About this item:
4.8 out of 5
95.56% of customers are satisfied
5.0 out of 5 stars Conceal and Organize with Ease!
As a cable clutter warrior, I recently got my hands on the this product. Let’s dive into the details of this cable management wizardry!What’s in the Kit?• Spaghetti Lifting Magic: Okay, not really, but close! This cord cover wall kit conceals up to 306 inches of unruly wires and cables.• Paintable Wonder: Made from sturdy polyvinyl chloride (PVC), it’s ready for your artistic touch. Paint it to match your wall seamlessly. Mine had no issues with white and black paint.• Easy Installation: Choose your weapon—tape or drywall anchors and screws. In just 15 minutes, transform your living room from chaos to zen and eliminate wife complaints about cable messes!• Safety First: Beyond aesthetics, this cable raceway ensures safety. No more tripping hazards or curious pets nibbling on loose cords.Why I Love It:1. Customizable Chic: Paint it white, black, or unicorn rainbow—it’s your canvas!2. DIY Delight: Cut it down to the desired length. No cable is too long for this superhero.3. Sturdy Locking System: The unique connector kit keeps everything snug. No cable escapes!
5.0 out of 5 stars Straight forward, works well with screws, looks OK
Having used an adhesive attached raceway in the past and tearing off the drywall when trying to remove it later, I chose to use the screws that came with it instead of the adhesive backing. I did not use the dry wall plugs, just screwed directly to the drywall because in my application there will be very little load on it. Note that the screws are low quality - when one screw went into a stud it sheared the head off with me just using a hand held screwdriver (i.e., I wasn't driving it in with a power tool). Otherwise screws are fine for drywall and drywall plugs. The connectors worked fine - they snap on last, over the raceway covers. Whole thing worked AOK. Note: I tried shortening one piece by cutting it with a serrated knife but that split the plastic. Their instructions recommend a hack saw and they were right - the hack saw worked much better on my second cut. All in all, it worked well and I’ll recommend it as a raceway.Notes: kit came with 36 drywall screws & plugs, which is enough if you want to attach each 17” piece with 2 screws (which is what I did).
5.0 out of 5 stars Great item
Great cord management product. Lots of good pieces, corners couplers etc. Great color too
4.0 out of 5 stars Works well, professional looking
A little harder to install than it looks, Gravity not kind, But they Included screws !! Power drill to the rescue. The overhead ones I had to screw in, quite easily, down and up , just used the adhesive, Just TAKE THIER advice and let sit for 24 hours before adding cable to it, I RECOMMEND this productWorks good and have gotten compliments on how it looks in our apartment and the job (he he) I did.
5.0 out of 5 stars Looks good and does the job well
I currently live in a rental (townhome) and needed a way to run an ethernet cable up to my room without it looking absolutely terrible. We just upgraded to gigabit internet and the wifi was only giving me a fraction of the available bandwidth. Plus, I wanted a hard wired ethernet connection for my PC and Xbox. I originally just ran the cable using those plastic clips you nail in. It looked pretty bad. So after a little research I settled on this cable management trim. Here's why this stuff is great.1) It comes in 4 colors (black, grey, white and beige) so you can usually make it look good without having to paint this trim/cord cover.2) Not everyone can run cables through either their walls or basement, or rather it can be a real pain (especially for two story homes or ranch style homes with a finished basement/drywall on the basement ceiling). Also, this is a great option if you are living in a rental and need the ability to quickly revert the dwelling back to the way it was before moving out.3) If you use clips to run a cable then A) the cable is exposed, B) you have to keep tension on the cable, otherwise it looks really bad not being straight and being slightly curled. This trim solves that issue because you don't have to worry about having tension on the cable. Plus, it looks really unprofessional doing it with clips unless you are running the cable in an unfinished basement or something of the sort.4) This stuff has the adhesive tape already applied which makes installation go much faster than with the ones that require you to cut the tape to size and apply it yourself. Plus, this stuff sticks REALLY well. It sticks so well that I hope it doesn't cause damage when removing it. It probably won't, but I'll find out when I move out...5) You can either slide the top part of the trim on or just bend the base part a little inward once it's adhered to the wall and push it on. This is great because when you get close to corners it's much easier to attach the base part first, then put the top cover part of the trim on vs. having to slide it on.My only gripe is that there are no 45 degree couplings. They have every possible coupling except that one. It would have been nice because as part of my run I ran some trim up my staircase near the trim at a 45 degree angle. I don't have a coupling at the bottom and top part of that run because of this. It would look a little nicer/more professional if they included this type of coupling!I am very happy with the result. If I ever need to run cables and can't do it through the walls or basement, this is the way I'm gonna do it from now on.
5.0 out of 5 stars Amazing results.
I am not a cable management type of person. I generally do not care for messy cables. However, I do get sick of my roomba getting stuck on my wires. I had to stop turning it on. I finally decided to find a solution that could cover the wires. There are many options out there for different prices. I decided on this specific one for a few reasons. One was that it had over 300 inches that I needed. The second one was I got same day delivery. I got the results from the picture in just 30 minutes of work. They are super easy to work with. I was worried about having to cut the pieces because my sawzall is 2 hours away. You can cut these with a BOX CUTTER, but be careful when you do. I used the couplers to make sure every piece was the same height and leveled to the baseboards. I have never been more happy with the results. My intention was not to make it look this nice. My intention was just to keep the cables off the ground. Now I plan on ordering more to hide cables in other places where I think it would look nicer. Just look at the pictures for the results.
Recibí lo que pedi
Es fácil de instalar y tiene buen acabado
As easy as ABC!
I wasn't looking forward to doing this because I'm a huge noob when it comes to home improvement stuff. I don't own a saw, don't own a drill, etc. When I came across this and how it was all-in-one, I was instantly sold. Some reviews about the difficult installation did make me worried.Yesterday I finally had some time to attempt installing this, and it went better than I had hoped!Some tips that worked out well for me:- Use tape to construct the entire layout, with the wires inside. This forces you to work out all the nitty gritty stuff before committing, and it provides you with the alternative of reworking it.- When cutting with the saw, just mark with a sharpie and use the provided saw. I used the box as a cutting board actually, and it worked great. (Told you I literally have no tools at my disposal). Yeah edges look a little jagged, but it's fine since it's covered by the connecting joints.- When you're happy with the layout, don't take all of it down. Slowly remove section by section (the rest should still be held in place with tape). When you remove that section, remove adhesive and press down. I actually reapplied the tape to hold it back it place, hoping that it would help with the adhesive bonding.- Important: Remember to account for the connecting joints when you tape it down! The joints are another millimetres or two, so if you taped down that section without that, you'd most likely not be able to fit it in.That's it! Mine's still held up with tape, so I can't attest to the strength of the adhesive yet. Will update again if the adhesive comes off the wall.
Works Well and Easy Installatoin
I was afraid that it would not reliably stick to the wall like my previous DIY trunks. But they are working well so far!
Visit the EVEO Store
BHD17794
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Or share with link
https://bolo.com/