About this item:
4.4 out of 5
88.00% of customers are satisfied
Great image
The screen is a little tricky to setup. Have to make sure the corners are all identically aligned. A small misalignment here (1/4" skew) means the screen cannot be successfully assembled. The resulting image is clear and bright even with overhead lights.An additional caution is that the screen shipped to me had the wrong label (D100 versus C100). Product support was fast and verified based on the metal frame and border of the screen material, that I had the right product but wrong label from the factory.
Incredible ALR
Not much else to say, this screen is incredible. It honestly wasn’t hard to set up, not sure if they have made improvements since the previous reviews but it’s like 16 screws, hand full of springs, and everything fit together perfectly. You can see from the picture with the lights on that the picture quality is amazing. That’s from an AWOL 3000 pro streaming YouTube TV.
Good product, great service
I bought the 120" ALR screen for AWOL VISION AU Direct. This came from China and arrived on time. Unfortunately the screen material did come with wrinkles across. The seller gave tips to rectify but unfortunately they didn't work. They didn't hesitate and sent out a new screen material, which was flawless. I also didn't have to send back the old screen.The seller was always in contact throughout the whole process. Always replied within 24 hours but usually quicker. I was kept up to date, and they made sure I ended up with a product I was happy with. Shout out to Winni, who looked after me.The product itself seems well built. Good viewing angles, and makes the projector watchable during the day. Instructions are ok. They did offer a video call service in case I needed further help, but I never used it. The wall brackets are flexible enough to place, so should suit most wall setups. The brackets also allow for some adjustments, if you only put one screw in, so you can make sure your frame is level before putting the second screw.
Really nice screen, perhaps not for my projector.
First impressions-------------------Full disclaimer here is that I do not have an ultra short throw laser projector. I was not aware of that technology until I got this screen and it made me look further. Now I need a $5000 projector I guess – a slight upgrade from my sub $100 LED projector shown. The current setup is a laptop -> VGA input -> Cheap Projector (on grey-purple walls). The screen is almost as dark as the walls, which was a surprise, but it’s described by the micro reflector structured surface in the manual.It’s HUGE and Beautiful (and smelly for 2 days)! We are building a new house and there is a wall with this screen’s name on it. However, I will not be disassembling this to move it. It was easy to build and install, but easy doesn’t mean simple. It was a tight space to build.This screen boasts some pretty large improvement numbers like 80% picture quality improvement as well as 95% light rejection from ceiling lights (CLR) but, I did not experience such a drastic improvement that I desperately craved. In fact it’s arguably worse especially with dark scenes. I am debating flipping the screen upside-down (yes the arrow is pointing up right now) and hanging and flipping my projector to try to use the reflectors to my advantage. I did my best to take the best images possible to really showcase the screen, but in one image you can clearly see the laptop screen and the projected image from only 8 feet away (not filling the screen for now) – it’s not bright. I’ve seen video examples of these screens and they look like 4k plasma from all angles in daylight etc.. I did not experience that. Again.. cheap projector; expected an improvement still though.Pros----- -Beautiful 120” screen -Technology designed for USTL Projectors -Easy to assemble(small oopsies in the manual) and mount -Superior quality -Thin profile, Light weight -Really sturdy build (for a screen and aluminum extruded frame)Cons------ -Harsh chemical smell for 2 days (Vinyl) -Did not improve picture quality for cheap LED projector as expectedConclusion-------------I definitely recommend this nice little product, I just can’t give it the fullest review as I lack half the technology to enjoy it correctly.. it did not correct my cheap projector’s poor image. This is no fault of this screen as it’s simply not designed for it. I’m disappointed, but excited to now start looking at a way more expensive projector than I need. LOL. I’ve seen examples of these and they are impressive.The assembly was pretty easy. All the parts where there, although floating around in some cases. I noticed in the manual that the fiberglass rods are labelled incorrectly for qty which made that section confusing. I also forgot the corner pieces, but it’s okay for now. Quick measurements with a laser level and it was hung in no time. Due to me expecting more out of this, making it arguably worse; now leading to costing more later to get the most out of it, I am giving a 3.5 stars, but I can’t give fractions so I am rounding up to 4 stars.
Great
This is my first foray into projectors (paired with the AWOL LTV-2500), so I wasn’t entirely sure what to expect, despite doing some major researching. So far, I’m very much in love with my new setup. Only a few minor gripes:1. Assembly was tricky. The instructions were clear enough, but there was one aspect of the assembly process that was a major pain. You stretch the edges of the fabric screen around the outside of the metal frame and then anchor it in place on the back side with a bunch of spring hooks. If you don’t get the screen centered PERFECTLY, you simply can’t get the final frame cover attached. I can’t see any reason for it to be so unforgiving - we were only off the slightest bit and can’t imagine it affecting the image at all. We had to go back through and detach every single hook and then very carefully reattach the hooks, ensuring that the screen was perfectly centered and didn’t shift at all - really painstaking and ultimately taking way longer than expected to finish assembling.2. If you’re hoping for the same kind of image you’d get on a flatscreen TV, you’ll want to lower your expectations just a bit. The resultant image is really great - crisp, colorful, and plenty bright - but it still has a slight ‘projector’ quality to it. In particular, it has the slightest shimmer/sparkle that reflects off the screen. It’s not a huge deal, and you pretty quickly forget about it, but it’s there.3. I’m still cringing a bit that I spent so much on this screen. It’s certainly nice, but it’s easily the same price as a nice flatscreen TV. I’m not entirely convinced it needs to cost this much.In the end, I don’t regret this purchase, but recommend making sure you know what you’re getting. Probably closer to 4.5 stars for me.
Visit the AWOL VISION Store
BHD801473
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United Kingdom
Or share with link
https://bolo.com/