About this item:
3.7 out of 5
73.33% of customers are satisfied
5.0 out of 5 stars Wish I tried this earlier! Read review for details!
I am writing this review in January 2019 while I bought this in December of 2014. My car had a catalytic converters p0420 code since early 2014, I knew that the problem was minimal because it never affected the power of the vehicle. After sitting on the shelf and paying over 350 dollars l for emissions waivers for the state of Washington. I decided to try it simply because I wanted to clear space in the closet.I followed the instructions but only used one can, After driving the car for a while the engine light went off. I’m baffled, happy, and regret not giving this a try 5 years ago!!!!With that said, the issue that I had must have been minimal, but this is totally worth giving it a try, I’ll update if I see any side effects.My car is a 2005 Dodge Grand Caravan with 117k miles on it now.
5.0 out of 5 stars Doesn't work or put it right didn't work for my car
It didn't do anything but stall my car ,so I wouldn't recommend or purchase. Not worth the money. Made my car smell like rotten eggs. It was easy to pour into the gas tank. But a waste of energy, money and time.
4.0 out of 5 stars Worked in combination with Cataclean to keep code clear.
So I had the P0430 code on 2005 Cadillac STS, which true dual exhaust meaning there are two catalytic converters and just the cost of those along would be well over $1000 before installation. Figured I would try Solder it as well as Cataclean together to see what happens. On almost full tank, I poured entire bottle of Solder it into the tank and drove as normal until reaching just under 1/4 tank at which point, per instructions on Cataclean, I put in bottle of that and drove per instructions before filling tank and continuing to drive as normal. For first 3 days, car kept throwing the same P0430 code and I kept clearing it out. On day 4, I drove into work and just out curiosity, I attempted to use my remote starter (this function will not work if there is a code stored in computer) and it started right up, meaning, there was no code. Usually the code would appear within minutes of clearing it if I started the car or drove it at all. So, these two products together, have at least had some improvement in clearing the P0430 code I was receiving. Long term, not sure at this point. But, I will most likely run the same two products again in a month or two and see what happens again.I will update with any new information. But as for now, I would rate this at 4 stars since it did what it was intended to do and I have definitely observed less of an odor from my exhaust.
3.0 out of 5 stars Amazing results.
I have a 2006 Scion xB. It had the engine light, trac off light and the VSC light on. I reset the codes and they all went off, but they were back on within a day or two. I checked he codes and it was a p0420, and reset them again, and they came back on in a day or two. I also could feel some back pressure on the engine. When I let off the gas i could feel it engine braking from all of the exhaust back pressure. I bought two cans of this thinking I could give it a real good clean with two cans in a row. I added the first can in about a half a tank (around 5 gallons of gas) and drove it. It has been a week and still no lights back on. Also the back pressure is reduced noticeably. I'm still driving on the same tank of gas and will probably run the second can through it for good measure on the next tank. I don't know for sure, but I seem to be getting way better gas mileage too. This is defiantly worth buying instead of paying for a new catylitic converter.Update: after the first can of cleaner the engine light came back on as soon as I ran on a normal tank of gas. I ran the second can through it and reset the lights, but they are back on again. The car is still running better, no complaint there, but I'm disappointed that the engine light keeps coming on. Getting great gas mileage now.
5.0 out of 5 stars Works!
Worked like a charm. Check engine light came on at 40,000 miles. Said replace catalytic converter. Put a can of this in and light went away a fee miles afterward and now 5,000 miles later still no check engine light.
1.0 out of 5 stars Didn't Work for Me
I have a 2001 Toyota Tacoma. The engine light came on one day, and I diagnosed it with a diagnosing unit I purchased from Bolo. The code pointed to a faulty catalytic converter. I drove 200 miles to another city a few days later and discovered that the light disappeared about half way but later reappeared after my return. Previously, the light had disappeared for a few miles after using Lucas fuel additive. I decided to give this product a try after reading about the positive experiences others have had with it. After receiving it, I added it to a half tank of fuel and drove for about 60 miles. I kept waiting for the engine light t go off, but it never did and has not disappeared since then. I noticed that some used two containers to achieve positive results, but I decided not to order another one.
5.0 out of 5 stars It worked for me !
No more check engine light on.
Five Stars
can not rate the product yet but used before and worked super TAKE NOTE UPDATE GOT RID OF CHECK ENGINE LIGHT AN PASSED IN FLYING COLOURS THE E TEST UPDATE FEB 16/15 THE BEST U CAN BUY B U T ITS A LOT CHEAPER IN STORES
Excellent result.
Cleared the check engine light after one tank of gas. Excellent result.
Don't recommend
It did worst to my engine, i thought it would clean the catalyct convertor. But i got a weird roaring sound coming from the engine after i pour this in the tank and drive for 100km, it decrease the power of the acceleration, i think it makes the catalyct worst.
1 ou 2 bouteilles
Besoin d'une autre bouteille pour de meilleurs résultats? Mon auto est de l'année 1988.
Not so great
Did not work for me better to use cataclean
Visit the Solder-It Store
BHD11666
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Or share with link
https://bolo.com/