Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
Milton (#506) Original Dual Head Chuck Tire Inflator Gauge - 15" Hose
Milton Industries specializes in tire inflator gauges and this original S-506 dual chuck inflator gauge was the first gauge of its kind ever built in the industry. We were also the very first in the industry to offer replacement cartridges! Gauge and valve cartridges are both replaceable. This essential pneumatic tool is ideal for any vehicle trunk, home garage, or automotive shop. Dual head chuck inflator gauge is made of heavy duty construction which provides for long life, even under extreme use and conditions. Equipped with magnifying lens for full view of scale. 1/4" NPT air inlet.
USES: Auto, sport utility, truck, bicycle, motorsport, trailers, motor homes/5th wheels, wheelbarrows, golf carts, lawn tractors, motorcycles, ATVs, and more.
PRODUCT SPECIFICATIONS:
PSI: 10-160
Increments: 2 lb.
* kPa: 80-840 (available via special order)
Increments: 20 kPa
Threads: ⅜-24
1/4" NPT air inlet
INSTRUCTIONS FOR USE:
If using a dual head type tire chuck with an inflator gauge and notice air is escaping through the off-side once connected to the tire’s Schrader valve, simply release the trigger and remove the inflator from the Schrader/tire valve. Point the straight side of the outlet up into the air (make sure it’s not pointed at someone). Squeeze trigger, allow air to flow (gravity will cause the sealing valve to drop), and place the chuck end onto the Schrader/tire valve while air is still flowing. Air will start to flow into the tire.
Dual head type tire chucks are unable to inflate a completely flat (zero air pressure) tire. Tire air pressure would normally cause the sealing valve to move and seal the unused side of the chuck. However, if a tire has 0 air pressure, the self-sealing valve has no pressure to react to.
DRIVE SAFELY: Maintaining proper tire pressures improves vehicle handling, reduces risk of tire failure, improves fuel economy, and increases the life of your tires.
Review:
4.9 out of 5
98.46% of customers are satisfied
5.0 out of 5 stars Reliable and Accurate Tire Inflator
The dual head chuck makes it easy to use, and the 15" rubber hose provides flexibility. I appreciate the clear pressure gauge, which is accurate and easy to read. This tool has made inflating my tires a breeze.
5.0 out of 5 stars The best inflater I’ve used
There is no compression between this and the cheap ones you buy at local retailers. I’ve had many cheap ones. This one is solid built accurate, easy to read and sealed well when inflating tires. I’ll never use a crappy import again. I can’t recommend this enough. great product and well worth the price.
5.0 out of 5 stars Solidly built and works great.
Extremely convenient and well made.
5.0 out of 5 stars Solid and reliable
I like the solid well made design of this tire inflator.The gauge is spot on.I have saved so much time using this Air Inflator.Its a throw back to the days of a tool made to last.Buy it and save time.Pass it on that’s how long it’s gonna last.
4.0 out of 5 stars Quality you can feel, but gauge could be easier to read.
Built like a tank. Milton is quality and it shows. Easy to use, just press and hold the dual head to your tire stem and press the fill lever. This is not a locking chuck, so you will need to hold the head to the stem. The hose is plenty long and should reach dually tires. Due note that it is a bit heavy; don't accidentally swing the dual head into your vehicle! When I say it's built like a tank, I mean it.I wish the gauge on this inflator was a better range for passenger tires. 10PSI to 120 PSI is a very large range when all a passenger car needs is around 30PSI to 35PSI and maybe 60 PSI to 65 PSI for the spare. As such, I feel this inflator was designed more for trucks, hence the dual head design. Another thing to note is that the sight glass isn't the easiest to read, especially as I get older.My particular inflator gauge is accurate to around +/- 2 PSI. I tried to adjust it but I couldn't seem to make it much better. I still use a Accu-Gage H60X Professional Tire Pressure Gauge with Protective Rubber Guard (60 PSI) to verify the pressure after using this infiltrator. The Accu-gage is the same gauge the Car Talk guys recommend. If you want the made in the USA model, it's the Accu-Gage "M" Series - MH60X. The M Series is bigger, beefer, and cost a bit more. The Accu-gage of old used to all be made in the USA, but now only select models are.Don't get me wrong this works fine for cars, but if you are looking for precision measurements of the pressure, use a gauge that is calibrated for your pressure range. Remember that pressure gauges are most accurate in their middle region, so a 60 PSI gauge is best for passenger tires since you are most concerned about 30 to 35 PSI.
5.0 out of 5 stars great
Works greatr.
5.0 out of 5 stars It’s durable and performs well under pressure.
It’s durable and performs well under pressure.
5.0 out of 5 stars impressed with the quality
can't wait to actually use it
Good Product
Well engineered. Gauge is accurate. Tip is easy to place on the valve stem.
Comprar
Muy bueno. Se los recomiendo
Good quality
Shame the scale only shows PSI, they could easily fit a second metric scale. Otherwise perfect value for money. It replaces a clone that rusted up. This one has real brass parts and should last forever.
Very nice tire gauge!
I've been using this daily since I purchased it. For what it's worth, I've used other Milton products in the past before and never once have I ever encountered a problem, this tire chuck does not fall short of that reputation. I've tested the gauge on this unit up against some of my more expensive, highly accurate (read: $$$) racing-use tire gauges and it's very accurate. For the price, you can't go wrong, it's excellent!!! Don't bother with cheap junk, just buy one of these and have something you can depend on. The only thing that you should be careful of (as you should with any tire gauge) is that you DO NOT drop it.
Accurate gauge in an inflator for a change.
This product is good quality and has a very accurate gauge. I have tested the accuracy against two other high quality pressure gauges and this unit is spot on.
Visit the Milton Store
Milton S-506 Original Service Station Tire Inflator and Air Pressure Gauge, Dual Head Chuck, 1/4" NPT, 15" Rubber Hose, 10-160 PSI
BHD31605
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
Similar suggestions by Bolo
More from this brand
Similar items from “Tire Gauges”
Share with
X
Or share with link
https://bolo.com/