Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
The OEMTOOLS 25036 2 oz One-Man Brake Bleeder Kit is designed to make brake bleeding a simple, one-person task. This brake bleeding kit includes everything you need for efficient brake fluid flushing, including a magnetic fluid reservoir, transparent brake bleeder tubing, and leak-free tapered fittings. Whether you're working with calipers, wheel cylinders, or a master cylinder, this brake line bleeder kit fits most vehicles, including motorcycles and trucks. The clear hose allows you to easily monitor brake fluid, ensuring an air-free brake line for optimal braking performance. This brake flush kit ensures a mess-free job, keeping brake fluid off your vehicle's components. The strong magnet attaches securely to any metallic surface, freeing your hands to focus on the task. With its durable construction and compact design, the OEMTOOLS 25036 brake system bleeding tools offers convenience and reliability for a range of brake maintenance tasks, from routine brake fluid flushes to full brake system bleeds.
From the Manufacturer
This Deluxe One Man Bleeder Kit contains a fluid collection bottle, a set of hoses and special tapered fittings. It is for use on calipers, wheel cylinders and master cylinders of all hydraulic systems. A strong magnet will firmly hold the bleeder bottle to the body of the vehicle or to any ferrous metal surface.
Review:
4.2 out of 5
83.08% of customers are satisfied
5.0 out of 5 stars Works great, reservoir could be a bit bigger
still works fine
5.0 out of 5 stars Good for motorcycles, I wouldn't use for a car
I used this to replace and bleed the brake fluid on my motorcycle. It worked great for that purpose. I stuck the magnet to the brake rotor. The bottle is small. For a motorcycle with relatively short brake lines, there isn't a lot of fluid to bleed out to remove the air so the small bottle is fine. If pushing a lot of fluid out for a car was needed, this small bottle would get annoying real fast.
4.0 out of 5 stars Solid little kit but not perfect.
This is a solid little kit, and despite having quite hard plastic in the tips, it actually sealed well.It is very small however. If you need to flush or do a major bleed such as after replacing all hard lines, it will be full in no time as the bottle is very small.This is clearly intended for a caliper swap or smaller/basic bleeds.The hoses are a shorter than I wish they were, but I made it work.The magnet in it is fairly weak also. Itll hold to flat sheet metal but anything else it struggles with, and the hardness/memory of the hoses will cause it to pop off.I can recommend it though, it helped me get the job done.
3.0 out of 5 stars Case is useless
The price is right, but the case is basically useless.The main reservoir which uses a cap with fittings sticking out on each end does not fit in it's designated location.The fittings stick out too much, and does not fit nicely inside the case.At first I thought this was the problem with why I could not latch the case closed, but no...The latches are poorly designed, so they interfere with the case closing properly!OEMTOOLS normally does a nice job with their cases, so this was a big head-scratcher...The sticker that identifies the contents just peels right off - it's not designed to stick to this type of plastic.On top of that, the (colored) sticker is used on the BOTTOM of the case...WHAT?The case is already embossed on top, but since there is no color contrast, it's very hard to read.Well, if you're going to use it a lot, you'll get used to it, right?We are talking about tools...right?So, items are functional, but the case is just a waste of time...
5.0 out of 5 stars Worked well for vacuum bleeding power steering
I bought this kit hoping one of the two adapters would fit on my power steering reservoir and one did. I recently replaced the power steering pump, high pressure hose and the steering rack on my 2016 GMC Acadia and the new pump was noisy after multiple attempts to bleed the system by turning the wheel from lock to lock. I bought this kit since I already had a hand vacuum pump (pump is NOT included with this kit) and figured I would try it. It definitely helped as the pump is quieter but not dead silent like it should be. There is a good chance the pump I got is defective and should probably be warrantied out. If that is the case this kit will be needed again.As far as using it to bleed and/or flush the brake fluid, you get three different attachments with the kit so it should cover most bleeder screws on calipers. I could see this working well to remove a stubborn air bubble trapped in a caliper but for a full on flush and bleed, the two person method or pressure bleeding from the master cylinder will work better. Gravity bleeding is also an option if you aren’t in a hurry.Nice little container, plenty of clear hose and an extra o-ring seal is included for the cap on the container. The power steering reservoir adapters are worth the $20 for this kit alone.
1.0 out of 5 stars Not impressed with content or quality
I realize that this is not a high tech instrument but quality is disappointing.First, upon opening one of the cups was partially crushed making it useless. The reason for the damage is that the hole for it in the blow molded storage case is not big enough to accept the cup. Making is sketchy right out of the box.
5.0 out of 5 stars Works Perfect
This one man bleeder worked just as it should. Do not believe the bad reviews. I bled my 2012 Nissan Frontier calipers that I had just replaced and had no problems. The kit arrived fast and all I needed to do was trim the 45 degree angles to a 90 degree on both ends of the clear hose. Push the correct green nozzle INTO your bleeder valve after you backed it off a few turns. Be sure to attach the clear drain bottle with magnet +6” above the caliper and leave the cover off of your master cylinder until finished. Start pumping the brake pedal, 2-3 times, check the clear hose and watch all the air bubbles going UP the clear hose to the drain bottle, pump the brake pedal 2-3 mores, top off master cylinder as needed. Continue until the clear hose has no bubbles, tighten bleeder valve, remove equipment, top off brake fluid to MAX, call it a day. Best $8 ever spent.
5.0 out of 5 stars Great kit and worth it when on sale.
No complaints from me. I specifically bought this kit to bleed the power steering system on my 4th Gen RAM 3500 after repairs. It's difficult to get the air out any other way with the hydrobooster, and the single Mopar bleeding adapter is more than double the cost of this set. The narrow cone fit the reservoir perfectly and I was able to easy maintain a vacuum to specification. Totally worth it to me. As for the complaint about the blow-molded case not holding the ported lid for the cup, that's true but is fixed simply by taking a flat file to the end of the ports. One stroke of the file to each port to remove a little material was all it took to snap into the case. Where this kit really shined is when I used it to bleed the hydrogears on my zero-turn mower after changing the filters and fluid!
Mal
Porque no es un tamaño grande esta super pequeño y para la función no sirve
Funciona bien
Lo utilicé para purgar bomba de la dirección hidráulica de una ford expeditión 2012, necesitas aparte la bomba de vacio
Great tool.
My steering was noisy when turning due to an air lock in the system. With this tool, I was able to rectify the issue and I am now a happy driver. Great tool and very easy to use. Wish it could come bundled with a handheld vacuum pump. I had to buy that separately. However, I like the quality of this product and seller was also quick to ship. Whole transaction was smooth. I would recommend buying from this seller.
Great product
Great product but I wish if the bottle was bigger.Loved the little magnet which is really handy.
Essential for brake job
Needed to bleed brakes after changing. Works well. Hose is a little stiff and bottle a bit small but works well for the job.
Visit the OEMTOOLS Store
OEMTOOLS 25036 Bleed-O-Matic One-Man Brake Bleeder Kit, Featuring An Opaque Brake Bleed Bottle / Transparent Hoses and Tapered Fittings, No Mess Brake Fluid Bleeding , Multi color(Packaging May Vary)
BHD4978
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
Similar suggestions by Bolo
More from this brand
Similar items from “Brake System Bleeding Tools”
Share with
X
Or share with link
https://bolo.com/