About this item:
PowerStop is on a mission to deliver an easy way for any driver to upgrade their brakes - no matter where or how they use their vehicle. Our Z36 Truck & Tow Brake Upgrade Kit is recommended for trucks, 4x4s, and SUVs that not only work hard, but play hard as well. This brake pad and rotor kit comes with everything you need, including premium stainless-steel hardware, for an easy, bolt-on installation. The low-dust Ceramic brake pads are reinforced with Carbon-Fiber to provide severe-duty stopping power without sacrificing everyday drivability. These pads are paired with Drilled & Slotted rotors that keep brake temperatures down by maximizing heat dissipation, critical for those long mountain descents. Whether towing a boat or trailer, hauling for the jobsite, or tackling a tough off-road trail, get the easy and affordable, bolt-on performance upgrade with the Z36 Truck & Tow Brake Upgrade Kit.
4.8 out of 5
95.38% of customers are satisfied
5.0 out of 5 stars High quality brake pads and rotors
I have installed many different pad and rotor sets on many different vehicles, this set was top quality, It came with good instructions, and was a perfect fit. I chose powerstops heavy duty trailer towing set because we tow a camper with our Yukon and I wanted to have brakes that could handle heat and abuse if we were towing in the mountains or hills. I was impressed this kit came with new boots for the guide pins as well, as one of mine was looking a little rough, though removing the boots from the bracket was a chore (think a hammer and flat head) and installing them (pressed them in with a impact socket the fit over the metal part of the boot on my vise) was not easy, but that is the design of the brakes not of the kit, plus you don't want them coming loose. beyond that install was a breeze. They sent disc brake grease in the pack as well for the contact point to prevent squealing etc. but a little more would have been nice (especially if you do the boots because you will want to clean and regrease the slide pins), I have a tub of disc brake grease though so it was not issue, and you can get an additional pack at any parts store for next to nothing. I also appreciated the guide for bedding (braking in) the new pads and rotors. I know it seems like a step that people often don't do, but it is very important especially with the drilled and slotted rotors and ceramic pads. These we worth every penny, and I will be using powerstop brakes on anything i do in the future. Worth noting, when you finish the bedding procedure you will have a slight brake burning smell, don't be concerned this part of the process and is just the coatings burning off and getting the brakes bedded properly.
5.0 out of 5 stars Excellent brakes
Durable and tough these brakes will get you and whatever you’re towing stopped fast
5.0 out of 5 stars Impressive performance!
I’m really thrilled with how well these brakes are performing. These Power Stop brakes blow my old budget brakes from Centric out of the water. I’ve never had much confidence braking in my truck, but now the thing actually stops really well. Color me impressed. I won’t be buying anything, but Power Stop from here on out. Well worth the extra cost.I am still noticing a smell from the brake pads from heavy-ish braking. This is after the bedding procedure and around 500+ miles. There’s no excessive heat or brake dust so I’ll have to keep an eye on it. Brakes are performing well.
5.0 out of 5 stars Good stuff
Truck stops better than ever. Quality brake parts
4.0 out of 5 stars Pad to caliper fitment
I only bought the pads and rotors for my lifted silverado on 33s, but these were easy to install. After breaking the pads in according to the directions, they cut my braking distance down by a atleast 20-30% from my worn oem pads and rotors.I think a lot of people are noticing uneven wear because they don't fit the pads correctly. I'm only giving this kit a 4 out of 5 because even after cleaning the surface under the shims, the pads were still sticking in the forward position and wouldn't free-float back. Please make sure that you can easily press the pads to a closed position and let them return back to where they started. I had to take a file and break the edges on the metal backing plate. After cleaning them up I applied a high temp paint to seal them and reduce the chances of rust buildup. Other than that, this set works great and I highly recommend them as a cheap and effective upgrade to your lifted truck and I can't wait to see how they feel when I'm hauling a load
5.0 out of 5 stars Great replacement brakes
The replacement brakes pads and rotors were an exact match. Complete instructions and all parts needed to complete the job. Too early to know the life span, but working great so far.
5.0 out of 5 stars Best brakes for the money
I bought these brakes for the first time 3 years ago. Will never buy a different brake kit. Awesome brakes for the money. Very happy with dust, quality and looks. The rear brakes I installed 3+ years ago now still have no rust and the red calipers still look new.
5.0 out of 5 stars Quality
These are quality products and installation was was easy. Good directions with the install.
Horrible respuest delarte de powerstop
Onvidaron enviar las pastas me puse encontacto con powerstop y como no las conpre sirectamente con ellos me digieron q no era problema de ellos practicamente
Best brakes ever.
Best brakes ever purchased, have them on a 2013 Yukon XL and a 2010 Sierra 3500 and both stop on a dime. Haven't had to replace brake pads on the Sierra in almost 7 years now.
Solid
Perfect fitment, 2012 gmc sierra 4x4, they work good and im hard on em, pricey but well worth it. Zero brake dust, solid rippers
Easily installed myself and looks good
Brakes look very good, got all parts perfect, installation is easy, this was my first time hence had to watch many youtube videos. Truck runs good and no issues. Rear brake pads, install the ones with wear indicator to the inside. Just mentioning that as initially I was putting them in front and my calipers were not fitting. Small instruction specific to parts location may help newbie like me.
Great fit and quality
Great
Visit the Power Stop Store
BHD230427
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Or share with link
https://bolo.com/