note: if you need a 4K resolution , please use version 2.0 HDMI cable and make sure your computers and monitors support 4K !
  • 【KVM Switch with 4 USB 2.0 Ports】Dual monitors HDMI USB switcher with standard USB 2.0 port which can recognize wired/wireless keyboard mouse USB hard drive printer or other USB devices.please note that this KVM switch not compatible with HD Webcam and macbook pro well,so we don't recomand connect to our product.
  • 【Great Compatibility & 2 Switching Mode】MLEEDA KVM switch HDMI driver-free for Windows Mac OS and Linux.plug and play,no external power required. you can press the button on the panel or use the desktop controller(included) to switch the computers.LED indicate the active computer.
  • 【USB HDMI KVM With Wide Compatibility】Dual Monitor KVM support many kinds of input devices,such as PC,Laptop,Apple TV,PS3/PS4,Xbox.it is widely applied for Office,Multimedia Teaching,Meeting Room,etc.
  • 【Note】This dual monitor KVM switch requires each computer to have 2 HDMI output ports and supports extended display, Support DVI/VGA/DP/USB C to HDMI converter. If your computer only supports single display, then this product cannot help you get dual display function.
  • After connecting the computers and the monitors through KVM, you need to set the screen output mode on the computer (press Windows+P) and select the output mode in the pop-up window on the screen. Otherwise, only one of the two connected monitors has an image.
  • Review:

    4.0 out of 5

    80.00% of customers are satisfied

    5.0 out of 5 stars So Far So Good

    C. · 2 October 2024

    This was purchased to replace another unit that was also purchased on Bolo. Although the other unit worked reasonably well, after approximately a year it started to play up, main problems were caused on the power side, with the unit ruining its 5v power adapter. So I needed to replace.This unit fitted my requirements perfectly, and is a much smaller footprint to the one it replaced. One thing to note if using a single dongle for wireless mouse and keyboard, plug this into the mouse slot, else you might find your wireless keyboard and mouse will not work. So, as the review suggests - so far, so good but I will back to update if it does not live up to expectations!

    4.0 out of 5 stars Does the job.

    D. · 25 September 2024

    Wanted to switch between my work laptop and my home desktop quickly and this does a great job. I have the work laptop running through the HDMI port and the desktop through the DP and at one press of a button, I can switch between the two easily so they use the same keyboard, mouse and monitor. I also have a few other devices shared too via a USB 3.0 port hub.

    2.0 out of 5 stars Instructions are very poor

    N.a.D. · 29 October 2024

    It took four hours to get this working. The usb for the monitor and keyboard doesn’t work when plugged in. I have to remove and put in each computer every time. Instructions could have been far better.

    Neat, but small issues and no longer use (edit: issue fixed, using 2 of these two now)

    A.C. · 23 May 2023

    (older review: 4 stars, scroll down for my latest update)I work from home and have two monitors. My macbook has an HDMI port, but only one. Since I don't want the two monitors to mirror each other, I can't simply split the HDMI port into two HDMI connections.So I use a USB-C to HDMI cable. This works great on my macbook for personal use.Then I also have my work computer. Previously I was using a second macbook for work, but more recently, since I moved companies, I use a Windows laptop for work. Same issue: only one HDMI port. So I use another USB-C to HDMI cable.In order to swap, I grabbed two LG monitors. The LG monitor in question allows multiple HDMI inputs, and I can use the monitor's settings interface to swap between input sources.This is what I have been doing for a while. I got sick of it, so I did some googling and found out about KVM switches. So I gave this thing a shot. I love the switch thingy. It does add a bunch of wires to my setup, but maybe worth it for the nice switcher which is amazing. Although then I do need to see an LED on all the time, which is kind of annoying since I sleep in the same room. Minor issues at first. Gave this thing a chance for a while. It was working pretty good. One of the first things I noticed is because it swaps both computers at once, I lose the functionality to swap one monitor to my work laptop and one monitor to my personal laptop. I was missing this functionality, but it wasn't too bad. A bigger annoyance, is when switching, it would very often confuse which HDMI is the left screen and which HDMI is the right screen. It was very inconsistent regarding this and became a large issue that was eating a lot of time when I need to work and don't have time to fuss with monitor issues. I need to be able to just turn my monitor on when it's time to work and have the thing work. But instead it would have monitors swapped, and I'd need to swap over, then swap back to fix. Another issue I noticed is that on my personal computer it was began flickering, where it goes black, then comes back to normal again. It would do this a little, then work. Then over time the issue became more prominent where this flickering would go on for longer durations. It could just be the USB-C to HDMI cable. But when I go direct, I don't have this issue. When going direct, I sometimes might see it flicker once, when turning on the screen for the first time, then it's on, and stays on. But when I go through this box thingy, it keeps on flickering, and takes away from the experience I'm used to when using my personal laptop.I'm sure this box has better usages. I know the mouse and keyboard switcher would be great, but since I'm on Mac and on Windows, I don't want to use the same keyboard for both, so I just use it for the monitor swapping.I've read that using an USB-C to HDMI cable can amplify these sort of flickering issues. If laptops only provide one HDMI port, I'm not quite sure how to use this thing correctly without amplifying flickering issues. There's also the monitor confusion issues, where it would frequently confuse the left and right monitors. This might just be due to swapping both HDMI's at once. This doesn't usually happen to me when I swap one monitor at a time when I go direct through the LG input source switcher.Also my whole reason for having a switcher to begin with is to re-use my monitors for both work and personal use, due to limited desk space. And when we add more wires into the equation, along with finding a place to put this box, it takes up more room.I ended up just settling with my current LG HDMI input swapping built-in feature, when going direct.I'm sure there's better ways to achieve my optimal desired setup. But this thing was a fun ride which taught me a lot, and fun while it lasted. It's very possible one of my USB-C to HDMI cables is the real culprit, but I think the final straw for me it was just too many wires, and seeing an LED on all the time is too distracting when I need to focus on my work, and also when I need to sleep.I'm not totally upset or anything, I might give this thing a shot again another time when I want to do some more experimenting. But yeah, I think it was worth the learning experience for me and having something cool like this to play around with. It did mostly work though.Would I recommend this thing? Maybe. Definitely a cool factor about it. I don't think this is optimal setup for me, but I don't think the product is bad or anything, and I can see it being optimal for someone else.=== Edit / Update ===(newer review: 5 stars)While I encountered a small issue initially, I solved the issue and found out it actually wasn't the KVM's fault. Currently using two of these. I solved the flicker issue. That was because I needed a Mac dongle rather than a more standard general-purpose one. I wound up using Apple USB-C Digital AV Multiport Adapter This allows me to turn the Mac's USB-C into an HDMI, then together with Mac's HDMI port, I'm able to have two HDMI ports to work with for this KVM.I recently swapped out my LG monitors, and grabbed DoubleSight monitors with dual monitor stand.This doesn't have the input switcher, so I'm using the KVM switcher. This is working really well.My small issue now is a Mac issue where it doesn't seem to always remember which is the main monitor and which is the extended monitor. But I realize now that this has nothing to do with the KVM. This thing is really good. And the external wired controller button for swapping between monitors is a game-changer and really makes my setup work for toggling between my work and home computers.Although keep in mind there's a newer version of this product available. You might give that one a shot.

    Bom

    C.C. · 29 June 2024

    Serviu para o que eu precisava

    Makes my life easier

    L.L. · 9 June 2024

    Easy to install and working very well

    Great value... if it worked

    P.G. · 18 April 2023

    This works well. it WORKS with my mac pro M1 thunderbolt dock and tunderbolt -> Display port adapter my company provided. it WORKS with my windows gaming PC. It requires ZERO configuration, mucking with, etc. plug it in, and it starts working.it DOES NOT include EDID emulation. When you switch from PC 1 to PC 2, it disconnects the monitors from PC 1, and the OS on PC 1 will respond with disconnect actions, like moving windows to the laptop.The box includes two display port cables and two USB cables, all about 4 feet long. The wired remote cable is also about 4 feet long, and includes a disk of double-sided tape to stick it down with.Overall the quality exceeds my expectations. no EDID emulation sucks, but I didn't expect it at this price point.Update:I just threw the box away yestereday. the left monitor's started 'flickering' occasionally. its like a bad electrical connection or something. it's probably going to explode in a ball of fire.Update 2: when my PC comes out of standby, I hear the USB/hotplug disconnect sound and never get any video until I cycle the kvm switch back and forth. seems like more low quality electrical connections. I really think this is a piece of junk.

    Perfecto

    M.M. · 20 September 2024

    Es lo que se explica. Admite usar un hub para poder conectar los dos monitores. Es decir, del ordenador al KV.Solo viene con dos cables Hdmi, por lo que si quieres conectar 2 ordenadores a 2 monitores necesitas comprar otros 2 cables.Yo uso un teclado y un ratón que me permite conectarme a varios ordenadores cambiando de uno al otro directamente desde el teclado y ratón, por tanto no he realizado la conexión USB.Estoy contento, funciona bien y el equipo es lo que dice la descripción y enseñan las fotografías.

    Dual Monitor KVM Switch HDMI 2 Port 4K@60Hz, MLEEDA USB HDMI Extended Display Switcher for 2 Computers Share 2 Monitors and 4 USB 2.0 Hub,Desktop Controller and USB HDMI Cables Included

    4

    BHD46622

    Quantity:

    |

    Order today to get by

    Free delivery on orders over BHD 20

    Return and refund policies

    Product origin: United Kingdom

    All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.

    Similar suggestions by Bolo

    More from this brand

    Similar items from “KVM Switches”