Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
Picture This: You’Re About To Start A Huge Weekend Project, Or If You Live In Colder Regions, Maybe Get Out There And Plow The Latest Snowstorm. You Check Your Hydraulic Jack (Or Snow Plow) But Notice It’S Been Leaking. Just What You Needed, Right? Wrong. Nobody Likes Being In A Situation Like This, And That’S Why We Created Bar’S Leaks Jack Oil With Stop Leak. Rather Than Forcing You To Spend Time And Money To Get Your Snow Plow Professionally Repaired, Bar’S Leaks Offers An Attractive Alternative: Hydraulic Jack Oil That Stops Leaks And Prevents You From Investing Time And Money Into A More Expensive Solution. It Is The Fastest, Safest Way To Bring Your Hydraulic Jack Or Plow Back To Life.The Bar’S Leaks Jack Oil With Stop Leak Is Specially Designed To Stop Seal And O-Ring Leaks Caused By Normal Jack Wear And Age. If You Find Yourself Having To Add Oil To Your Jack, It Most Likely Has A Leak. This Product Renews Old Jacks And Prevents Leaks And Seepage On Newer Jacks. Not To Mention, It Mixes With All Approved Hydraulic Jack Oils As Well As Snow Plow Fluids, It Works In All Floor And Bottle Jacks, And It’S Non-Corrosive, Non-Clogging And Non-Foaming.All Of Our Leak Repair Solutions Are The Result Of Careful Research, Design And Development Processes Undertaken By Our Team Of Top-Flight Chemical Engineers. Each Bar’S Leaks Product, Our Jack Oil With Top Leak Included, Is Designed To Represent The Utmost In Usability, Affordability And Effectiveness. When You Choose Bar’S Leaks For Your Jack Oil And Other Stop Leak Needs, You Can Always Count On Getting Performance That Works At A Price That Saves You Money.Keep A Bottle Of This Handy In Your Garage And You Can Rest Assured You’Ll Be Able To Quickly And Safely Get Your Show Back On The Road. No Worries, No Hassle.
Review:
4.3 out of 5
86.15% of customers are satisfied
5.0 out of 5 stars Quickly cured bad clutch master cylinder!
The clutch master cylinder failed on my 2012 Ford Focus. It leaked internally, causing the pedal to sink to the floor without disengaging the clutch, but with no loss of brake fluid. The same reservoir is used on the Focus to hold fluid for the brakes and the clutch. Bars Leaks jack oil with stop leak must NOT be put into the brake system reservoir because it can affect the boiling point of brake fluid and the viscosity thereby causing problems with the ABS system. Also, it will not mix with brake fluid. My solution was to segregate the clutch hydraulics from the brake system. I purchased from Bolo a Lefossi universal reservoir for motorcycle brake systems. I mounted this reservoir on the side of the battery box. I also bought from Bolo some 150 cc plastic syringes for fluid transfer. I cut the fluid line from the brake master cylinder reservoir to the clutch master cylinder fluid intake nipple. I plugged the output nipple on the brake master cylinder reservoir. I ran a hose from the remaining section of the fluid supply line to the clutch master cylinder up to the Lefossi reservoir. I then vacuumed out the remaining residual brake fluid in the clutch system using a manual brake vacuum pump which can be purchased from Bolo, by connecting the vacuum pump to the clutch bleed nipple. After that, I used the syringe to pump the Bars Leak jack fluid into the clutch bleed nipple. This filled the clutch hydraulic system and automatically bled the system of all air. I pumped in just enough jack fluid to fill the Lefossi reservoir (this is called reverse injection). Then I closed the clutch bleed nipple. The result, it took about 15 hours or so for the Bars Leak jack oil to do its magic and then the clutch worked perfectly! Bars company claims you should allow up to 3 days for the oil to recondition the seals of a hydraulic jack or snow plow system. They also insist that there are no solvents in the product which can ultimately dissolve the seals. Bars company does not specifically recommend the jack oil for use in clutch systems, and they caution against putting this stuff into the brake fluid in the brake reservoir. It can ruin your brakes, but I got great results with my clutch system after I segregated the brake hydraulics from the clutch hydraulics, and I saved almost $500!
5.0 out of 5 stars It works as expected
This is exactly what I needed to fix my floor jack. I just pumped the air out, putting the new oil and then good to go.
5.0 out of 5 stars Works well.
The floor jack goes up and down again and is not leaking. Although it wasn't leaking before. I purchased it because it needed oil. Seems to be a good quality.
4.0 out of 5 stars Easy and seems to work.
Great price and so far, works just fine.
5.0 out of 5 stars The stop leak worked!
This stuff stopped the small leak I had in my Jack, and got it working again like new.
5.0 out of 5 stars Excellent product
Took a little while to arrive but sealed a small seal seep. My floor jack functions properly and safely now.
5.0 out of 5 stars Did the job?
It’s a good product it did the job. I had a very slow surf seeping seal my jack and topped off the oil and I’ve seen no signs of any leak since very good product.
5.0 out of 5 stars Fixed my harbor freight 3ton Pittsburgh aluminum jack
Pump all old fluid out first,then manually lift jack all the way up,get a friend too help. Then open clinder screw and refill,it will take 3/4 of the bottle,pump air out.
Réparateur de jack
Très bon produit je suis satisfait
The oil of choice
Seems to be the brand of choice for floor Jacks. No complaints , seems to work fine.
Good service good price recommend.
ok
Oil plug
Didn’t work, Jack still leaks, would NOT recommend
Did not get the job done
Bought this to try and recondition the seals in a floor jack that could not hold it's position. It is not the oil for that job. I drained the old oil and filled itwith bar's and noticed no change.
Visit the Bar's Leaks Store
Bar's Leaks Jack Oil with Stop Leak - 12.5 oz
BHD5207
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
Similar suggestions by Bolo
More from this brand
Similar items from “Fuel Leak Detectors”
Share with
X
Or share with link
https://bolo.com/