About this item:
4.6 out of 5
92.31% of customers are satisfied
5.0 out of 5 stars Why didn’t I buy this ten years ago?!?!
Have you ever pulled a muscle twisting around under the sink to remove the detergent bottle? Spent forever trying to poor it in from above without spilling (nope, not happening). And repeat again and again and again? This thing is magic. Simple to install, the nozzle is long (so you actually get it in the dish) and the tube will let you put a mega size bottle right at the door. I doubt we’ll have to switch the bottle more than once a year, but when we do, it’s a simple unplug, remove cap, replug, prime the pump. Wish I’d bought this long ago!
5.0 out of 5 stars Work amazing!
So easy to setup and works amazing! I use it for hand soap, it's going to take a while to run out. They have different sizes so it works for most any bottle. If you are considering I would buy it now.
5.0 out of 5 stars Worth every penny
This was hands down super easy to install, clear direction, multiple adapters and ample tubing. Packaging was great quality. Was surprised.
4.0 out of 5 stars Pump Directly from the Soap Container
Works well. Instructions for install was clear and concise. Hose will need to be trimmed for length.
5.0 out of 5 stars Works great with the soap jug in the basement.
I added several feet of tubing so I could put the jug in the basement. I used a 60ml oral syringe that I got from our vet to prime the pump. Let's face it, it would have taken forever to prime it with just the soap pump. The backflow device is a must-have. The syringe pulls hard as it is drawing the soap up the tube and I held it for a while to let the soap flow. Then disconnected the syringe, and reset it to pull again. The line was long and it took several pulls to get the soap up to the end of the tube. Once there, the dispenser easily pumps the soap as expected. I'm thinking about changing the one in the kitchen, putting a "T" in the line, and feeding that dispenser from the same bottle. The tubing is 5/16" ID and 7/16" OD.
5.0 out of 5 stars Simple, cheap, works
Simple, cheap and works. Comes with a few adapters to fit different bottle mouths which is nice.
1.0 out of 5 stars Great Concept, Lousey Design
This device really sounded good, but operationally, it is greatly lacking and difficult to use.The problem is that the tapered cork that has to fit into the many different sizes of soap bottles, so they give you several to choose from, but at best, it is still problematic. When you are setting it up for the first time and each time you need to replace the bottle of soap, the bottle itself must be cleaned to insure that there is no soap on the inside neck of the bottle or the tapered cork will pop right back out. When you insert the tube into the bottle, if the tube from your prior soap bottle touches the inside neck of the bottle and gets any liquid soap on the bottle, you will have trouble keeping the cork in. Most likely the bottle has a residue of soap on the neck of the bottle from the bottle being tipped over in your shopping cart or grocery bag on the way home, and unless you clean it off so that it is not slippery with soap, the cork will not stay in, it will pop right back out.Save yourself frustrations and don't buy this lousy device as the concept sounds good but you will regret the effort that you will have to expend every time the bottle has to be changed.If you get the cork to stay inserted in the bottle of soap, you will then have to pump the dispenser some 60+ times to get the soap to refill the tubing, and you will wonder if it is even working because it take so many pumps with seemingly nothing happening. If you finally reach this stage, it will work well until the bottle is empty and you have to start the whole process all over again.What I finally dis was to take a long twisty tie wire (very long, or perhaps two or three tied together to make it long enough) like at times come on a bread bag and tightly secure it around the neck of the bottle in the threaded area so that it can't gravitate upward and take the remaining length and angle it up to the top of the cork and tightly wrap it around the cork and twist the ends together to secure it. This should hold the cork in place. After replacing the soap bottle many times I finally tried this method of holding the cork in the bottle. It probably would work to keep the cork in place even without cleaning the inside of the bottle neck from the soap that lubricates the internal edge of the bottle neck. I should have tried this the second time I switched soap bottles!
5.0 out of 5 stars Excellent for Dove hand soap
I use Dove soap in my kitchen soap pump dispenser for my hands. I got frustrated and tired of refilling the little bottle that came with my sink. I was afraid that the Dove soap would be too thick for this soap dispenser but it wasn't. It was easy to change out too. I got the biggest liquid Dove bottle I could buy and am glad it will be easier to change when it's empty. I recommend.
Built in Soap Dispenser
This product has been excellent! The installation process was smooth, and it has performed flawlessly so far.
Súper recomendable
Me encantó el diseño y su practicidad
10/10
Great product - love it.
Works good and comes with 3 different size attachments for soap
Works good and comes with 3 different size attachments for soap, we put in large Costco Dish soap container..
Funcional
Todo bien. Es fácil de instalar y práctico.
Visit the OHiHi Store
BHD15830
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Or share with link
https://bolo.com/