About this item:
Product name: 10-port SATA3.0 expansion card
Product interface: PCI-E1X
Product chip: ASM1166
Support system: Windows 8 / Windows10 / Ubuntu /Linux.
(Synology can only recognize 4 hard drives; WIN7 users are not recommended to buy)
Specification:
●Comply with Serial ATA 3.0 specification, backward compatible with SATA2.0 / SATA1.0
●Comply with PCI-Express v3.0 specification and backward compatible with PCI-Express v2.0 / 1.0.
●Support 6.0Gb/s, 3.0 Gbit/s and 1.5 Gbit/s
●Support hot swap.
●Compatible with SATA6G, 3G and 1.5G hard drives
●Motherboard applicable slot PCI-E 1X and above
Note: RAID is not supported. The RAID in INTEL only applies to raw SATA. It is an expansion card that cannot support third-party chips.
Speed description information:
1. Use SATA3.0 data cable to achieve the best results.
(We recommend using this SATA 3.0 card in the PCIE3.0 slot to get the fastest speed.)
2. PCI-E requires a slot above V2.0. For V1.0, the speed will not exceed 250M.
3. Motherboard BOIS setting: SATA mode should be changed to AHCI.
Although some motherboards are PCIE 2.0 version, BOIS does not enable gen2 high-speed mode by default and needs to be turned on manually.
The fastest speed of PCI-E 2.0 is 380-450 m/s.
Different computer configurations and SATA SSDs have different speeds.
⭐If the detection is incomplete or unstable, please contact us to send the driver.
Packing List:
PCIe 1X to 10 Ports SATA 3.0 card *1
5-port 15pin SATA POWER splitter cable *1
Low Profile Bracket *1
SATA cable *10
3.9 out of 5
78.46% of customers are satisfied
5.0 out of 5 stars Card works great, make sure you power hdd's correctly
Initially, I thought there was an issue because sometimes the hard drives would disconnect. However, after talking with the seller they were able to figure out my issue immediately with almost no information. I was very surprised by their knowledge! For anyone connecting a bunch of hard drives together, make sure they have adequate power, I had connected multiple power splitters together and this resulted in the voltage to the drives being too low. The product works great and I was very impressed by the knowledge of the seller.
5.0 out of 5 stars worth the money
got it in a timely manner. installed easily and works great. no headaches.
4.0 out of 5 stars Works fine, not hot-swap
Overall, I'm pleased with the device.My only complaint is that it doesn't support hot-swap (it needs to boot with the disks already inserted to see them).
2.0 out of 5 stars Software Raid performance is horrible
When running a 5 drive raid 0 the performance for this sata controller is simply horrible. its even in a pcie 4.0 slot, and i rarely get more than 150MBs
3.0 out of 5 stars Doesn't work with multiple cards!
If you're like me and have been adding hard drives over time, be warned! When I plugged in two JBOD cards from the same manufacturer, my computer failed to POST!It did work with just (either) one plugged in, but that's not a reasonable restriction for cards this expensive
2.0 out of 5 stars Slow Boot Times (I'm not running the OS off of this card)
Slow Boot Times :(I installed this, it kinda worked but it took forever for the system (Win 7) to boot (3 minutes).Also took a while for all the drives to show up. I have 8 SSDs running off of this.No, I'm not running the OS off of this card, the OS is running directly off the motherboard. This card is strictly for media/storage. The SSD with my VMs is also connected directly to the motherboard.Get a PCIE 4x card using ASM1166+JMB575 Chips. It reduced my boot time to 39 seconds.
1.0 out of 5 stars JUNK
This product failed. I purchased another one before thinking it was my MB but it was notthis one quit on me too!!!DO NOT RECOMMEND This piece of JUNK. SUPPORT for the product is crappy
4.0 out of 5 stars NAS Help for good Price!
great value for the Price. have had it in a unit for 4-5 weeks running 24-7 . not ever hot or has it caused any throttling of data. it remains at top speed of my drives averaging 248mb/s on a raid 5 connection of 4- 14tb drives, and 6- 8tb EXOS Hd's. No issues at all.
Tutto ok
Installata su un server truenas e funziona alla grande tutto perfetto.
Prima Teil!
Nachdem mich die ziemlich schwachbrüstigen SATA Ports des frisch montierten Aufrüstmainboards ASUS ROG Strix Z690-F Gaming WiFi im Stich gelassen haben ( -->Rezension), und ich mich nicht dem Vorwurf aussetzen wollte, ich hätte durch die Montage (Ausbau zur Reklamation) diese selbst zerkratzt (schon erlebt), war dieses Teil die letzte Rettung, Das es sich auch um 6 GB/s Ports handelt, hoffe ich, dass es nur einen geringen Perfomance-Verlust geben wird. Alle angeschlossenen Festplatten werden erkannt und angesprochen. Was will ich mehr!
Great product and does exactly what i needed it to do
Very simple to install. I used my last PCI lanes when I installed a third m.2 card. This meant I could not read my SSD drives. Bought this plugged in my SSD x 2 and HDD x 2 computer rebooted and went into BIOS, set itself up. Rebooted and voila all my drives back.Very simple to use. It does slow down the read and write however I only need the others for backup. Great Product
Macht seine Arbeit.
Umfangreicher Controller für das Slebstbau-NAS.
Great bit of kit
All 11 hdd found in TrueNAS V12 but after days of testing I'm getting io errors. I've now change the card for a sas card with no error after 2 days of testing so far.
Visit the BEYIMEI Store
BHD29176
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Or share with link
https://bolo.com/