Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
NIBBI PE Carburetor is refined to perfection and has set the standard among scooter and motocross racing carburetors.
Package Included:
1x Carburetor
1x Slow Jet
3x Main Jet
Review:
4.4 out of 5
87.50% of customers are satisfied
5.0 out of 5 stars Nice piece of equipment
I restored an old dirt buggy with a 150cc engine and got tired of messing with the cheap vacuum-driven carb. Decided to put a "real" carb on it. Did some research and determined that I should use the smaller-sized carb. People seem to think a larger carb is always better, but I think a larger carb only helps with top end speed. Using a smaller carb will give more low-end power, which is what this buggy needed. So I went with the same size it came with - 24mm. I also bough the NIbbi intake manifold and filter. However, the intake opening on this carb is like 48mm and the filter is also 48mm (I think, could be off a little on either) which meant the filter did not fit on the carb. Nibbi didn't seem to make a filter that fits this carb exactly. Plus, there wasn't a lot of room behind the carb once I put it on. I had to run a piece of tubing from the carb intake around the frame and then mount the filter to the tube. Not sure if that impacts performance or not.This carb comes with a couple of different idle and main jets. Using the pre-installed jets, if I gunned the throttle the engine bogged to a stop. I let it do that and took the spark plug off after it died and the plug was wet so I put a smaller main jet in. It seemed to get slightly better but still dies when I gun it. I still need to do some tuning.Anyway, I am very impressed with the build quality of this carb. It's very well made. I think I'll get one for my scooter as well. I just don't trust the electric chokes and vacuum slides on the Chinese carbs. Would rather have a mechanical choke and a real slide.
5.0 out of 5 stars Good carb, but takes time to tune
I bought this for a built 50cc 2-Stroke engine. Nibbi makes a good solid carb, inside the chamber is polished, chrome plated, and looks nice. My only gripe is that it is a pain to get tuned. The needle has a different taper than my usual Keihn/Mikuni PE, but getting this thing dialed in just right took time and patience. Outside of that, it’s a great carb and has performed well. Worth the cheaper cost to have to fiddle with jets.
5.0 out of 5 stars Very satisfied
If you wanna tune in your gy6 139qmb after a big bore kit(mine was to 72cc) this with the nibbi intake is the way to go. Worth every penny. Had to swap around jets but they included them with the carb and iv gained a lot of power. Starts super easy and is still amazing on fuel. Iv put well over 1000 miles so far on it
5.0 out of 5 stars Adds plenty of power
Purchased this for my sons Honda CRF80 F to replace the stock carburetor that had finally had enough after almost 20 years. I bought this bigger one because well why not? It took ordering a small piece of radiator/ turbo hose to properly fit to the intake manifold and a new air filter to fit but overall was easy to install and I didn’t even have to change the jets. Just adjusted the idle. It definitely added power! I’m 6’5” and 230lbs, with the stock carb the bike would move me around ok but nothing special. With this new carb it lifts the front tire when shifting to second. Definitely impressed me and would highly recommend
1.0 out of 5 stars Measure the diameter of your intake, boot fittings on both sides
Did not fit, including the stock throttle cable did not love slide to move all the way it would require adapters and while it’s a nice machined well-built piece, it does not fit my 2001 TTR 125
5.0 out of 5 stars Great quality product for the price
Had to do some slight modifications but it fit my tao tao atm50 149qmb gy6 perfect,I have a big bore on it and made it run great,just have to do slight tuning,everything I wanted
5.0 out of 5 stars Exquisite quality ! (Full disassemble review video)
The media could not be loaded. Jets for this carb $11.99 - (Bolo ASIN#) just search " B07PQ6K84T " in BoloIm very picky about the quality of anything I buy This carb is hands down the most defect free carb I've ever seen it's all clean. No burrs or anything. Highly recommend ! Exquisite quality for the price!
4.0 out of 5 stars Excellent quality construction, easy access tuning
Positives ~ The construction is on point. ~ Quality materials & clean machining of its parts.~ Relatively easy to install. Depends on the workspace (lots of room to work, or right quarters?).~ tuning - access to jets & adjustment screws are easy (positive) makes "tuning on the fly" easier.~ Great value for the money!Negatives ~ sometimes not all the correct parts are included - incorrectly sized intake boots, incorrectly sized o-rings in the throttle cap & fuel drain bowl - clogged or undrilled jets. This is really dependent on who originally put your package together at the factory...~ tuning necessity - sometimes it takes swapping different size jets to tune the carb to elevation, air temperature, fuel flow - but this is always dependent on engine size & compatibility! Sometimes this is the necessary evil of matching a carb to your motor.Some are lucky to "plug 'n play." Others are unlucky to have to spend hours rejetting & trial-and-error getting it to tune correctly.
Visit the nibbi Store
NIBBI Racing Performance Motorcycle Carburetor 24mm 100CC 125CC Carburetor PE24mm With Carburetor Jets Fit YAMAHA KAWASAKI SUZUKI Apollo Dirt Bike Mini Bike SSR TTR KYMCO SYM TAOTAO GY6 Scooter Moped
BHD39116
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
Similar suggestions by Bolo
More from this brand
Similar items from “Carburetors”
Share with
X
Or share with link
https://bolo.com/