Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
Review:
4.5 out of 5
89.09% of customers are satisfied
5.0 out of 5 stars Stable and easily adjustable even with 27 inch monitors.
Assembly was not too difficult. there are a few different pieces but most if not all of the tools were provided. There are small hex cap nuts that lock the monitor brackets in place that I tightened using a nut driver but other than that everything is accessible. Honestly, there was no need to tighten these down I am just used to working in offices where people try swapping out monitors when you are on vacation and if it is slightly difficult to remove then they will leave it alone but that is not part of this review. I installed this mount using 23 inch monitors and it worked very well until I found a good deal on some high quality 27 inch monitors. I was worried about the size and weight but neither was an issue. In fact I neglected writing this review for 6 years before I was looking to replace it with a fixed base stand. Frankly when I received the replacement stand I felt I would rather use the stand I have been using for the past 6 years as it is slightly better. I will research a way to make the mount a permanent fixture to the table since that is what I am going for now but there is no rush as the current stand is working fine. The reason for making the mount permanent needs to be pointed out that with the monitors extended forward past the base the base wants to tip forward. But this is only if you move it to an extreme position that it is a risk of tipping. But like I said I have been happily, blissfully ignorant of any issues with this stand for the past 6 years. If I can't figure a good way to make this a permanent mount then I guess I will have to change it out. Still thinking of using most of the parts that are transferable. I regret not finding the same brand when I bought the fixed mount.
5.0 out of 5 stars Works perfectly.
I bought a standing desk and my previous dual monitor stand did not have room to screw onto the back of the desk. I purchased this stand and it's super stable, capable of holding my screens at the same height of my attachable stand, and doesn't take up too much room on my desk. My desk faces out, and we walk past it all the time and it has not been an issue or fear of tipping it or knocking it over. I have brushed against it a few times and it has not budged or moved.
4.0 out of 5 stars Very nice stand. Some installation tips . . .
VIVO Dual LCD Monitor Free-Standing Desk Mount w/ Optional Bolt-Through / Stand Heavy Duty Fully Adjustable Fits 2 Screens up To 27" (STAND-V002F)My desk had a hole on the back for wires, etc. so I mounted it there and did not use the stand that came with the monitor. Installation was a snap, with what I considered to be a very nice instruction booklet. The booklet is printed on very nice glossy paper and is in English only, making it very easy to follow directions. Users who do not read English will have to get some help. All parts, screws, etc. were individually sealed in plastic bags, making it easy to sort them out for assembly. Nice job on this, VIVO.Now, two things that I figured out:Thing #1, after using the adjustment screw to raise the right monitor so that it was level with the left monitor (I had to raise it up as far as it would go, but it was enough), the right monitor became very wobbly on the VESA plate. There was a lot of slack once it was raised up. VIVO eagerly sent me another VESA plate, but this did nothing to fix the wobbling. I did find a solution, however, that was pretty easy. After raising the monitor up to the level of the other monitor with the adjustment screw, and before installing the cap nut, I got out the soldering gun and dripped solder down the area where the screw comes up through the plate. This filled up the gap in the hole and after putting the cap nut back on, the monitor is now as stable as the one that was not raised. The hole is oversized in order to make it easier to set the monitor on the stand, but it makes it wobble when raised up. I think the problem is that the cap nut 'bottoms out" on the screw before it can tighten things up. If VIVO would supply a regular nut instead of the cap nut, or a deeper cap nut, to use on the screw, this would likely eliminate this problem. If the monitor doesn't need to be raised, the cap nut secures the VESA plate nicely to the arm so that it doesn't wobble. I didn't feel like going out an getting the right size nut, so I just dripped solder in there. I proper nut would be much better.Now, I'm not an engineer of any sort, so this may all be way off base, but if you find your monitor wobbling after you raise it to match the other, you might want to look first at the cap nut which locks the VESA plate to the stand. That is what locks the monitor down and prevents wobbling. It's not there only to keep the monitor from accidentally coming off the stand. it also locks the VESA plate securely to the stand.Had I not had to work out the wobbling issue, this would definitely be a Five Star stand.Thing #2, The stand comes with all of the joint tension adjustments set very tight. After loosening up all of them, the stand became much more useful for me. I can now grab a monitor by it's bottom frame and drag it where I need it to be without struggling with it. The hinges are VERY loose now, but still secure. They don't wobble at all. If you plan to leave the monitors in place after you get set up, the tension is set pretty well. If you plan to move the monitors around like I do, you should consider releasing a LOT of the tension on the joints. Moving the monitor up close for photo editing has been a great benefit that I had not considered when I bought this stand. I though I was getting it just to have more room to clutter up my desk!Also, the stand comes with the three Allen wrenches needed to set up and adjust the stand. On the wire guide they put a place to store the three Allen wrenches. I thought that was a great idea.
5.0 out of 5 stars Works great!
I really enjoy this product, as it was much cheaper than other alternatives and works great. I have had no issues and was able to assemble it myself which was nice. My screens and office are much better now!
5.0 out of 5 stars It's perfect
Clap-clap-clap. That is how I feel about this stand.I was worried that it would be 1) Too big 2) Not enough maneuverability 3) Shabby build.It is none of those things. I can maneuver my monitors in almost any way that I want. The stand is sturdy, and it does not eat up as much room as my ruler presumed it would prior to my purchase.I LOVE this stand and highly recommend it to anyone!
5.0 out of 5 stars Very good but be careful when setting it up
It’s a very good dual stand, just be careful when getting it all set up so you don’t ruin your monitors or scratch them by accident. And make sure you have it situated the way you want it, have it be nice and tight preferably before moving it then you should be good. But as long as you do it right it’s SUUUUPER nice to have and you can have the monitors be fairly high up too. I will also say you can get away with using 2 different size monitors. I’m using a 31.5 inch curved monitor and a 24 inch non curved monitor. Can take a minute to set up but for me I got it to where I like it. IDEALLY have 2 of the same size monitor but again it is usable with 2 different sized ones. Before I forget the white one does look really good and the finish does look beautiful I don’t see any off white on mine or any bad things. (The base is also metal if anyone is wondering)
Very nice stand
I wanted this for my twin 24” monitors to get them off my desk. Unfortunately I did not check if they are VESA compatible, they aren’t.The stand is sturdy, nicely manufactured and would have easily fit my needs but I wasn’t prepared to buy two new monitors so the item was returned.If I ever need to replace my monitors then I will definitely buy this stand!
Excelente producto, muy resistente y útil.
Es un soporte muy fuerte y resistente, la verdad lo esperaba bueno pero rebasó mis expectativas. De muy fácil armado y uso, soporta de manera eficaz mis dos monitores y libera mucho espacio en mi escritorio.
Great product
I have two 21" inch screen, this stand holds them perfectly. It is very easy to assemble. The extra desk space the stand creates is extremely useful, plus my cats adore the extra space it creates (even though they still prefer my mousepad as a bed).It does feel like it can easily be tipped over forward, but maybe that's just me being paranoid of breaking two expensive screens.
Not very stable with 2 x 24in monitors
works perfect if you have the monitors flat it stable but if you angle the monitors the stands fall down. its basic physics. the stand is perfect when you add weight to it to ensure it doesnt fall when you angle toe monitors to far forward.
Entäschung Pur
Der Ständer fällt um und einstellen lässt sich der Ständer auch nicht richtig :(Mein Rat an alle, lasst die Finger von dem Produkt.
Visit the VIVO Store
VIVO STAND-V002F Dual LED LCD Monitor Free-Standing Desk Stand for 2 Screens up to 27 Inch Heavy-Duty Fully Adjustable Arms with Max VESA 100x100mm
BHD32163
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
Similar suggestions by Bolo
More from this brand
Similar items from “Monitor Arms”
Share with
X
Or share with link
https://bolo.com/