About this item:
5.0 out of 5
100.00% of customers are satisfied
5.0 out of 5 stars Perfect for On the Go - Easy to Store - Easy to Mod
I have been living close to a lake for a few years. I have just recently started taking up fishing as a hobby. I am by means no pro. Fishing from the bank just wasn't offering me any excitement. Yes, maybe a bite here and there, but the water is just too shallow to get anything good. Dock fishing was ok at best. I live near a man-made lake (dam) which all start off shallow for a 15 feet. Deeper water have more of a selection of fish.I searched online for used boats. Everything was out of my price range, or would take a lot of work to get it to be usable. Not to mention I would have to pull a boat trailer around and park it, or pay to store it. This may make sense to some, but I also live in an Apartment. I thought about a Boat Club. $299 a month for a year was steep with limited hours of operation. I don’t like reoccurring expenses. I came across the Intex Mariner 4 Inflatable Boat. It was not the cheapest inflatable, but it also wasn't the most expensive. It also featured 4 people. It would work perfect for the son, wife, and myself.After reading the reviews I was just a little hesitant. Some said the boat leaked air, others got holes in the boat. Spending this amount of money for one time and having problems didn't sound that great. Generally the reviews were great, but the negatives always seem to stand out. What I liked about this boat was that it would fit 4 people. Also it had a floor you can place in the boat to make it more sturdy. I decided to buy it and purchased away. I also ordered a motor mount, 40lb trolling motor, and battery box. I didn’t want to spend my time rowing. I wanted to enjoy the outing.The boat in a two days just in time for the weekend (thanks Prime)! The boat was packaged nicely. I unrolled the boat and inflated it using the hand pump. At first I thought I was going to take while, but It didn’t take more than 10 minutes to inflate. There wasn’t any leaks. I just make sure I had all the plugs screwed in snuggle with the rubber gasket properly. The floor fit perfectly in the boat. The boat looked nice. The motor mount and trolling motor looked great. I purchased a marine battery to use with the trolling motor.The real test was going to be on the open water. I loaded everything in the car with my fishing poles. I drove 14 minutes to the lake. I unpacked everything and began inflating. It was on a gravel surface. I was nervous with it being an inflatable boat, but it didn’t hurt it. I put the floor in and installed the motor mount and motor. I put the battery in and carried to the water. Yes the boat is heavy. I think it is around 120lbs to carry. With two or three people it is easy. You might can get a folding cart to take the boat to the lake, or carry the boat, then the floor separately. I placed the boat in the water. I got in the boat and I was off. It seems to float so that is good. The paddles are good to use to get away from shallow land. Also, good for backup if the battery were to die. After 15 minutes of being on the boat I was starting to feel comfortable and not worrying if we were going to sink. After the first two hours we decided to call it a day. It was windy. We made it to land and deflated the boat. It deflated quickly and was easy to roll up and store back in the trunk for the next adventure. I was excited about it. The boat seems to be well made. It is vary durable on the bottom. Dragging across sticks and rocks (within reason) are ok. I would always carry the air pump, patches, and vinyl boat glue on the boat at all times. Better to be prepared, then not to be.Now since the boat had a motor it is now a Motor Vehicle which it has to be registered with the state. I live in TN. I needed two things. 1. Proof of Origin and 2. Proof of Sale (Bolo). The Proof of Origin was available from the Intex website. You just enter your HULL ID number from the boat and it will generate one for you to print out. Going the DMV to get it registered was almost a hassle. Registering a new boat people seem to think that you purchased it from a boat dealer who does it automatically. No. It was purchased from Bolo. You paid taxes on it (if you have to) already. The Proof of Sale will show that. The DMV will not collect tax money in that case. Now, they have to do something special. They have to create an affidavit saying why you came in and have you sign it to register the boat. 1. The boat did not come with a motor. 2. You modified the boat with a motor. 3. The boat is now a motorized vehicle that must be register with the TWRA. They will print and you will sign. They will stamp a form saying you came here and all is well to mail to TWRA. Then after a few weeks you will get your registration.After going out on the lake a few times I decided I needed a few things. I needed an Anchor. The boat will drift in the wind. Getting a mushroom anchor seemed to help that. You can attach it to your motor mount, or make something to attach it to. The seats the boat came with are ok, but it is helpful to be able to swivel. I was researching boat chairs and I came across a modification website just for this type of boat. You can search for Intex Mariner 4 mods and find the same site. It came me some interesting things like making a wood floor and still make It fit in the trunk, how to install chairs, lights, ect. I am going to make a wood floor, add chairs, and add lights to boat for night. Also, people have trouble with registration numbers sticking the boat. You can get a patch with the registration online you glue to the boat, or make a sign you can hang from the rope. I found plastic (Gutter Gard Cover) for less than $5 that I cut to 4 x 24 that I put my registration on. As soon as I take it out I will take pictures.Overall for the price this boat is great. It makes it even greater that you can put it in the trunk of your car and take it anywhere.
5.0 out of 5 stars Great Craftsmanship at an Unbelievable Price.
Pro's: Solid Craftsmanship, material seems strong and resistant to puncturing. Inflates easily, and pump that comes with it is excellent. The solid floor insert, makes the board sturdy and legal on some waters. A motor can be easily attached with a $25 kit from Bolo. Has a keel which makes navigating waves easier. 5 separate air chambers, nice safety feature.Update:You can legally register this boat in Illinois. Just recently got all my paper work for it.Con's: Bag that comes with the boat is pretty flimsily and is starting to tear. When inflating the keel there is no measurement to let you know when that chamber is full. I just guess but I am surprised there is no mechanism to let you know if the keel is properly inflated since the other four chambers have a measurement device.I am constantly amazed at how amazing this boat is considering I only paid $232. I have taken this boat out ten times so far and never had one issue. I've had up to 4 grown adults on this boat but it is a tight fit. Three adults are pretty decent but two is ideal. I first took this boat out on the lake without a trolling motor with four adults - bad decision. I find rowing this boat rather difficult compared to other aluminum and wood boats I have rowed before. The next trip out I attached a 40 lbs Minn Kota trolling motor and my level of fun and adventure on this boat was vastly improved. I have taken this on several lakes and rivers including the Chicago River. Particularly on the rivers, I am glad I went with a 40 lbs thrust.I have heard others gripping about getting holes and punctures on this boat. I am not sure if they had a bad product and/or operator error to some degree. I pulled up on rocky shores and hit pieces of trees on the water. I have not had any problems thus far. Another person in this forum recommended putting a tarp down on the ground before you inflate and deflate this boat - I highly recommend that. I think that is where people are running into problems because when air is in the chambers of the boat it seems to be pretty impervious to punctures. I am still careful though even when it's inflated.For those wondering it takes me about 20 minutes to unload, inflate this boat, and attach the motor mount. The pump that comes with it works surprisingly well. I have nearly every accessory for this boat and was contemplating buying an automatic pump to inflate this boat. However, the pump works so well I decided not to. I followed another person's advice about inflating this boat. I inflate all the chambers to about 30 percent and then insert the plastic floor and motor mount. I then inflate to the recommend amount. The boat comes with a measuring ruler which lets you know when each chamber is full. When each chamber measures 10mm it is fully inflated.I have done 10 hours of research about boats in this price range. I will save you the hassle. At this price point, you cannot find a better deal on an inflatable boat. I highly recommend getting this boat over the Intex Excursion 5. The Excursion 5 has an appealing price point of approximately $130 and fits up to 5 people. It load capacity is higher as well. However, it does not have a factory solid floor insert. The Intex Mariner has a roll up PVC (I believe) floor insert which makes the boat floor solid. This is not only important for stability and function but on some lakes I have been on this is mandatory. I was stopped by the Forest Preserve Police and luckily I had the solid floor insert because the Officer initially thought I didn't have one. I think he wanted to give me a ticket which I heard is around $120. I live in Cook County, Illinois. Long story short, pay the extra $100 and get this boat. From my research, it is much better quality and also many lakes won't allow an inflatable without a solid floor insert. Hope that helps.
Great quality, well designed!
Finally had our first float down the river! It was an awesome experience in this raft. Plenty of room and the floor planks make it so stable. I chose this raft because of its robustness.. and it sure is jusy a level above anything else I saw, - unless you are willing to pay significantly more! Note that it is heavy due to the floor and heavy duty material. The bag it comes with is not the best to carry... we opted to buy a hockeybag with wheels to put everything in and haul it that way... This was worth every penny!
Bateau gonflable mariner 3
Beau bateau solide et de bonne qualité, bonne maniabilité, stable même dans les vagues sur le lac, nous sommes enchanté de ce produit!
Divertimento allo stato puro
Un canotto livello pro! Ad un mini step da un vero e proprio gommone! L'abbiamo preso per iniziare la nostra avventura come neo natanti da diporto e attrezzando pian piano con tutti i suoi accessori (tendalino, motore elettrico, scaletta) ora ne siamo super soddisfatti.Di facile assemblaggio e dotato di tutto il necessario per iniziare a divertirsi
Lancha inportante
Muy buena calidad.
Super bâteau intex
C'est un super bateau, après premier test réussi :gonflable en pas longtemps , lourd car la qualité est au rdv avc un fond rigide ou on réussi à se tenir debout sur l'eau facilement quand à la qualité du plastique du boudin elle a l'aire bien résistante avc un renforcement pour les fortement sur tous le tour ainsi que dessous et au milieu pour bien fendre la vague, merci a intex et Bolo pour une livraison dans les temp malgré la période difficile
Visit the Intex Store
BHD319877
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Or share with link
https://bolo.com/