Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
Just me and my bump! Cherish your special pregnancy journey with Pearhead's belly casting kit. This non-toxic, 100% baby safe kit includes everything you need to make a pregnancy keepsake mold of your adorable baby bump. Each belly cast kit includes five rolls of plaster tape, belly casting lubricant, a plastic drop cloth, non-latex gloves, and sanding screen. The easy to follow instructions included walk you through creating your bump mold step by step. Start out by cutting strips from the plaster roll and dipping the strips in warm water, one at a time. Then place each strip onto the casting area. Overlap the strips and apply 3-4 layers to make the mold thick. Wait 5-10 minutes before removing the mold and let dry for a dry. Your belly cast mold will be finished before you know it and will be ready to decorate or display! You can even have some fun with your mold and have friends sign the finished product at your baby shower. Pearhead’s belly casting kit is the perfect gift for any expecting mom and a great way to remember your bump! Product dimensions: 8.875” W x 9.5” H x 3.25” D
From the Manufacturer
Now you can cherish forever the memories during your pregnancy with Pearhead's belly casting kit. Everything is included to easily capture the moments when that special bond just began with you and your baby.
Review:
4.9 out of 5
98.46% of customers are satisfied
5.0 out of 5 stars Easy & Fun
This was a lot of fun to make. The instructions were simple and everything was included.The final product was durable enough to hold our baby.
5.0 out of 5 stars Good casting kit
The cast kit was easy to use!Step 1: cut the strips - large strips for the main part of your belly, medium strips for the top and bottom of your belly and short strips for your breasts (I’m 5’ tall, 33 weeks pregnant, 168 LBs and had 1.5 rolls left over if that helps)Step 2: pour warm water in a medium to large size container and lay out the plastic sheet on the groundStep 3: VASELINE THE AREASYOU'LL BE COVERING BEFORE APPLICATION!!!STEP 4: sit somewhere comfortable - you’ll be there for about an hour!start with putting strips on the belly then work your way up to your boobs.Entire process takes about 1hr & 10min including cutting the strips and drying on your body before it’s hard enough to take it offSTEP 5: let dry for 24 hoursSTEP 6: cut, trim, sand it down to your likingSTEP 7: decorate if you choose to and enjoy!
5.0 out of 5 stars Great product! A few tips...
Very easy to use and came out great! Here's a few tips I learned in the process...1. Less water will make it dry quicker.2. If you choose to do breasts and want more support, you can use a bra, saran wrap, or lift your hands above your arms (just work quickly if you this method). Your bra can be washed but might not be quite the same so don't use your favorite one.3. Dont put plaster water down the drain. If it gets on your clothes, let it dry and pick most of it off before washing.4. Save a roll (or more) of the plaster gauze. After 1 day of letting it dry, lightly sand, trim edges, and do touch ups. You can see where it is very thin by holding it up to the light and also by feeling where it is less sturdy. Also cut some strips the long way for the edges of the cast. This is important!!5. For tight areas like under the breasts, cut strips in half the long way.Have fun!!
5.0 out of 5 stars great easy to use product
I thought the casting process was so much tougher than it actually is. I had a friend put it on me and the only steps we had to take was applying the lubricant jelly to belly then dipping the strips in water then molding. It begin drying pretty fast. It’s very messy but the include a plastic mat to place under you on the floor. I definitely would purchase this product again if needed
4.0 out of 5 stars Good product. Worked well.
This was quite straight forward to use. The plastic included came in handy as this was a very messy dusty process. The result was good. My husband and I were satisfied. Our first time trying it. Good product. I would suggest it to anyone considering. P.s. Make use of the Petroleum Jelly and put it on places high and low and side to side even if you think you won't put plaster cast there. Mine started falling off after about 15 minutes on it own which was cool because it was already semi dried a and hard. I started out sitting but my husband worked faster after I stood so I stood for bout 10 minutes after the initial 5 minutes of sitting. Also layering is important especially the edges and breast area. Xo
5.0 out of 5 stars Did the job.
The water need to be warm. If it gets cold, refresh the water. The plaster gets much smoother and sticks much better with warm water. The edges will be flimsy. The solution to this is going farther back than you need to with the ends then trimming off the excess before it’s dry. That’s what we did, and it worked fine. You can also reinforced the edges with extra strips once it’s dry. I didn’t have any problems with ours not drying or losing it’s shape. It was starting to dry before we were even done adding layers. It says to have four overlapping layers, which we did, so the structure is thick and strong. However, we let it dry on a ball so it wouldn’t lose its shape while setting. I just grabbed one of our kids’ balls that was the right size, cut off some of the tarp, and propped it up. No issues with it falling apart, staying wet, losing its shape, not wanting to stick to me, or anything like that— even with the very thick layer of lubricant I used. That doesn’t mean others didn’t get a defective set, but ours was totally fine. It took nowhere near two hours, though. Start to finish, it was within half an hour. I started a show on Netflix when we opened the kit and stopped it when I peeled the cast off and left to shower, so I’m sure. Haha.
5.0 out of 5 stars Perfect kit!
This kit was awesome!! It came with plenty of plaster rolls I was able to do 3 layers with 2 rolls leftover. It was so easy I did it all by myself. Dried super fast. Highly recommend. I can't wait to paint it!
5.0 out of 5 stars Super cool. A must buy!!!!
I purchased this to mold my breast before my breast reduction. It was messy but easy to use. I had fun and can't wait to decorate it. Make sure you use the Vaseline, some areas I forgot to and it hurt like hell trying to get off. I still have extra molding paper left. The mold will dry quickly. This is super cool and fun to use.
Easy to use, affordable and turned out so pretty!
I used this set to make a belly cast in my second pregnancy and it was so fun! Pretty easy to use but you should definitely have someone do it for you. My husband was doing the casting part and sitting still for so long was quite hard for me. But that might be because my husband is a perfectionist and took forever lol. Definitely enough material, we also had some left over.It turned out beautifully and my husband came up with the idea to turn it into a light!So stunning and quite an eye catcher!
Must buy product.
I have used this for both my pregnancies and I love the results each time. It's so easy to do and it comes with everything that you could need. It's a bit messy but the tarp included in the box saved a huge clean up. It gets hard quick which is a plus when standing when your heavily pregnant but you gotta work fast.
Sfizioso
Facile da usare
Absolute Kaufempfehlung
Total tolles Produkt! absoluten Pluspunkt gibt es für die sehr große Abdeckfolie, damit das drumherum nicht dreckig wird! Bin sehr zufrieden mit meinem Ergebnis und würde das Set immer wieder kaufen
Pour un très beau souvenir !
Très contente du résultat ! Facile à poser et rapidement sec ! Le kit est vraiment complet et il y a pas mal de bandes de plâtre pour pouvoir bien recouvrir les zones souhaitées.Juste pour info , je suis restée debout lors de la pose faite par mon mari. Je pense que le faire seule est assez compliqué pour un beau rendu.Super idée pour un beau souvenir !Je recommande +++
Visit the Pearhead Store
Pearhead Belly Casting Kit, Pregnancy Keepsake Making Kit, Easy DIY Plaster Cast Baby Bump Keepsake, Baby Gift For Expecting Moms and Ideal Nursery Decor, White
BHD12571
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
Similar suggestions by Bolo
More from this brand
Similar items from “Keepsakes”
Share with
X
Or share with link
https://bolo.com/
