Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
A riding toy and walker in one! This foot to floor ride on toy includes a kid-sized push bar. Little ones can ride themselves or use as a push toy. This push ride on toy car is ideal for use indoors or outdoors. The seat on the back is the perfect place for bringing along a favorite toy or pal (stuffed toy not included)
Brand Story
By Little Tikes
Review:
4.9 out of 5
98.18% of customers are satisfied
5.0 out of 5 stars Great little toddle bike
Was not as easy to put together as it should have been. None of the holes were big enough for any of the screws or metal rods. Had to get a screw gun out to make every hole bigger miso we could assemble it properly. Also hammering the other pieces together was a little tricky but not too hard that we couldn’t manage. After we had it built it was super cute and seems very sturdy. No sharp edges anywhere. Nothing that could cut or hurt baby. Was just the right height for baby. Doesn’t fall over. We like that it is simple without all the bell and whistles. Now days kids are over inundated with electronic devices and the need for constantly replacing batteries. Just a good ole bike a toddler can ride themselves.
5.0 out of 5 stars 1 year old son loves it!
My son absolutely loves this thing!Really well built and easy to assemble. Might take a little bit of force to get things to fit, but it feels really robust.One thing I would note: do not exceed the maximum weight rating. I sat on it and the plastic deformed near the rear axle... my bad.Works well for carpets, hard floors, or even outside in the grass.
5.0 out of 5 stars Kid loves its
It was a little difficult putting together (weird tools included) but with a little force got it done!
5.0 out of 5 stars Perfect Gift!
I recently purchased the Little Tikes Push and Ride Racer for my nephew, and it has been an absolute game-changer in his development. As soon as he laid eyes on it, his face lit up with excitement. What's incredible about this racer is its versatility—it serves both as a ride-on toy and a push walker.The sturdy construction and design make it perfect for little ones who are just starting to explore their mobility. The racer provides excellent support for my nephew as he learns to balance and take his first steps. The wide base ensures stability, giving him the confidence to push himself forward without fear of tipping over.Moreover, the vibrant colors and sleek design captivate his attention and keep him engaged for hours on end. The compact size is perfect for indoor play, allowing him to zoom around the house with ease.Overall, I couldn't be happier with this purchase. Not only has it brought immense joy to my nephew, but it has also played a crucial role in helping him develop his motor skills and coordination. I highly recommend the Little Tikes Push and Ride Racer to any parent or caregiver looking for a fun and functional toy that encourages physical activity and growth in their little ones.
4.0 out of 5 stars Great Push-Toy - Here are additional instructions!
I bought this for my son, who has been crawling for 2 1/2 months and seems close to walking.Pros: He loves it! This is a small, simple version of a push-toy/walker. It's great for apartment dwellers or folks who have limited space at home. It's small enough to fit well in my son's playspace, but large enough to support his weight. It's study, too - he's a rough 'n tumble kid, and the car has held up very well. My sister and best friend also bought Push & Rides, and all are still in perfect shape after four years of enthusiastic play.Cons: It's a pain to put together. The directions are all in pictures (whatever happened to using words in instructions??). I've assembled entire pieces of furniture with less frustration.I'm including my addendum to the instructions for those who want a little more guidance:Parts List:K (small, black) and O (large, gray) are tools. You'll need them to tighten the nuts, but will throw them out after assembly.M: red screws; G: white anchors; H: yellow endcapsThe rest of the parts list is clearly defined.Instructions:1-Pull the three metal bars out from the bottom portion of the car. You'll have two skinny bars (E) and one thicker bar (I).2-Take one of the skinny bars (E), and hammer one end into a small nut (J). It's easiest to do this if the nut is on top of a sturdy block. Do the same thing with the other skinny bar. You'll end up with two bars (E), each with one nut on one end. You'll have two nuts (J) left over. Set the bars aside to use in instruction #4.3-Put the white plastic hubcap into the indentation of the black wheel (do this with all four wheels).4-Take the skinny bar (E). Next to the nut (J), add the wheel so that the white portion is touching the nut, then add a washer to the other side of the wheel. Put the bar through the holes as shown, so that it acts as an axle.5-Once you have the bar (E) poking through the other side, add a washer and then a wheel. Now, you just need to add the last nut (J) to make sure the wheel stays on securely. Take the two small black capnut tools (K). Fit one capnut tool (K) over the nut that's already on the end of the skinny bar. Turn the car on its side, with the capnut tool (K) on the floor.6-Put the other nut (J) on top of the exposed end of the skinny bar. Place the other small black capnut tool (K) on top. Bang on it a few times with the hammer until both nuts (J) are securely locked onto the bar.7/8-Push the white plastic anchors (G) into place as shown.9-Hammer the yellow endcaps (H) into the handlebars.10-Hammer the thicker metal bar (I) into one of the the larger nuts (N).11-Put the bar (I) into the blue car base and add red handlebars as shown.12-Use the larger gray capnut tools (O) to hammer both nuts (N) onto the bar (I) securely.13-Pop a beer: you're finished!
5.0 out of 5 stars The little guy loves this!
My 1 yr old nephew is just learning how to walk. I was searching for something low to the ground, low center of gravity, and sturdy so he felt confident and comfortable using it as a walking aid. He hasn’t gotten on it yet but so far it’s one of his favorite toys!
Sturdy rider for toddlers
This riding toy was fairly easy to assemble. The only thing I would warn against is hammering the wheel lugs too tight. I had to remove the back wheels after I was done because they wouldn’t roll. Thankfully there were extra wheel lugs and the next time I gently tapped them on. My granddaughter loves it and pushes it around walking behind it. She’s not 2 yet and is just grasping the concept of sitting on it and pushing with her feet. A solid riding toy that I expect to last for all my grandkids!
Just a well designed product
My daughter is one year old and she loves this. The seat is big enough for baby to sit comfortably (she can even stand😂) and the slightly longer back is great for support and to push the car around. It’s just simple but well designed and a perfect first car for a baby.
Super sturdy push along
Nothing to dislike bought one for my son over thirty years ago it was a huge hit and so bought one for my grandson and again an even bigger hit 🌟🌟🌟🌟🌟
Very good and sturdy ride for younger babies
Very good and sturdy ride one for babies even just older than 9 months. The age range is from 9 months to 36 months. It's also quite low in height and stable, so my baby's going to learn very soon how to board and deboard it. The handles are easy to hold and my baby's able to maintain his balance on it, he's 10.5 months old. There are no pedals, because only babies older than 2 years will be able to manage pedalling and it's for younger babies. My baby's also able to use it as a walker by holding the yellow handle. The friction of the tires is just right and baby's not falling while pushing it. Currently I have to push him from the back as he hasn't learn to push himself, by placing his feet on the floor, but will probably learn soon. The assembly is complex, but my husband's family is very engineering oriented, so my father in law fixed it in less than 20 minutes using a hammer. The price is a little high as per indian market, but I wanted this only, as this's the sturdiest, most balanced and easiest to climb on and get off for babies as young as 9 months. I am justifying it as my baby's first birthday gift and I wanted to gift him an easy ride on.
Amazing
This helped my son learn how to walk it’s great
Visit the MGA Entertainment Store
Little Tikes Push and Ride Racer – (Amazon Exclusive), 22"L x 10"W x 17"H with screws
BHD25638
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
More from this brand
Similar items from “Push Ride-Ons”
Share with
X
Or share with link
https://bolo.com/