About this item:
Full color display gives you current temperatures & humidity, with a future forecast whether it could be sunny or rainy to snowy. Features accurate, self-set atomic time & date with automatic DST updates. Records min/max values and alerts you of extreme temperatures. Also displays your heat index and dew point. Will indicate of low battery and reception strength. Batteries required (not included.).Weather Station Factory Restart Explanation: The factory restart returns the weather station and outdoor sensor to an ?out-of-the-box? default state and often resolves an issue. Factory Restart: 1. Remove all power (batteries and AC) from outdoor sensor and weather station. 2. Press one of the buttons on the weather station at least 20 times to clear all memory. 3. Verify that the weather station is blank before proceeding (there may be lines painted on the screen that will show when there is no power). 4. Leave both units without power for 15 minutes (very important). 5. Insert the AC power cord into the wall outlet then into the weather station. 6. Insert fresh batteries into the outdoor sensor. 7. Press the TX button on the outdoor sensor to transmit RF signal. 8. Keep the outdoor sensor 5-10 feet from the weather station. 9. When RF connection is established, the temperature will appear on the station. Allow the outdoor sensor and weather station to sit together for 15 minutes to establish a strong connection. 10. Do not press buttons for 15 minutes. For optimum 433MHz transmission, place the outdoor sensor no more than 300 feet (91 meters, open air) from the weather station Explanation: The factory restart returns the weather station and remote sensor to an “out-of-the-box” default state and often resolves an issue. Factory Restart: 1. Remove all power (batteries and AC) from remote sensor and weather station. 2. Press one of the buttons on the weather station at least 20 times to clear all memory. 3. Verify that the weather station is blank before proceeding (there may be lines painted on the screen that will show when there is no power). 4. Leave both units without power for 15 minutes (very important). 5. Insert the AC power cord into the wall outlet then into the weather station. 6. Insert fresh batteries into the remote sensor. 7. Press the TX button on the remote sensor to transmit RF signal. 8. Keep the remote sensor 5-10 feet from the weather station. 9. When RF connection is established, the temperature will appear on the station. Allow the remote sensor and weather station to sit together for 15 minutes to establish a strong connection. 10. Do not press buttons for 15 minutes. • For optimum 433MHz transmission, place the remote sensor no more than 330 feet (100 meters, open air) from the weather station. Note: In Mounting/Positioning Remote sensor First: Place the remote sensor in the desired shaded location and the weather station in the home. Wait approximately 1 hour before permanently mounting the remote sensor to ensure that there is proper reception. POSITION Outdoor: • Protect the remote sensor from standing rain or snow and from the overhead sun, which can cause it to read incorrectly. • Mounting under an eave or deck rail works well. • If you choose, you can construct a small roof or box for the remote sensor. Be sure a box has vents. • Mount the remote sensor on the North side where to prevent sun from causing incorrect readings. • Mount at least 6 feet in the air for a strong RF (radio frequency) signal. • Do not mount the remote sensor on a metal fence. This significantly reduces the effective range. • Remote sensors are water resistant, not waterproof
4.6 out of 5
92.73% of customers are satisfied
5.0 out of 5 stars AWESOME Weather station
This is what i want it for a long time!!!!Pros: - Very easy to read information during the day or at night - Works plugged in and also with batteries - Accurate readings most of the time - Easy to follow instructions - 2 AA batteries are required for the sensor - Very cool Animated Forecast backgroundCons: - None so farOverall we like this unit at home, we are able to see the outdoor and indoor temperatures at a glance. It helps us predict what we can expect for the day!!! I know we all have smartphones and we can get the weather updates that way buy having it hanging on your wall or just displayed on a table makes it so much easier and at the same time looks great. My 6 year learned to tell us the weather on a daily basis, great way to teach your kidsMy friend thought it was a high end weather station, i mean PRICE wise jajaaja he went ahead and purchased one after checking the price.****Quick note****I applied clear tape all around the wireless sensor that is setup outside my door just to prevent any water getting into the unit, BE CAREFUL NOT to tape the actual sensor opening i left that open for obvious reasons!!!If you liked my review please hit the "Yes" button below to help others, have any questions? you can ask me marquino17@gmail.com
5.0 out of 5 stars GREAT FOR THE PRICE!!
For about $40, its a great little unit with a nice display. I was a little reserve on ordering the product as I have read all the bad reviews. I seems to be fairly accurate, not going to say fully accurate but I have only have my phone to compare it to, and its always been within a couple degrees considering the airport to about 7 miles away which does the reporting. As far as the remote sensor, I was even more apprehensive because I wanted to use this in my shop which has steel walls and a cell phone signal even has a hard penetrating the walls. My remote sensor is about 40' away and never had a problem with it communicating with the base. I would assume the sensor is NOT fully water tight as per the instructions say to locate it where rain cannot directly get to it. I just used a zip tie under an eve of the house which seemed to work great. The atomic clock has not once lost its signal or lost time, which I've had other brands do. Some people seem to think that this has a picture on the display of the forecast, which is wrong. Its merely telling you the current barometric pressures. Sunny and flowers is high pressure, clouds and lightning is low pressure, its not a reflection of what the weather is doing outside. The display is bright, colorful, and easy to read... kind of.. I have this unit on a table and can read it fine either sitting or standing, harder to read the display from the side to side angles, or if you are down lower than the unit itself. Must be plugged in to see the display, but does have battery backup so you dont have to redo the setup. The setup itself was really easy as well. Ive had this unit for about 5 months.
4.0 out of 5 stars Works well, informative, only wish it had more brightness levels.
It's kind of a generic weather station. I have had my first one for about a year now in my RV. It works well as far as it's time and temperature readings. It' OK for weather for the next few hrs but simple generic algorithm of barometer rising or lowering. On the road and driving over 10,000' foot mountain passes, not at all accurate for the next few hours forecast. But then again, it's not designed for that. The one I just ordered for my home will be much better for it's "forecast". Only objection is it only has 3 brightness levels, high, low and off. I can live with that.
5.0 out of 5 stars Nice Looking and Useful
We have been buying this brand for years. In fact, I have one in the other room. I wanted one with color in it for the living room. You can see it across the room. I like being able to see the indoor and outdoor temperatures and also the humidity. I like that it shows the weather in a picture. It shows rain and snow and seems accurate. It is a great size for the coffee table. I did not mount it but it has a stand for setting on the table. It was easy to set up with good instructions. The Glock will set itself. I wanted an electric cord to avoid changing batteries. A bonus is that it reads the outdoor sensor that was already there. So really decorative and fun to use.
5.0 out of 5 stars Looks great and seems accurate
This is a beautiful weather monitor. It has a large colorful and bright screen that’s easy to read and looks great in our kitchen.
5.0 out of 5 stars Perfect !
Very good quality and served my purpose perfectly.
Colorful and precise time.
Very nice looking clock for my night stand. There is indeed an angle issue when not looking straight at it, but since my night stand is at eye level when sleeping, it is not an issue for me. It comes with an AC adapter, but you can run it just on batteries. However, you can only adjust brightness when plugged in with the AC adapter. I am in Airdrie, Alberta (just north of Calgary) the it picked up the atomic clock signal within 5 minutes of scanning. The time is in perfect sync with my smartphone. Speaking of smartphone, it appears to cause enough of an interference so that if the phone is nearby, the clock won't pick up the atomic clock signal. When I first turned on the unit and walked away (phone in hand), that's when the clock got auto-set. I could repeat this scenario many times to know the phone was the culprit. It's no big deal for me. I bring my phone with me to work so the clock has all day to keep the precise time.The outside temperature transmitter is precise enough, but you have to keep it in the shade. Avoid direct sunlight and keep it upright so that it doesn't rain inside. I have it hung under the patio umbrella and the signal reaches our bedroom upstairs.I haven't had it long enough to see if the weather forecast is reliable, but I have my smartphone charging by the bed so I get a better morning forecast from that anyway.
信頼できるメーカー
別モデルのLa Crosse Technologyの温湿度計を以前(5年前)より使用しており、気に入っているので追加でこのモデルを購入しました。単三電池3本でも付属のACアダプターでも電源取れます。海外製なので電波時計の受信はできませんが、たまに時刻合わせすればいいので。類似の廉価品は液晶の透けやセンサー感度がいまいちのものが多いですが、La Crosse Technologyのものは値段は少々しますが表示の美しさ、正確さ、センサーの耐久性はピカイチかと。実際、5年使用していますが、センサーが読み取れなかったことは一度もありませんし、センサーの電池は一度しか交換していません。買えばきっと満足されるのではないかと思いますよ。
Five Stars
Nice item. Always remember to send a adapter suitable for 240V else a with a converter.
Easy To Read and Understand.
I received the Weather Station in record time and in perfect condition. This is the Third LaCrosse product I have and the performances have been fully Satisfactory. This new one is easier to see than the previous one It replaced. I use it in my RV and the information they provide makes it easy to prepare for the weather conditions. The last "outdoor" sensor stopped working so I ordered a new unit. There was an advertisement for a protection device that was available separately for the out door sensor. I tried to order one but there was no stock. I think the small plastic cover should be "INCLUDED" with the product as they are subject to water entry and corrosion. I would recommend the product without hesitation but the outdoor sensor can be problematic in "damp" and Humid Conditions as delivered.Barry
Problem running the product even on a step down transformer(purchased seperately on Amazon)
Product looks and works quite okay on batteries but then then the display snoozes off after few seconds.I need to know which brand of AC adaptor should I use to convert 220V of India to 110V of US? I am unable to get the full benefit form the product or write an actual review of this weather station.Hope company replies as soon as possible and in right earnest.I finally purchased a step down transformer from 220V to 110V from Bolo only but the product still worked only on batteries.I was forced to initiate a refund request .
Visit the La Crosse Technology Store
BHD33122
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Or share with link
https://bolo.com/