Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
Review:
4.9 out of 5
97.14% of customers are satisfied
5.0 out of 5 stars Great Jump Starter
I've only used it three times so far on the original charge and it works great. It's easy to use, compact, & it was a great price.
5.0 out of 5 stars When you need it, it's there
In the year or so I've owned my Gooloo (what a name!) it's done exactly what I needed from it. Mostly it sits unused but fully charged. Then when I suddenly have to jump start a vehicle, it just works. I've jumped my lawnmower on more than one occasion. My daughter and my wife have both needed a jump start for their vehicles and I finally had to use it myself when my car's battery died due to an alternator problem while I was 80 miles from home. In fact, I jumped my car four times in one day without recharging the Gooloo and it worked every time. It's simple and intuitive and has always worked for me, which is comforting on the side of the road or in a parking lot when the car's battery has died.
5.0 out of 5 stars good battery
I bought this product for emergencies and it is performing well as I am even charging my dead iPhone with it right now while I write this reviewExcellent emergency back up battery for the house and especially in the car. comes with very nice durable protective case.
5.0 out of 5 stars Reaaly works!! BELEIVE the mfgr'r's claims!!
This is a long, involved Review. So... be patient. I bought this Gooloo unit exactly 30 days ago. Today provided my first opportunity to test it out. Background: I'm a 74 yr old Disabled/Retired Senior; confined to a wheelchair. I live off of my monthly SS check; so, limited income/essentially no savings. I live alone, ~ 60 mi. S. of Abq., NM; and make one errand run into Abq., each month - ~ 140 mi. round trip, with the around-town errands included. I put less than 1500 miles on my car, per year. I inherited the car when my mother died in 2010. The car is a 2002 Pontiac Bonneville; so, closing up on 21/22 yrs old. The stock battery lasted 15 yrs, but I've had ongoing dead-battery issues, since. I've put in four NAPA-grade batteries in the last 7 yrs, or so; two, new (at ~ $200 a pop), and two under limited warranty replacement (~ $80 a pop). The battery lives under the rear seat, and, what with the nature of my handicaps... it's pretty much a quite considerable pain for me to replace one. Over the last 7 yrs, the car has suffered from some sort of unidentified, intermittent drain on the bat, that deads it out maybe six to eight times a year. I suspect something like a malfunctioning trunk light switch, but have never been able to nail down the exact issue (I rmv'd the trunk lamp/bulb, but still have the issue; so... go figure). Anymore, I ck the battery once or twice a week; but still run into the dead bat issue, all too often. Unfortunately, before I discover it so... the battery often sits dead for several days or more; sulfate'ing away, all the while; i.e., getting deader & deader each day, before I actually discover that it IS dead. If dead (sulfate'd) for too long (a week or two?)... the bat is unrecoverable; and then requires replacement. I have multiple, high quality bat chrgrs, but, if the bat's been sulfate'ing, it can take up to several hours, or more, to get it to accept enough charge to (barely) start the car. I have no garage, so the car lives on the street, out front; and it is not practical to use a Battery Tender/trickle charger on it (pwr cord/public sidewalk/safety issues). When I think the bat's getting marginal, I start the car, and run it for 15 minutes, to top off the bat. Background, complete. In reading the Bolo reviews (and some from other sites) I noticed a couple of reviewers lambasting the Gooloo unit(s) for having a small, actual AH (Amp Hour) rating. I had already been wondering how SUCH a small unit... could start a car; much less, the over 60 times per charge claimed for this unit (and, that, at ONLY 50% or greater retained charge [not supposed to use it to jump-start, at all, below 50% charge]). In the specs, this unit is rated at ~ 98 WH (Watt Hours). No actual AH (Amp Hour) Rating is provided. I've been in electronics all my career, so have the wherewithal to apply the appropriate math to the issue. 98 WH IS a tad under 8 AH; just as the negative reviewer(s) were/are claiming. It appears, however, that they were wanting to use the units to run some sort of meteorological/ecological instrumentation setups (?); and, sure enough, only 8 AH is hardly going to get that sort of job done! So... how does this all compute? A little more background is needed, here. Mfgr's commonly use a procedure called 'binning'; essentially, dividing the production line output into, essentially, Good, Better, Best ratings. Three-level binnings are common, though you can obviously go further; until reaching the level of full rejection/unacceptable performance/failure. I literally have dozens of Makita brand, battery operated tools; and have something like 37 batteries for same, in two sizes (AH Ratings). Most are fairly old, the oldest being in excess of 15 yrs. I used to pull all the bats every six or eight months, and run them all through my chargers. However, I found, over the years, that they (unless the bat/unit had been recently/heavily drained) typically achieved full charge in under five minutes; occasionally, as long as 30 mins. Commonly, though, most of my Makita bats reach Full in under 30 seconds!! (basically, the ones that have been sitting in unused tools - as long as a year - or more). Anymore, I run the Kita bats through the chargers only on an annual (or, longer) basis. And... with the same consistently impressive results! They REALLY hold a charge well!! This is a good example of First Binning lithium-ion cell selection (a 'battery', by definition, being comprised of multiple 'cells'); i.e., the batteries only contain the highest quality cells. At the other end of the spectrum, are the bats for my Ryobi brand tools (Home Depot). The Ryobi tools are incredibly cheap, and a 'relatively' good value; even if you just use them up to destruction, and then simply buy new replacements; as I've read some construction workers claim to regularly do. Unfortunately, the Ryobi batteries are the complete opposite in value. I quit buying them after eight batteries (I've had to toss out two, and have two more that are minimally functional/very difficult to take on a charge). Unlike the Makita bats, the Ryobi bats are only avlble from Home Depot (no where else - like at Bolo, for instance). Further, they charge $80 per bat, and are never discounted. Of my six remaining Ryobi bats, ALL fail to hold a charge for more than a month or so; and several, won't even hold a charge for a week or more. Further, unlike the Makita bats, they also don't seem to perform anywhere near their AH Ratings (also, compared to my Milwaukee tool bats). Though, I'm simply too lazy to have actually run AH Rating analysis on them (fixed resistor load, over measured time, to a set level of discharge). This is an obvious example of Third Binning (or, worse) cell selection. I might also note that this is old history. I recently noticed that Ryobi has newer lines of their bats, that appear to (possibly) be of better quality/value. But, having been soooo burned, in the past... I've not invested/investigated, further. Nor, plan to. When Milwaukee started up in competition to Makita's battery line(s) of tools, quite some years, back... I encountered multiple quality issues with their batteries, too. I had to toss several, as completely unusable/failed. That's when I discovered that procuring individual replacement cells, with which to change out the dead cells/repair the battery, was actually more expensive than simply buying a new battery!! I'd guess, when they were starting out, that Milwaukee was using Second or Third Binning cells. But, over time... as I replaced the trashed bats with newer ones, I think they had realized their error, and had moved up to using First Binning cells; as, from that point onward, and, to this day, I've had results with their bats, similar to the excellent experience(s) I've always had with my Makita bats. So... a large, 8-cylinder ICE-type engine's starter, as I recall, typically draws several hundred amps off the battery, during starting. Just for grins, and ease at math being done in my head, I use(d) 333 amps as an average draw. Obviously, with smaller engines/starters, the draw will be considerably less (or, somewhat more, in the case of a BIG truck's diesel engine, say). My car's engine is a 6 cylinder; so, maybe around 200 Amps, max? Assuming an engine is in good tune/shape, a typical start takes 3 seconds, or less. Say, five or six, if the engine is 'less than optimal', for what ever (hopefully, temporary) reason. Soo... 333 Amps, for three seconds, computes to roughly 0.1 AH draw (load). Thus, at the above loading level, dividing 8 AH by that 0.1... will yield '80 starts'. But, limiting to 50% Gooloo battery charge, and, just for grins, assuming linear performance from said battery, say... 40 starts. Then... figure that, most often, many starts take LESS than one to two actual seconds (time it off in your mind, then compare to your usual engine starting time duration experience). So... boost that '40 starts'... up to 60 starts. Which, in actuality, isn't at all that unreasonable a claim. That all assumes the Gooloo battery IS capable of a very high, short-term current (Ampere) output. How to assure that? First off, use ONLY the highest binning cells for the batteries. Likely, they even use 'special' cells; designed and selected for extra-high amperage output. Then, instead of using only one or two spot-welded straps to interconnect each cell to the next one, let's assume double, or even triple the number of straps. And/or, to further augment high current capability, assume usage of much heavier (lower current resistance) straps. Then... lets maybe assume using the types of cell construction developed for the electric car industry (obviously, high-quality, high-current-drain-capability cells needed, there!). Or, equivalent. And, thennnn... lets include enough cells in the battery (in series, that is - the voltages adding serially) to have a higher output voltage (often analogized/compared/equivalent to water pressure, in a hose); so as to more easily drive/supply higher current (volume - i.e., G.'s per minute of water) from the battery. I measured the output of the Gooloo unit I have; and it measures over 16 Volts (unloaded). At 3.7 Volts, nominal, per lithium cell (up to 4.2 Volts, fully charged), often mfgr's will claim 12 Volts, off off 3 cells in series. Better to go with four cells - 14.8 Volts, nominal. So, at 16+ Volts measured... maybe Gooloo uses five cells in series; or, perhaps, one of the alternate lithium chemistries (such as lithium-phosphate) - resulting in slightly different voltages per cell, and a slightly different total, for the overall composite battery. Add all this together... and I can understand how such a small battery (8 AH) CAN easily start a car. And, often... say, 50 or 60 actual jump-starts per charge cycle. Now... how did all this work out in my ACTUAL experience, today? To start, my battery was 'dead as a door nail' - i.e., deader than dead. Nada. Wouldn't even allow unlocking the door(s) (or, gas cap cover/opening the trunk) from the remote fob. Arrgghh! So... a prime case with which to test the Gooloo. I didn't want to pull the rear seat, to gain direct access to the battery, so popped the hood, and connected the way I usually use one of my battery chargers to try to recover/charge the dead battery - connecting the Gooloo's Black lead/clamp to a bolt on the engine's alternator mounting assy, and flipping up the plastic 'safety cover' leading into the primary fuse box's incoming 'Plus' terminal (my car has a secondary fuse box, near the battery, under the rear seat. Go figure.), to connect the Gooloo's Red lead to. Since the bat was soooo dead... and as outlined in the Gooloo's Instructions... after obtaining the Green light on the jumper cable module as blinking... I pressed the little nearby 'Boost Button'... and got a solid Green. As soon as I had connected the Gooloo, and prior to pressing the little button, all my running lights and such, had lit up merrily bright. 'Encouraging!', I had thought. But, when I got in the car and hit the starter... all I got was a short 'blip' - no starter turn-over - and... all the lights went out. Grumble, grumble!! But.... I certainly wasn't ready to give up. Yet. I got back under the hood, and checked my connections. When I jiggled/ck'd the Black lead... I got sparks! Indicative of an inadequately secured connection. I made sure it was WELL clamped in place, this time, jimmying it about as bit, so the teeth of the clamp could pierce through any oxidation on the bolt-head I'd chosen. And... all the lights came back on - brightly! THIS time... when I hit the starter...the engine spun enthusiastically...and - 'Vroom'! - started right up! Happy camper, I!! :-) :-) So... I am VERY confident & happy, now, in/with my Gooloo unit. And, by my above suppositions and calculations... do not doubt the claimed '60 jump-starts' being advertised/claimed for this unit. I'm impressed with the Gooloo in ALL considerations (as so well detailed/outlined by the other reviewers). HIGHLY Recommended!! Addendum: It's about ten days later from the above, now. Once again... grumble, grumble... my car's bat is all sorts of dead. Only this time... the Gooloo couldn't start it - at all. I had noticed that Bolo had posted my Review as the 'Most Positive' review. I hope it stays that way, as I am still feeling very positive about the Gooloo unit; but... now having encountered some real world limitations to it's 'practical' usage - thought that they were worth being noted, here. I had also noticed that the 'Least Positive' review had complained that the Gooloo was unable to start his vehicle, when he had a very dead battery. Considering my success with doing just that (in the upper/first part of this review), I was a bit... puzzled/surprised. Well... no more. Apparently, earlier, I DID have a very dead battery; but... no where NEAR as truly double-dead-dead as with this 2nd attempted use of the Gooloo unit. As before, I had connected the Gooloo, engaged the 'Boost Button', and got (external) running lights; but lost all, when I (unsuccessfully) tried to start the vehicle. Just got nothing; no starter turnover, and 'lights out'. The Gooloo went from Boost Mode, back to a blinking green light on the jumper module. Tried it several times; same, each. Arrgghh! However... I did recall that the instructions advised letting the Gooloo be attached for a few minutes PRIOR to jump-starting; which I had been knowledgeably/purposely been avoiding doing, as I had been more interested in subjecting the Gooloo to worst case, 'street' conditions/usage. Well... things just got even worse for it, this time. Sooo... I decided to let the unit hang onto the car's bat, and transfer some charge into it; in hopes that that would enable the Gooloo to, a little bit later, jump start it. Fortunately, all this is/was going on at my residence, not 'out in the wild'; although that was exactly why I was trying this particular methodology out - like this, here & now. In watching the unit, I noticed the green light cycling - 6 seconds On, one sec Off, then, repeat; consistently. After having gotten bored watching that, I moved over into the shade of the building; from which vantage (out of the bright [hot!] sun at the front of the car), I was able to observe the rear running lights. Which were bright for four secs, dimming to being out completely, over the next 2 secs, remaining so for the 1 sec the jump cable module's SoC ('Solution-on-a-Chip' - the industry's nomenclature for a custom-designed, single-purpose IC chip) was using to Reset itself, each cycle, and then repeat - over & over. So I felt confident that the Gooloo WAS transferring charge into the vehicle's battery. (Which did, indeed, later prove to have been the case). After all was over, I plugged the Gooloo unit into a charger, via USB-C. Before, the unit was showing 2 solid bars (when I disconnected it); now, while initializing charging, it had 1 solid bar, and was blinking the second one (later, progressively, the 3rd and 4th ones) - thus, my conclusion that I HAD xfer'd OVER half the Gooloo's charge into my car's battery. BTW, despite being connected to a 50W charger/wall-wart, that I often use on my Samsung S23 Ultra cell phone, the Gooloo took 5 hours to reach Full charge; thus leading me to the conclusion that the unit's firmware does not honor/recognize Hi-Speed USB charger protocols (perhaps introduced AFTER the Gooloo's design phase had been locked in place?). But... after 15 minutes of charge xfer time had passed... the Gooloo still couldn't start the car. When I disconnected it, I noticed that the Gooloo bat's power indicator showed 2 bars (see above); indicating it HAD xfr'd some energy into the car's bat. A bit over half of the Gooloo's 8 AH capacity, as DID actually prove out. And... the instructions DO state NOT to try jump starting below 50% charge (which this unit WAS at, at that point). So... maybe... had I only xfer'd charge for, say... 5 minutes?... MAYBE... the Gooloo (being at over 50% charge, at this 'conjectural' point in time) WOULD have successfully jump-started my car. I'd like to think so; and, if similar circumstances present again, in future, will test out such. Back to today... I then set out my safety cones, ran out an extension cord, and hooked up my (larger) car bat chrgr. Which, like so many things, today, is waaaay over-software-engineered; meaning that all the supposed advantages to doing so, during the design phase... often result in annoying, real-world limitations, in day-to-day usage scenarios. Which, in this case... the charger wanting to see at least a FEW volts on the battery... often leading to hassles getting the durned thing to actually charge the battery at all - when encountering a very dead one! Fortunately, however... in THIS circumstance... it read out 4 Volts present in/on the car's battery; thus verifying the Gooloo's energy xfer. I let the AC charger do it's thing for about an hour... returned to find that car's bat at ~ 11 Volts, and maybe 35% charge, and, then, managed to successfully start there car. WHEW!! So, for 'normal' dead battery issues, and with an otherwise viable, healthy battery... I feel the Gooloo unit is STILL to be Highly Recommended. However... when encountering VERY dead/unhealthy-unhappy/compromised batteries (like mine was/is)... it would be wise to be aware of the above limitations. Best of luck to you all.
4.0 out of 5 stars Worked like a champ!
My car had not been driven for a few weeks, so it wouldn't start. I couldn't get it started with regular jumper cables. The battery was too low. I order this. It took longer than the 2-day shipping that I expect from Bolo (a negative, which will count against the vendor and not the product). I let the jump starter charge overnight. The next morning, I attached the jump starter to the battery. It's indicator said that the battery was too low, which meant I needed to use the booster feature. I didn't hold out much hope for it working, but I tried it. It worked! I got my car started. I am going to be getting one for each of the cars, because this is a single woman must-have!I would have given it 5 stars, but it does not come with a wall plug adapter to put the USB cord/plug into. I don't want to be hunting around for a plug adapter every time I want to charge it. I'm not going to charge it from the USB in my computer and I'm not going to plug it into my cigarette lighter in my car (I am not even sure I have one in my car). I want to be able to plug it into my wall, and I should not have to buy or steal a plug adapter to do that!
5.0 out of 5 stars This thing’s powerful
Very strong. Battery in vehicle has sat over a year, and was completely drained. Hooked this up, and started easily, immediately. Lightweight and rubber is nice so it’s not sliding around when sat on something. Works like a charm.
5.0 out of 5 stars It's so easy to be a hero
I'm the type of person that has a flexible unfolding hook ladder in the upstairs bedroom. In my house you are never more than ten paces from a hefty fire extinguisher. My first aid kit makes the back of an ambulance look shabby. I can deliver a child, set a broken bone and if the power goes out... well, not at my house. I like to be prepared. Not "prepper" prepared, I've only got a few months of food on hand, but let's just say when the pandemic hit, I was just fine for toilet paper. So I take my automotive disaster management seriously. I have had many "jump-boxes" in my trucks and cars over the years and when it was time to update I did my homework, and I don't mean just reviews. I tried four well-starred products out last winter on my electrically challenged Isuzu box truck and the GP4000 outperformed on every metric- ease of use, speed of charge to start, and total number of starts without recharging. The only thing I don't love is the name- GP4000? Really? Why can't they call it the "Bumble Bee" or "Gold Lightening" or something less faux technical? Heck call it Steve- how cool would that be? "Hold on mam, let me get Steve out of the trunk, we'll get you moving in no time!" In the end that's the best thing about Steve- how often you can help people. The parking lot where my workshop is has at least one dead battery a week and because it also has a giant antique store most of the dead batteries belong to people over 70. The look of relief on their faces when I tell them, "No problem, I'll have you running in under ten minutes," well, it's worth every penny.
Visit the GOOLOO Store
GOOLOO GP4000 Jump Starter 4000A Peak Car Starter (All Gas,up to 10.0L Diesel Engine) SuperSafe 12V Lithium Jump Box,Auto Battery Booster Pack,Portable Power Bank with USB Quick Charge and Type C Port
BHD71817
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
More from this brand
Similar items from “Jump Starters”
Share with
X
Or share with link
https://bolo.com/