Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
Review:
4.3 out of 5
86.15% of customers are satisfied
5.0 out of 5 stars 1 year edit: Saves so much money! And surprisingly, time.
Edit after about 13 months: I am finally replacing my printer cartridges as the quality of printing has gone down. The prints are getting blurry and much fainter. For an extra year of ink at less cost than replacing one cartridge, I'm exceedingly satisfied! I will be refilling the new cartridges with this ink again. A once-a-year replacement is a great trade off for me.Edit after 10 months:I'm still endlessly satisfied with this product. I have used maybe a quarter of each colored ink and less than half of the black ink. I run a small business and print daily, sometimes many pages a day. Here are some tips:1. Note which of each color goes in which hole and store that note with the refill bottles.2. Note where in the printer the color and black cartridges go. Mine are side by side and it will mess your printing up if you put them in the wrong spots.3. Run your printer's cleaning operation after you refill the ink.4. Wipe the needle down after you draw up the ink, before you put it into the cartridge (this prevents bubbles, which wastes ink).5. A paper towel with concentrated bleach toilet cleaner will remove the ink stains from hard surfaces.6. 2-in-1 shampoo/conditioner will remove ink stains from your skin. Head & Shoulders original works best.7. If your prints start looking streaky when you print a long document, print in smaller batches and let the print head "reset" (listen until it clunks) before you print the next batch. It's slower but much less frustrating and wasteful in the end. I usually print 5 pages in each batch.8. I can usually put 4ml of each color ink and about 7ml of the black into my cartridges, even though the instructions say to use less.9. I have had to to refill about every 3 months; usually the black runs out first.10. I have saved well over $100 in the past 10 months and spent less time on printer refills as well.Original Review:Being able to refill my printer cartridges myself has been SUCH a game changer. I at first thought I was going to be sacrificing speed for lower costs, which was a worthwhile tradeoff for me. However, after a few times refilling the cartridges, I've been surprised to find that it's saving me time as well. I used to run out of ink, have to go to the office supply store (because I was always printing something urgent when the ink ran out, so online ordering was going to be too slow), find the right cartridge, drive back, and install the new ink. Now, I realize a cartridge is empty, get the box of refill inks down off the shelf in my home office, take it to the bathroom or outside, refill the ink (which takes less than 5 minutes), and reinstall the cartridge, which is WAY faster. Not to mention, I'm saving at least $25 each time I refill a cartridge, and am wasting less ink because I don't need to throw out the whole color cartridge just because I ran out of cyan. It's great!The cartridges my printer uses do not have holes in them, so I used a drill bit slightly bigger than the needle included in the kit to drill a hole in each chamber, which was very easy to do. I peel the stickers off almost all the way but not quite so that when I'm done refilling, all I have to do to cover the holes back up is make sure the area around them is free from ink and stick the stickers back down. As the cartridges are facing upright in my printer the stickers work fine as a seal and I haven't had any problem with leaking or drying out.I did have to override my printer's "out of ink" error message eventually, even though I refilled the ink before the cartridges were completely empty the first time. Some quick googling for my make and model of printer told me that holding down the stop button for 5 seconds would clear the message, and it worked like a charm. Absolutely worth the small amount of hassle.
5.0 out of 5 stars Yes! Worth it! HP 902
Now that i finally figured out i was filling up through the cartridges air vent instead of punching a small hole in it and filling it up that way, the process is much easier!Dont be like me and think you can figure it out on your own so you dont have to look up youtube tutorial. Just the five min and it will be much easier in the long run.My tips for HP 902:1. Look up tutorial on youtube based on the cartridge youre filling.2. Poke a small hole in the cartridge. Mine has the area indented already so it was easy to take small screw driver and hammer and gently hammer it down. Then it was easy to insert the needle.3. Dont overfill. Im filling to the 3ml and 5ml on XL.4. Wipe down your needles after with alcohol.5. Turn off auto updates on your printer.6.Run the “clean printhead” on your printer after installing.Gotta say the printer ink biz is quite a racket. Being able to refill is a gamechanger. The ink quality is good and im very happy with this.
4.0 out of 5 stars Good. Not perfect, but good.
Worked okay on an HP 67 cartridge. I added 3mL just to give it a test run. After letting it sit for 4 hours, I printed 20 pages. As you can (sort of) see in the picture, the refill ink results in a much softer image. The color is also not as black as the original HP ink. So, I don't know. Does it work? Yes. Is it perfect? No. I don't think the viscosity is correct as it's clearly spreading more than the original ink. And the color is certainly off.Since I'm just printing text with the printer at work, I will continue to use the Aomya ink as it is so much more affordable.It depends on what you need it for. If you're printing pictures or need the highest quality, don't bother. Save up for one of the many tank-style printers that are now available, use the OEM refills as they're inexpensive, and take your cartridge inkjet printer to the recycling center. If you're just printing documents like I am, it's fine. Just be aware when you're filling the cartridge, ink will run freely out the jets in the bottom of the cartridge. I did not expect that, thankfully I had a prepared surface down and gloves.Also, if you have access to any sort of plastic sticker, I highly recommend removing the original label on the cartridge, sticking it to a new one, then cutting out the exact size as the original one. You can see the small channels that need to be exposed on the cartridge so the thing can breathe, alignment is easy, but important.All in all? Not bad. Far easier than many make it out to be. You're just putting ink onto a sponge. That's really it. And while the print quality isn't quite as crisp as OEM, this kit will fill up these tiny ink cartridges umpteen times. Printing on this inkjet has become almost free.
5.0 out of 5 stars Seems to be good clear ink!
Works great!
1.0 out of 5 stars Horrible product
I literally received this order today opened the box and ink was everywhere!!! The bottles were used and the syringes were used as well! The gloves included were used and full of ink!!! I’ve ordered so much from Bolo but this was the first time I got a package in this manner! I was in total shock. 😮 total disappointment from this company. I guess I’ll buy the expensive HP cartridges!!!! You get what you pay for I guess! 😢😖😡😩😤
3.0 out of 5 stars Product is decent for price
Even after completing filling it’ll dry up the cartridge pretty quick but still good for the price.Whole bottle printed hardly 80 pages and ink quality was also not great.
5.0 out of 5 stars It is ink
What more can you expect
5.0 out of 5 stars Works 4ml of each
Depends on your cartiage size but 4ml worked for my xl carriages I have 67 and if you over fill it'll come out super blue for the first few prints.
Perfect
My first time refilling printer ink. It was easy, followed tutorials online. This kit came with everything I needed. After letting the cartridge sit for a day in my printer, the test sheets came out perfectly. All colours are vibrant and correct. I don’t print photos, only simple projects on regular paper or card stock. Made party invites and they were perfect.
Prodotto eccellente.
Alta qualità.
للاسف ماناسبني
للاسف ماناسب الطابعة حقتي hp 652 الافضل قبل تشتري اي لون تاكد يتناسب مع طابعتك تاكدي من رقمها وشوفي يناسب الطابعة او لا
Conforme à la description
Des flacons de bonne taille, à un prix très raisonnable, je verrai la qualité plus tard...
Perfecto
bueno muy Producto
Visit the Aomya Store
Aomya Ink Refill Kit 100ml for HP 67 61 65 60 62 63 910 920 901 902 932 933 934 940 952 94 95 96 Inkjet Printer Cartridges Refillable Ink Cartridges CIS CISS System 4 Color Set with 4 Syringes
BHD7908
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
Similar suggestions by Bolo
More from this brand
Similar items from “Inkjet Ink Refills & Kits”
Share with
X
Or share with link
https://bolo.com/