Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
This version of the Nerf Modulus Longstrike CS-6 toy blaster comes with Nerf accessories so you can create different blaster styles! Attach the barrel extension for distance targeting, use the bipod to stabilize the blaster, and add the Nerf scope for aiming. The accessories are easy to attach and remove, allowing you to customize the foam blaster every time you blast into Nerf battle. These bolt-action toy blasters come with 3 clips, which each have 6-dart capacity, and 18 Nerf Elite darts. You can store 2 of the clips in the shoulder stock, keeping them nearby for fast reloads. To play, load a clip into the Nerf blaster, slide the bolt to prime, and pull the trigger to unleash a dart. Kids toys like Nerf Modulus toy foam blasters are great gifts for 8 year old boys and girls who enjoy active play. Each sold separately, subject to availability. Eyewear recommended (not included). Nerf and all related properties are trademarks of Hasbro.
Review:
5.0 out of 5
100.00% of customers are satisfied
5.0 out of 5 stars The Longstrike We Deserved
The Longstrike. A fan favorite based on looks, but an average performer...but that all changes today! The Modulus version releases the Longstrike CS-6 with a few new updates, and most importantly, improved performance!Let's get this out of the way. This is an updated version of a Nerf Blaster that is nearly a decade old. That said, it feels just as it did way back then and comes with some accessories that bring out that sniper look! When you get everything out of the box, the bolt and stock are detached. The stock, once inserted, cannot be removed! You would have to take apart the entire blaster to remove it, so keep that in mind. Otherwise, the stock is the same as the old one, providing magazine storage for 2 extra magazines (Clips if you prefer the Nerf term). However, the included magazines do not click into place, and simply friction fit. It is meant for the older 6 dart box-style magazines. The other thing is the bolt is now threaded, meaning it's easy to remove for storage or when you need to take apart the blaster, you just unscrew it instead of trying to pop an end off. Major improvement but the bolt doesn't fit flush with the blaster, leaving a little wiggle room, but has no impact on performance.The Magazines are the ones from the Raptorstrike, half white and half clear, with a upward slant. It holds only 6 darts, which is pretty much required for any "sniper-esque" rifle. Moving on to the scope, it's the same scope from the Long Distance Modulus kit. The old Longstrike came with a flip up sight, which is available through the Ultimate Customizer Pack in the proper modulus colors, though for a hefty price. The Bi-pod is also from the Raptorstrike, providing 3 levels of height adjustments. You can use the button on the back to extend the bi-pod legs as you see fit. The front end barrel is about as long as the old one, only in the spiffy Modulus line colors. As usual, the inner diameter of the barrel is wider than the diameter of the blaster, which, in theory, reduces the barrel drag.Now comes the important stuff, the Main Blaster body. It is virtually identical at a glance. However it is slightly longer due to additional reinforcement at a sling point where a screw as been added. On the old one, it is not present. There's also further adjustments such as the back end where the priming indicator is located. On the old one, it is a slit. On the one, it is a hole. The new Modulus Longstrike is now Direct Plunger, meaning it shoots harder and faster. It now has Elite performance (70 FPS average) and out of the box, works amazing. There is also 2 notches that must be depressed to unprime, which is actually quite difficult to depress and reprime. Once either one is depressed all the way down with toothpicks or something narrow, Pull the priming bolt back all the way and pull forward. The last updated change is the locking mechanism for the accessories, which is now the newer style ramps instead of a spring loaded notch.Overall opinions? It's pricey but makes for a good holiday gift or maybe an item to treat yourself with. It's a great throwback and being updated for Elite performance means we truly have the sniper rifle we wanted all those years ago, without the hassle of modding.
5.0 out of 5 stars Averages 74 FPS, stock; a comprehensive review, detailed analysis, and opinion.
My ProChrono Digital chronograph measured the speed of the darts fired by this stock Modulus LongStrike blaster at an average of 74 feet per second (FPS) using Nerf Elite darts (it is capable of shooting any standard Nerf Elite darts; blue, green, white, orange, purple/grey, Starwars themed, Accustrike, and decorated Rebelle darts). The standard average velocity of a Nerf Elite blaster is 70 FPS, so that makes the new LongStrike an overachiever. Having always been in the shadow of the Nerf LongShot in terms of performance (and ease of modification), the original LongStrike was always dismissed as grossly underpowered and it’s use of a reverse-plunger system was something the Nerfing community had come to despise. This was a travesty because the LongStrike had an attractive shell design that many consider to be the nicest sniper-type blaster of all time, myself included. With this new LongStrike, the Nerf engineers needed to upgrade the platform to a direct plunger system (which is what all the other Nerf Elite “springer” blasters currently use), yet keep the same shell proportions of the old LongStrike. The very first thing I noticed about the Modulus LongStrike during assembly was the orange bolt action priming bar was improved. The orange cone-shaped handles were the same, but the bar was threaded on one end, making it able to be screwed on and off at will. All previous bolt-action handles were not meant to be removable once clicked into place. This move is a first for Nerf and a move I hope will be continued in the future, especially since they installed an irritatingly loud ratcheting noise that made the Nerf Mediator an obnoxious blaster to prime. There are 5 loud clicks in quick succession to report that the blaster is being primed, and more importantly, preventing the user from double-priming and thereby avoiding a jam. While I feel that this is an unnecessary precaution, perhaps the Nerf engineers had a good reason for fool-proofing it while at the same time making it the loud (I am sure there is a way to achieve the same end in a quieter manner, but I concede that I am no engineer). The main blaster body has upgraded tactical rail divots (they are larger and do not employ the use of springs) over the old LongStrike. There are 2 top tactical rails on the main blaster: 1 above the front barrel, and 1 closer to the tiny Orange rear iron-sight aperture that protrudes out from the blaster shell. Below that iron sight is a hole that functions as a priming indicator that shows Orange when the blaster is ready to be fired. I find the ergonomics of the steeply slanted pistol grip to be comfortable. The ambidextrous magazine releases located in front of the main trigger on both sides are much appreciated, especially for those who don’t have long enough fingers to jettison their mag in one go (and needing a visual to locate the lever in order to change their magazine). On the left side of the blaster there are 2 new lock-release buttons above and below the priming handle that seem to be activated with a pen tip. These are very useful just in case one of the internal locks seize up, saving you the time and trouble of having to open up the blaster to fix it (or having to throw it away). After having tested out the Modulus LongStrike, I am happy to report that *I have had zero jams or smashed darts; I did not need to open the Modulus LongStrike’s black jam-access door even once, but it is there if in event there is one at some point in the future. This was a chronic issue with the old LongStrike, but I believe that this time the Nerf engineers have succeeded in properly resurrecting the LongStrike where the Nerf Tri-Strike had failed. I was wondering if the LongStrike would be using the finicky Tri-Strike’s internals but it appears that the Modulus version of the LongStrike has it’s own. The reason I believe this is because it does not have slam-fire. Allow me to explain: the slam-fire function is the ability to hold down the trigger and shoot a dart off every time the blaster is primed, typically sacrificing accuracy for a higher rate of fire or Darts Per Second (DPS). The Tri-Strike has this function, but being a sniper rifle type blaster, a sniper operator should know that he or she has no business sacrificing accuracy for anything. So I have therefore concluded that both of their internals cannot share the exact same parts. That makes the Accustrike RaptorStrike the currently closest brethren that the Modulus LongStrike has, but with a 64 FPS average, it is not as strong as the Modulus LongStrike. To the average Nerfer, power is thought to be the most important factor when choosing a blaster, but I would argue that it is actually the “effective range” of the blaster that should determine it’s true usefulness. To be able to consistently place a tight grouping of darts within a reasonable distance from your target is the best blaster in my opinion. Truth be told, it is in the ammunition that brings about the biggest difference in accuracy for Nerf blasters: the Accustrike, Accu-fakes, or Waffle-tip Darts (this is a side note, but I am the one who nicknamed the Waffle tip darts, true story) are known to be the most accurate of darts, but they are sold separately. Not to be discouraged with the Nerf Elite darts that come with the Modulus LongStrike though, you do get 18 of them with 3x 6-dart RaptorStrike magazines. These low-capacity magazines also match with the sniper genre and fit in the dual magazine holders neatly incorporated into the fixed shoulder stock of the LongStrike. Unfortunately, this part looks like a direct mould of the original LongStrike so while the interior of the mag holder’s well is built to hold the original 6-dart mags, it will not hold any mags of larger capacities. The RaptorStrike’s angled base 6-dart mags do fit in the mag holders, perhaps not the way they were intended to, but they do stay in place nicely. Higher capacity Nerf mags and drums will definitely work normally in the LongStrike, which is the main thing. Unlike the upgraded removable priming handle, the shoulder stock will stay attached and cannot be removed; it is a stand-alone model and was never intended to be removable, although if you open up the blaster... on second thought I do not recommend that you do (I still have flashbacks of frustration from bad experiences with modifying the original LongStrike using overpriced Orange Mod Works kits that broke within a week). Anyway, there are 3 points to attach a sling mount on this blaster, 2 of them are on the shoulder stock: 1 on the upper rear corner and 1 underneath the shoulder stock, and 1 more under the muzzle. The only returning attachment from the original LongStrike is the long barrel attachment, but it had to return because it adds a lot to the look and appeal of a sniper rifle; it is almost a direct reprint of the LongStrike’s long front barrel. This barrel was ahead of it’s time in that the width of the tube in the barrel was much wider in diameter than that of other Nerf barrel tubes. This wider diameter decreases the chance of a dart touching the sides of the tube while it travels through the barrel, thereby preserving most of it’s kinetic energy, but this phenomenon of “barrel-drag” still resulted in slightly shorter dart ranges. While doing my testing, I was still able to discern a drop in muzzle velocity from the 74 FPS average without the front barrel attached, to a 68 FPS average with the barrel attached (it should be noted that the length of the barrel attachment forced me to keep about a foot further back from the chronograph for that part of the test). Obviously during play, most people will not notice this difference, so I still think that using the barrel should be perfectly okay. This front barrel attachment retained the same proportions and flip-up sight as the original, but there are 2 detectable upgrades to it: the inner tube is set further inward to be more compatible with some of the newer Nerf blaster barrel attachment points, and the tactical rail divots on the top and bottom rails have been upgraded and slightly enlarged just like the main blaster’s new tactical rail divots (they are longer and no longer utilize springs). There is yet another attachment that the LongStrike borrows from the RaptorStrike, which is a bipod that has 3 adjustable lengths, and is foldable for easier transportation purposes, mimicking the same accessory of the same name frequently used to ensure the steady aim of something. Lastly there is the scope attachment, which is a green reprint of the Modulus Long Range Kit’s optic. The scope has no magnification (or even a lens), it has only a crosshairs aperture; putting magnification on a toy that uses inaccurate ammunition must seem like a waste to Hasbro. I suppose this is also okay since the purpose of a Nerf scope is only to fulfill an aesthetic. The original LongStrike attachment was a flip-up iron-sight/ leaf-sight that matched the leaf-sights found on projectile launchers in real world applications, and it did not look nice on a sniper rifle (which is why the leaf-sight attachment reprint is currently sold with the Walmart Exclusive Ultimate Customization Pack’s Modulus Demolisher). I therefore approve of the decision to replace it with this green scope. In conclusion, the Modulus series has brought back old blasters before. Following in the footsteps of the Modulus Stryfe, the Modulus LongStrike returns with a renewed vigor and blesses the Nerf Sniper enthusiasts with an aesthetic look and a performance worthy of the Nerf Elite nameplate. Let us be thankful to Hasbro and Nerf as this decision allows for better pretending and brings better play to the world of pretend play.*Update (12-18-18). I was able to field test the Modulus Longstrike and had 2 jams on Accu-fake/ Accustrike darts. Both times were with the barrel on, but both times the dart tip was pointing backwards as the dart was folded in half within the barrel and had to be pushed out with a ramrod. This was understandable since the darts used for the field test were older, worn, and unofficial brand name darts. Still, it was able to perform well on most of these darts throughout the run of the event and I still have full confidence in it. I will return to update this review again if anything else comes up.
5.0 out of 5 stars Great nerf gun
I loved everything about this nerf gun
Enormous, and lots of fun!
This blaster, with everything attached, is by far the biggest in my collection. It's glorious!The performance is about on part with what I expect from NERF Elite blasters. In a battle it won't be super competitive, as it has a six round capacity. However, you can always add a larger magazine to it, and having the two extra magazines in storage helps a lot.In terms of emotional response, this blaster is unparalleled. It's so much fun, and probably the coolest NERF brand sniper on the market.My only complaint is that the scope doesn't sit well on the rail. To fully lock it in place, the rear of the scope collides with the rear iron sights. While it can be properly seated on the tactical rail, it will be hard to remove, and may cause damage to the iron sights or scope over time.
Buena compra
Corresponde a lo que se solicito, gracias.
Ein muss in der Sammlung
Neutrale Verpackung, gut verpackt, funktioniert perfekt.
Nice nerf Sniper to add onto collection
Great sniper to have and came early in good packaging too
Nerf long strike
I really like it because it was a great purchase and it was half off due to Black Friday sales and i didn’t even have that one in the past before but now I do thanks for the purchase and I forgive you for reminding me about the delay
Visit the Nerf Store
NERF Longstrike Modulus Toy Blaster with Barrel Extension, Bipod, Scopes, 18 Elite Darts & 3 Six-Clips (Amazon Exclusive)
BHD50179
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
Similar suggestions by Bolo
More from this brand
Similar items from “Foam Blaster Sets”
Share with
X
Or share with link
https://bolo.com/