About this item:
Gorilla Waterproof Patch & Seal Liquid is a flexible, rubberized coating that seals out water, air and moisture. Before applying, stir contents for 30 seconds until it is thoroughly mixed. It can be applied by brush, roll, trowel, dip or pouring. Ensure the surface is completely covered. Once applied, the self leveling formula smoothly covers small gaps and cracks ensuring a watertight seal. When dried, Gorilla Waterproof Patch & Seal Liquid is paintable and temperature/UV resistant resulting in lasting repairs! Not for continuous submersion or below-waterline use.
GREAT FOR: Metal, Concrete, Wood, Aluminum, Brick, Tile, Fabric, Rubber**, Glass and More!
*For exterior use only. Not intended for inside of firebox or chimney stack.
**May not work for all types of plastics and rubbers
DIRECTIONS: 1) Clean surface of dirt, dust, grease and oil. Make sure surface is dried completely. 2) Stir contents for 30 seconds until it is thoroughly mixed. 3) Apply to surface by brush, roll, trowel, dip or pour. Ensure surface is completely covered. 4) Apply multiple coats to ensure all cracks and holes have been filled. Allow to cure in between coats and before water exposure. Full cure at 24-48 hours.
NOTE: Test finished project with light water exposure to ensure all cracks have been filled. If test fails, apply additional coats. Do not use for gaps larger than 1/4". Apply between 50F and 120F
CLEAN UP: Wipe up any unwanted material with a dry cloth or paper towel immediately. Use mineral spirits to clean applicators such as brushes and rollers.
STORAGE: Remove excess product from top of can with a dry cloth. Press or lightly tap lid shut to create tight seal.
PAINTING: Works with both latex and oil based paints. When coating with oil based paints, use a primer first before painting
4.5 out of 5
89.23% of customers are satisfied
5.0 out of 5 stars Great product
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } Very good rubber coating, great value, used on underside of enclosed trailer, very good adhesion from rolling on, very thick after 2 coats
5.0 out of 5 stars Works great
Used yesterday on a corrugated roof! went on easy will have to wait for first rain but applied easily and seamed to solidify nicely.
4.0 out of 5 stars Works great but does yellow quite a bit.
Love the easy application. this worked great at keeping out moisture that was coming in through our exterior wall that is also a SEA WALL!. Don't ask... building codes in the middle of the pacific, not so much! We needed to keep water from intruding and the walls we treated with this product have faired very well. It has made a huge difference for us. our place always felt so wet and sticky and this has helped keep the moisture out.
5.0 out of 5 stars Good stuff. Do NOT buy the spray on patch
Using this to patch a leak in a very old concrete fountain.Goes on clear. Dries shiny. Instructions say to mix but is it clear with no solids, so hard to tell when it is “mixed”. Goes on like paint but much thicker fluid. Be prepared to throw away your paintbrush after using - no way to clean it.Thick enough to adhere to the underside of a fountain with no dripping. Keep away from any water while curing. Dries to touch in about eight hours - even if coat is very thick.
5.0 out of 5 stars Fast seal, clear finish!
This is definitely a great product for weatherproofing and sealing almost any surface! Ready to use right off the can: just pour or apply with a brush and it dries into a clear hard (a little rubbery) finish in about one hour. It can even be applied in moist surfaces as it displaces water drops while being applied. However dry clean surfaces have a better finish result.The downside is that the contents start to solidify as soon as it comes in contact with air. Meaning, once you open that can some of the product will turn into a trasnparent gel. This will result in some product loss even if you try to seal tightly.Overall, I highly recommend this for quick, easy and effective waterproofing.
3.0 out of 5 stars Doesn't work all the great, poorly made can it comes in
Very thin stuff, kinda whimper. Maybe it works for some applications, im not sure. Doesn't seem to really adhere all that well...but I just used it on some pvc pipes. Can had a large dent in it and the can appears to be made out of very cheap metal so if you attempt to put lid on to keep fresh , it just even stand up to some normal taps with hammer to reseal lid , like what's everyone does with a paint can.
5.0 out of 5 stars Very Easy to apply and effective.
Had a small leak at the edge of my roof.. Didn't want to use the thick black tar sealant Because it's the front of my house and I didn't want it that visible..Tried the Crystal Clear Gorilla Sealant and it was absolutely perfect.It was thin enough that after leaving unopened in the sun for the afternoon it poured easily out if the can - so all I had to do was spread it with a wide paint brush.. I repeated this over 2 days till the can was empty.It hardened after about 30 hrs & not 1 drop of water had gotten through it..It is somewhat visible from the road, but it just looks like a damp spot on that edge of the roof.Couldn't be happier..👍
1.0 out of 5 stars Always dented
I am not sure why. Each time I order paint or glue in a can from Bolo, it is always dented. Gorilla sealer is a very thick liquid. It dries up fast once you open the can. Because the can was dented, I couldn't close the can tightly enough. The whole can dried up in a week. Now I go to Walmart to look for the sealer as I don't want anything dented.
muy bueno
(function() { P.when('cr-A', 'ready').execute(function(A) { if(typeof A.toggleExpanderAriaLabel === 'function') { A.toggleExpanderAriaLabel('review_text_read_more', 'Read more of this review', 'Read less of this review'); } }); })(); .review-text-read-more-expander:focus-visible { outline: 2px solid #2162a1; outline-offset: 2px; border-radius: 5px; } muy bueno
Muy buen producto
Cubrió mis expectativas, tapó fugas de cisterna de 5000 litros
excelente producto para sellar
Se Aplico directamente en condiciones de humedad alta sobre juntas de cancelería domo de cristal sellando de manera inmediata se aplicó sobre empalmes de impermeabilizante de techo impidiendo filtración de agua, tiempo desde la aplicación 3 semanas y sin novedad
Auto nivellant
Je le recommande très bon produit !!
Very good product
The product is fantastic, works well
Visit the Gorilla Store
BHD24665
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Or share with link
https://bolo.com/