About this item:
4.5 out of 5
90.77% of customers are satisfied
5.0 out of 5 stars Super Exterior Product
I am a professional detailer and in my early days I used to be a CG everything guy but after a while I got tired of trying to figure out which product to use for 15 specific uses, only to figure out they are mostly the same with a different smell. I was using CG tire shine, then VRT, then a satin VRT, then I got tired of not getting the finish and longevity I was looking for. I saw barebones and read the label for a while. Seems like if it is design for undercarriage protection, safe for rubber, plastic, and trim, then it should be fine on tires. Well, this is probably the best tire dressing you will find. Same goes for Adams undercarriage Protectant. Same stuff I think.First it is very oily so if you dont want any lasting stains or slippery spots in your driveway, cover the area or try to clean any spots with a degreaser and pressure washer.Second, you can apply it with a MF towel, tire sponge, or just spray it on. I tend to just spray it on to the tire AND the wheel wells. It’s cheap enough to be liberal with. With just spraying it on, it applies a thick layer on there, let it dry. At first it looks a little streaky as it runs but it dries to a nice even matte finish. You can apply 2 coats about 30 minutes apart if you want more gloss and longevity.Third, the gloss. I dont like super shinny tires. This gives more of a rich deep finish rather than a shine. The way it works is the product seems to react with the oils in plastics and rubbers to recharge it and coat it. It brings out the original natural color plus the spray itself is dark.Forth, longevity. It lasts forever in terms of tire dressings. As long as you properly clean the tires and get them to as “degreased” as possible, the product just clings to tires and plastic wheel wells. Like I mentioned, its like it not only coats but rejuvenated those materials that dry out. On my personal car (BMW M4), I spray the tires and wheel wells with a strong degreaser like LA’s totally awesome or Wolf Degreaser. Sometimes I use a brush to agitate but most times I just spray it of with the pressure washer, let them fully dry, spray this stuff on, wipe any overspray away, let it dry and I’m done. Tires stay rich and dark though about 6 washes if I dont repeat this process and just wash the car. On my client’s cars, the tires and wheel wells stay perfect for about a month of every day driving before you can start to see dirt again. About 3 months before its completely gone.Fifth, is the versatility. I use this for long lasting finish and protection on tires and wheel wells but it also restores and/or protects plastic trim like black plastic Jeep fenders, bumpers, black plastic mirror caps, and various plastic trim. Obviously, its great for all other underbody parts but works magic for keeping road grime from building up on suspension and drivetrain parts. Just be smart where you spray. Out of curiosity, I cleaned and used a MF cloth to apply some to my KW coilovers on my M4 to see if it would keep them clean and debris free. Nothing worse than going to adjust ride height and having your collars seized up because of dirt, rocks, or rust. After 3 months, they looked almost untouched. I just wouldn’t go crazy with the stuff in those areas. Same thing with the engine bay. Need to add some rich finishing details to all that plastic they stick under there now. No problem. I thought the heat might mess with it a little but it was absolutely fine. I also thought that maybe since it was kind of thick and oily that dust would stick. Nope. After it dries, you get real protective qualities and it lasts for about 2-3 months under the hood before dust will start to gather. Can get a little streaky on metal pieces under the hood if you accidentally get some on there.ONE NEGATIVE. You can just keep spraying it on the tires and other rubber without cleaning and it works just fine but over about 6 months, I noticed that my tire sidewalls started to become slightly hard. They weren’t dried out and performance wasn’t impacted. No cracking, splits, or tears but I could feel the product buildup in to something similar to a shell or the hard crystaling of ceramic if left out. hard to describe. Nothing major but on my next set of tires I just made sure to degrease and scrub the tires every 2-3 months and then add barebones and its fine.
5.0 out of 5 stars This stuff is GREAT!
Looks good, goes on easily, and is a good value. It addresses an area of car cleaning that is a bit of a pet peeve of mine. You know how people look at other peoples' shoes and then judge them by them (brand, quality, style, cleanliness, etc.), well, I judge car owners by how well they pay attention to the cleaning of their wheel wells and undercarriage. I know this sounds strange, perhaps even neurotic, but I look at the car surfaces that generally aren't a focus to see if the owner is paying attention to the details. Kind of like judging a 5-star restaurant not by the food, but by the cleanliness of the bathrooms. I look at ancillary details, and this undercarriage spray WORKS REALLY WELL, doesn't attract a lot of dirt, spreads out on its own, doesn't damage plastic, paint, or other surfaces, and addresses that car cleanliness area of concern I have just in case somebody looking at MY car is as detail-oriented and neurotic as I am!
5.0 out of 5 stars Nice looking after applying
The media could not be loaded. Works really good, i love how shiny it looks after applying it, the only problem with this was the sprayer didnt work but not a big deal i use another one
4.0 out of 5 stars Great product
Great product and lasts a good while. The sprayer is garbage though. I purchased a two pack and both sprayers stopped working immediately.
5.0 out of 5 stars This stuff is AMAZING!
To start, I'm a neat freak when it comes to my vehicles. I had never really though about my wheel wells until I recently lifted my truck. I would usually spray them down with another well know brand, and it would last maybe a couple days tops. I didn't mind because my truck sat way lower, so the wells weren't as noticeable.Fast-forward to a month or so later, that well known brand isn't cutting it. I started researching wheel well shine, and Bare bones showed up first. I had never used any of their products before. To say I was a bit skeptical was an understatement. After watching a few of their videos on the work I wanted done, I decided to give their product a try.Boy, what a difference! This stuff is like an oil, and it shines those wells up nicely...and it LASTS! I've gone almost 2 weeks (in the rain also) and this stuff is still almost as shiny as the first application! I'm VERY impressed with this stuff, and look forward to being a customer of theirs for a very long time. Who knows, this stuff may even replace the products I've known to love for years...and that speaks volumes!Give it a try, you WONT be disappointed! Sorry, I just had to gush about this stuff! It smells like grape soda too! What else is there to say!
5.0 out of 5 stars Worked perfectly
I love this stuff. Amazing for detailing show cars chassis. It's a must have for me
5.0 out of 5 stars Love this Product!
I am a repeat customer for this product, as well as several other Chemical Guys products. This is one of my favorites and use it every few months to keep those wheel wells looking great. Just a note of caution if you get a bottle and it doesn't spray well. On my most recent purchase this happened to me (first time actually having an issue). I found that when I removed the top that the tube had come loose from the spray nozzle. Put it back in place and put the top back on...result was product sprayed as expected.
1.0 out of 5 stars Spray Nozzle Broken
I cannot believe the dead spray nozzle issue has not been addressed. I’ll never buy this brand again. Too many options out there. Why are you shipping these broken nozzles?Please note that this product is just a non working spray version of the tire shine.
Chemical Guys products kick butt!!
Like all my chemical guys products i have in my arsenal( and there are many,many)lol it works as described. And as a bonus( and a really good bonus it is) they have videos on you tube showing you how to get the most out of your CG stuff. They also show you in the videos(and it's really not in their best interest)how much product is needed in each situation so you don't waste product and in turn money. Detailing products from any company are not cheap. All in all you cannot go wrong
Espray para Barro de Huesos
De los mejores que usado y de precio muy bueno gracias.
Super bon produit pour plastique et caoutchoucs
Super bon produit pour plastique et caoutchoucs, donne un fini comme neuf !
Makes inside fenders look nice.
BUT it took a very long time to get it. Over a month. As far as product it gives a nice dark look
Excelente
El producto es muy bueno para mantener los plásticos de la tolva, pero ya no he visto en este presentación.
Visit the Chemical Guys Store
BHD7685
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Or share with link
https://bolo.com/