BeautyBooksElectronicsHome & KitchenSports & OutdoorsIndustrial & ScientificToys & Games
Choose your country
Delivery choices and times vary depending on your location
TILTA Camera Shoulder Rig with Dual Rosette Handgrip, Dual Quick Release Baseplate and Soft Velcro Shoulder Pad, Lightweight Video Film Making System Kit for DSLR Camera and Camcorder TA-LSR-B

Description:

About this item:

  • 【CAMERA SHOULDER RIG】Tiltaing lightweight shoulder rig designed to provide a comfortable shoulder-mounted shooting experience, this shoulder rig adds stability while you’re shooting for an extended period of time so you can create crystal-clear videos.
  • 【MANFROTTO ARCA】The base of this rig features a Dual Manfrotto ARCA Baseplate, which allows you to use either systems’ quick release plate or the included two in one Manfrotto/ARCA Plate.
  • 【BETTER BALANCE】In the back of the rig you will also find a NATO Rail which allows you to mount counter weights and other accessories via a small adapter plate. This NATO Adapter will also allow you to mount the included Rear Shoulder Support Pad which provides an additional point of contact when operating.This baseplate can be removed when needed and other baseplates or dovetails can be mounted to the main plate of this shoulder rig via 1/4″-20 threads.
  • 【ADJUSTABLE ARMS】The adjustable, extendable rosette arms allow you to fine tune the length and angle of the hand grips for more comfortable operating in multiple positions.The rosette bridge also can rotate a full 360 degrees, allowing for this rig to be quickly folded up for transportation.
  • 【COMPATIBLE】with Most Camera Systems Including the DJI Ronin 4D. The extension arms feature a 1/4″-20 thread on the arm itself, allowing you to mount an external monitor via an articulating arm. This allows you to mount your monitor further away from you than would be possible when mounting to the camera body directly.

    • Review:

    4.1 out of 5

    82.86% of customers are satisfied

    5.0 out of 5 stars Really thoughtfully designed

    p. · 25 October 2022

    Ideal for a built-up mirrorless or DSLR, although I'm also using it for a tall and heavy DJI Ronin 4D rig. Well built and the included case is a nice touch. Combination Manfrotto/Arca Swiss baseplate is handy if, like me, you're mounting different camera bodies. Handles also slide left or right (albeit only in unison), which is genius as it brings both hands directly in front. Even though more expensive than the exchange rate suggests it might be in the UK, this nevertheless feels like good value against some of its competition.

    2.0 out of 5 stars Very good apart from one thing.

    g.h. · 16 July 2024

    This is a very nice camera rig brace which is extremely well made and designed. But there is one design flaw which meant I found it to be unusable and had to return which I really didn't want to do.The function which allows the rig to fold over and take up less space for storage relies on one tension wingnut. But, in the open mode this wingnut reaches the support before it provides secure fixing. This means the whole rig is slightly loose, or loose enough to get knocked out of its position which could easily happen when shooting and moving a camera around.The wingnut has a very small 3mm maybe hex key and I tried tightening this but as the material is soft alloy its easily damaged.All the other fixings are super tight, the rosette grips, the camera baseplate, the arms. This one fixing is kind of the lynch pin for stability so it seems sensible to have a very tight fixing here.However, one small wingnut that hits the rig before you can apply appropriate tension is a major design flaw. If this was improved I would definitely buy this again and use it

    BEst cheap shouldr rig I've tried

    B.P. · 25 June 2024

    I got this on an offer day, dont regret it,. its super comfortable

    Excellent

    G.V. · 27 January 2024

    Excellent produit, qualité des matériaux, finitions, c’est du tout bon !!

    Tilta TA-LSR-B - not what I expected

    F. · 13 July 2023

    First of all, I normally like most of the Tilta products. They have great manufacturing quality, durable colors and are usually rather thought-through. From my initial impression over the internet, I thought the Light Weight Shoulder Rig (LWSR) is a better and more ergonomic solution to the competition, but I quickly discovered I was terribly wrong.While the carrying case and its many storage compartments are great and the overall shoulder rig works well standalone, I think the everyday usability is not there yet. Here are my findings that make this shoulder rig a definite no-go for me:- The lever of the arca swiss and manfrotto base plate is always in the way of the battery compartment of most cameras. In this case, all Sony A7's.- The shoulder rig cannot be used as whole on regular tripod heads. You need to remove the shoulder pad and thus, also your V-mount or Gold mount battery plate. In this example, the shoulder rig is mounted on the Manfrotto Nitrotech head and has not a single inch of clearance to be adjusted.- Ok, now say you want to adjust the length of the rig. The according lever is basically always blocked by either the shoulder pad itself or the manfrotto arca swiss quick release plate. In my opinion, both levers, the one for the main plate and also the smaller one should have been moved to the left side to make room for swapping the batteries and to be able to adjust the shoulder rig length on the go.- The length of the grips can only be adjusted by 4cm. The additional rod length looked way longer on the pictures.- The dual quick release plate (fusion between arca swiss and Manfrotto depending on how you use it) has no support for 3/8 inch bolts as seen on many camera bodies and cages. You also need to use an allen key. Due to the limited space, it is not possible to use toolless options. The screws do also have a special one of a kind length, so once you lose them, you are in trouble on set.- No built in dual rod support for the front of the shoulder rig (matte boxes etc.)On top of that, but that's personal preference, I prefer using rubberized handles. The ones supplied with this kit are made of thick foam. The foam feels of rather good quality but no matter what, that foam will be damaged and gone sooner or later. For me, handling the shoulder rig with one hand feels very insecure with foam handles. I prefer the grippier and less elastic grip of rubber handles.Very sorry to draw the conclusion that this shoulder rig is no option for me. I don't understand how this product is supposed to work quickly and reliably in a hurry or with other third party accessories.

    tresè bien et matière solide

    L.C. · 9 May 2023

    Je le recommande à tous ceux et celles qui ont besoin d'un épaulière

    Qualité du produit

    J. · 31 March 2023

    D'une grande qualité de fabrication. Plaque de base Manfrotto/Arca très pratique. Ensemble complètement modulable.

    Visit the TILTAING Store

    TILTA Camera Shoulder Rig with Dual Rosette Handgrip, Dual Quick Release Baseplate and Soft Velcro Shoulder Pad, Lightweight Video Film Making System Kit for DSLR Camera and Camcorder TA-LSR-B

    4.2

    BHD287165

    Quantity:

    |

    Order today to get by

    Free delivery on orders over BHD 20

    Return and refund policies

    Product origin: United Kingdom

    All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.

    Similar suggestions by Bolo

    More from this brand

    Similar items from “Stabilisers & Supports”

    Camcorder Stabilisers & Supports

    Camera & Photo

    Accessories

    Camcorder & Video Accessories

    Stabilisers & Supports

    Share with

    Or share with link

    https://bolo.com/