About this item:
Fluval M200 Premium Aquarium Heater is quality manufactured in Europe using superior components and construction. Sleek and compact, the submersible heater provides exceptional performance and unsurpassed reliability.
4.5 out of 5
89.23% of customers are satisfied
5.0 out of 5 stars Good reliable heater.
This M series 200 watt heater is a bit overkill for my 32.5 gallon tank. But it works great!I however wouldn't rely on the temperature setting gauge on the device. The best way to properly setup a heater is to set it to come on at just the right temp you want it at. Then monitor the temps over the next few hours and raise or lower the dial to match the actual temperature you want. The dials are seldom that accurate on their own.Try to attach the suction cups near the top. Don't have the holder setting on the coil area as it can melt the plastic. Also don't let the heat bulb touch anything near it. It can damage whatever it touches and can be damaged if something is leaning on it when it turns on.Place this heater away from invertebrates and snails. They can be burned or killed if the heater turns on when they are crawling around on it.These M series Fluval heaters are good heaters and I've used different wattages of them for years. But if you use them, pay attention to your tank's temps. If they stick on, they can cook your inhabitants. If they don't turn on, your tank temp could also get too cold.These heaters also are not intended to change the temp of the tank water more than 10-15 degrees total over time. They should not be used for outside use or when the room temp is way below the temp you want your tank water. They are designed to heat a few degrees only.Be sure the glass tube is not cracked or broken. Water must not contact the inside of the tube.
5.0 out of 5 stars Holds the temperature well!
I bought this for my betta's fish tank. I check the temperature often and it seems to be holding the temp well! It is not too bulky, and the betta doesn't seem bothered by it. I recommend this heater!
5.0 out of 5 stars Works great!
This us a good heater and I like the subtle light on it.
4.0 out of 5 stars Easy and Reliable, but watch your thermometer.
I’m really happy with the Fluval M50 heater for my 9-gallon tank. It keeps the temperature pretty steady, with only minor fluctuations of a degree or two. The indicator light is a nice feature, so you know when it’s actively heating.One thing to watch out for is that it heats the water a bit more than what I’ve set it to. I have it set to 76°F, but the water temperature hovers around 81-82°F. Just be mindful of this when setting it up to avoid overheating your tank. Overall, it’s a solid heater and does a great job keeping my tank warm.
5.0 out of 5 stars Worth the money
Works great and looks better as well
5.0 out of 5 stars Great Quality Heater
The Fluval M150 Submersible Heater keeps your aquarium at the right temperature. It offers easy temperature adjustments and reliable performance.
1.0 out of 5 stars What happened to quality and reliability?
I just removed over 30% of the dirty water which I could have done a lot more, but didn’t thank heavens. I cleaned the tank and accessories to give it a fresh start for my new heater. The temperature dropped rapidly as I replaced the water but I had installed my new Fluval 100w heater for the 30 gallon tank I have. Then I started to panic as I was counting on the heater to bring it back up to the correct temperature. Instead, nothing.I followed the troubleshooting directions to no avail. In the return process, it asks if I’ve removed the item from the package and if I have the original packaging which I do, but it concerns me that they will just send it out to some other unsuspecting aquarium hobbyist. I highly recommend if you order this item, which unfortunately I cannot recommend, to test it out first before you did what I did. Make sure it’s covered as indicated in their directions in a container of water beforehand.My fish is 6 years old. I thought Fluval was a trusted brand. I also had issues with their HOB filter for this same tank. It clogs easily. I returned from a 10 day trip to Europe only to smell smoke coming from the room where my tanks are. The filter had overflowed and water ran down the back of the tank, onto my area rug and hardwood floor. Worst though, was it dripped onto my surge suppressor and was smoking! Ironically, the surge suppressor came from Bolo too as some obscure Prime Day deal. Well, that also was replaced with the trusted Belkin name. During this incident, I had a pet sitter come while I was gone so it’s not like I left them with no supervision but really?? Who knows how much longer until a fire could have broken out. This was during the time Fluval acquired Aqueon. And of course it wasn’t returnable through Bolo so I had to suck it up and buy another filter. But I went with the Tidal brand which I have in my 72 gallon tank. To get functioning, reliable items has been like rolling the proverbial rock up a hill. It’s the cost, time, and aggravation that is exhausting. I thought Fluval was a trusted brand? For me, it’s been problem after problem with several of their products and it’s just exasperating. I need a reliable aquarium heater. Not one I that I have to worry about. So now I have schlep this broken heater back to Staples and find a reliable heater. Like this shouldn’t be so hard.Oh, and if you pre-test it as I suggested, there is supposed to be an indicator light. I can’t say where it’s located as no light ever came on. But make sure your light works. And obviously you can feel when the heater warms.
5.0 out of 5 stars Great Heater
I have a Fish Room with 39 tanks, over time my old hang on the tank heaters died and I was forced to buy new heaters. I purchased a popular brand of heaters but have had too many of them fail that I started looking for a reliable heater at a fair price. The Fluval heaters get the job done. They work like they should and so far they have lasted for me. The numbers don't align with the real temperature but I use a laser thermometer to check the temperature and adjust the heater. The heater has a blue light to let you know when it is heating.
Works well
Well made heater (European), only the best!!Has kept my aquarium to the exact temperature .. so far, so good.
Buen calentador a buen precio preciso y confiable
Buen producto calidad que dura de la gran marca fluval solo que no me agrado que viniera abierto el empaque de ahi en fuera todo bien
Bom aquecedor aquário
Utilizo num aquário com 3 pequenas jovens tartarugas...correto grau de temperatura em relação ao escolhido...pode ser considerado excessivo para o meu pequeno aquário 40x20x17), mas cansei-me de comprar outros mais baratos, com tamanho menor, mas que tinham problemas com a efetiva temperatura da água: divergências quanto a graus de temperatura da água e a selecionada/indicada
Not transparent, too long
Works like advertised just not very transparent. There’s a bright led shine unfortunately. Returned it for an Aquael heater.
Magnifique et solide
Très bon chauffage, aucun regret sur son efficacité
Visit the Fluval Store
BHD17267
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Or share with link
https://bolo.com/