MOFEEZ Power Distribution Block Bus Bar, 4 x 5/16" Posts, 6 x #8 Screws Terminals, Max 48V 250A (Pair, Red & Black)

Description:

About this item:

  • Basic Parameters --- 6*#8 stainless steel terminal screws, 4*5/16" studs. The dimensions: 6.7"Lx1.3"Wx2.1H".
  • Operating Voltage/Amperage range --- Max voltage: 48VDC. Max continuous amperage: 250A for the entire connection. Maximum intermittent: 20A for each connection (less than 1 minute). So whether your working on a boat, a car, or an RV, we've got you covered.
  • Built for Safe --- Nickle plated brass busbar plates offer low resistance, maximum conductivity, and corrosion protection. The nylon nuts connect to two external studs to prevent accidental short circuits. A removable Nylon cover keeps metal components from making contact with anything. The insulated nylon base is flame-retardant.
  • Distribute Power More Efficiently --- Provides several large gauge connections for running a dedicated ground to the battery and offers more minor gauge connections for lower voltage.
  • Wide Applications --- Mofeez bus bar is an excellent circuit collection wire Harness in the car, RV, yacht, caravan, and ship power system. The busbar holds wide cables securely to keep the wires neat.
  • Review:

    4.9 out of 5

    97.78% of customers are satisfied

    5.0 out of 5 stars Don't Let the low price fool you!

    J.A. · August 27, 2024

    These Bus Bars may be inexpensive but they are solidly constructed and as long as I use them within their tolerances I expect years of service from them. Thanks for delivering a quality product at an affordable price!This is my 2nd order of this product. The wrong item was shipped, (3 pairs women's stretch pants?)But the Bolo customer service lady took care of that quickly for me and shipped the proper BUS Bars out the same day! We all mess up sometimes, Thanks for making it right Bolo!

    5.0 out of 5 stars Well made

    M.P. · October 10, 2024

    I connected my battery, inverter and dc controller to this block. 5/16 bolts. Worked great.

    5.0 out of 5 stars Solid and sturdy bus bars

    J.Y. · July 19, 2024

    The combination of the larger posts and the smaller screws makes it easy to connect large gauge and small gauge wires with different terminals. I’m using this in my off-grid shed solar project, and it’s so much easier than forcing multiple connections on a single point. Plenty of room for growth with my system.

    5.0 out of 5 stars Big, beefy bus bars with lots of nice small design features and nice insulating covers

    N.S. · June 21, 2023

    This are bigger than expected but I'm not complaining because they handled 170+ amps through individual lugs without heating much at all. The design is really nice, two of the lugs extend further than the others and hold the cover on with nylon insulating nuts. I made my own bus bars to connect laterally from the studs to some 200A breakers on each side, and didn't have any trouble setting everything up. This bus bar and it's screw terminals are overbuilt enough that when the lugs are tightened down, it feels like it becomes one solid piece with everything attached to it, with no wiggle or play at all.You can unscrew all of the smaller screw terminals which go down either side, leaving the entire surface around the large lugs free if you need more surface area for contact to handle higher amps. The plastic cover is also easy to trim with side cutters if you need a few more millimeters of clearance around the edges for large connections (it doesn't shatter unpredictably like bakelite would).

    4.0 out of 5 stars UTV Battery Distribution Terminals

    T.B.S. · March 13, 2024

    Worked great in my Polaris Ranger

    5.0 out of 5 stars A must for parallel battery connection

    R.g. · March 1, 2024

    Very good quality and ease to install just the right amount of battery connections and the clear cover looks really nice.

    5.0 out of 5 stars Bus bar

    A.C. · June 25, 2024

    It was time for me to clean up the wiring in my center console boat. These bus bars are good quality and easy to use.

    5.0 out of 5 stars sturdy distribution blocks

    A.C. · May 23, 2024

    Easy install. Hardware was good quality. No mounting hardware was included. Did the job perfectly.

    What I wanted

    R. · November 29, 2022

    RV install

    MOFEEZ Power Distribution Block Bus Bar, 4 x 5/16" Posts, 6 x #8 Screws Terminals, Max 48V 250A (Pair, Red & Black)

    4.8

    BHD17471

    Quantity:

    |

    Order today to get by

    Free delivery on orders over BHD 20

    Return and refund policies

    Product origin: United States

    Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.

    All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.

    More from this brand

    Similar items from “Connecting Blocks”