About this item:
Simple Deluxe 16″ Adjustable 3 Speed Pedestal Stand Fan is ideal for Indoor, Bedroom, Living Room, Home Office & College Dorm and other areas that may need a portable stand fan. Featuring blue LED display, remote control and auto power off functions, the standing fan is designed for long-range and full function control (up to 20 ft). Different speeds make our pedestal fan ideal for different places. There are low, medium and high wind speed for you to choose according to different situations and temperature. Different wind speeds make our pedestal fan ideal for many places like office, home and so on.
4.0 out of 5
80.00% of customers are satisfied
5.0 out of 5 stars Great high power fans!
I have house that's almost 100 years old and the electrical system can hardly support modern microwaves and toaster ovens so air conditioners aren't much of an option. The only AC in my house is a large 220 volt window unit on the 2nd floor. Have one of these fans to blow the cold air down the stairs to the 1st floor and the 2nd at the bottom of the stairs to blow the air into my livingroom.These fans are great for airflow and helping you feel cool during hot weather. Their LOW setting is more powerful than standard box fans from places like Walmart. Even on low you can feel the air blowing from over 10ft away.Assembly was easy and the fans are sturdy since they are mostly made of metal. The base is quite heavy making them stable (and as a bonus, my cats seem to like sleeping on the base). The fan can be directed 360 degrees vertically and horizontally so you can easily direct the airflow anywhere you want.But being powerful fans, they can be loud. Fine for a bedroom or hallway where it acts as white noise, but in a livingroom you might have to double the TV volume to hear it as clearly as when the fan is off.
5.0 out of 5 stars High velocity and works great
It's very powerful the size is perfect the higher you turn it up it is a tad bit noisy but not too bad I can handle it it's like soothing it's like having a white noise machine in the background but it is totally worth it it works wonderful and in the heat it keeps you very very cool very easy to assemble.
4.0 out of 5 stars Good fan, but fancy, and it beeps
This is a good fan, but I would have been happier with a non-electronic one. I haven't used the remote and probably won't. The assembly instructions are very confusing, and the diagram doesn't help as much as you might think, but it went together easily enough once I figured out what I was supposed to do. Caution: the fan blades need to go on in a particular direction, or it will blow backwards; the instructions don't mention that at all.It blows much more strongly than my old fan of the same size. Even the low setting is pretty strong. There's a sleep setting if you want it to turn off after a set number of hours. (I don't.) There's also a "natural breeze" setting that varies the intensity. I can't imagine what the use case for that might be, but someone might like it.The controls on the fan and on the remote control are labeled differently. Most importantly, they use "speed" to mean two different things. The remote has "speed" (low/medium/high) and "mode" (regular/natural breeze/timed). The "speed" button on the fan itself sets the regular/natural/timed function; low/medium/high is controlled by a large, unlabelled button.Something to be aware of if you plan to use this in a bedroom: the large button that controls the speed has an always-on light around it. The low/medium/high setting is shown by a red light when it's on. This can be a problem at night. (Although it does make it easier to find the buttons in the dark.)The fan beeps twice when turned on and once when turned off. There is no way to silence this. Overall, the fan is louder than some, but not impossibly so. If you like white noise, you'll love it.
5.0 out of 5 stars Pug approved and best oscillating remote fan I could find
The media could not be loaded. It's the quietest fan that oscillates and has a remote and many options I literally bought like 4 different varying brands from a well known one that the remote would turn it on but you had to get up to make it oscillate and that reliable brand the higher you set it the faster it oscillated which was annoying and it was mega loud but after trying everything else I initially thought this wasn't as good it ended up being the best for what I wanted and I thought it's affordable price meant it wasn't as good but its cage came bent and damaged but I man handled it into submission lol but it's honestly the best choice I could find after ordering many different kinds all jokes aside it's a good fan for those who don't like to get up to adjust fans it's starting to collect dust but hopefully the vacuum will work
1.0 out of 5 stars Manufacturing defects. No hole in base. Knobs to fix fan angle in place defective.
I couldn't assemble it. The directions included only the obvious steps and no explanation of how.I had the manual. In asked how. The instructions do not explain this. They are poor, incorrect, and insufficient.The instructions say:1. First put the bottom cover(7) on the base(8);2. Install the telescopic tube on the base and lock it with a nut(9);That means, I am to fasten the tube to the base using the l- shaped screw, washer, and nut. So I have to insert the screw through the washer into a hole at the bottom of the base? THERE IS NO HOLE IN THE BASE.There are a knob on each side so you can Tilt the fan and lock it in place. A plastic surface contacts the wire frame. The frame suits at an angle to the knock at the top parts of the U- shaped structure holding the fan. On one side the contact plastic is at an angle so the whole surface contacts the wire frame, but on the other side the contact is straight so it contacts the wire at one point so it slips. Normally this would mean you can't tilt the fan, but in this case it is also bending the wire.The labels in the assembly components do not match the items they point to.9 is not "nuts" it's an l- shaped screw, a bolt to be exact6 is not nut.4 are not nuts they're screws.Instructions:Nuts do not need screwdrivers, they need wrenches. The instructions said assembly required a screwdriver, but there doesn't mention any screws. If the instructions are translated or interpreted into English that should be done by someone who's native language is English.The instructions are for a lay person and any one with a low level of education and no technical experience should be able to follow them.Google translate would have done a better job of translating to British or American English.Thank you,Mo
High Velocity
Works great. Everything came assembled except for the stand which was super easy to put together.It has a high velocity wind which came in handy during the hot summer. Cooled down the entire living room. It does have some white noise but I love that sound as it lulls me to sleep. It mutes the outside loud, obnoxious noise from crappy music and people shouting about which wakes me up; as an insomniac, I cherish the little sleep I do get!
A really awesome fan!
This fan is really awesome! While it is loud, I actually like the white noise. It is very powerful! I have only needed to use it on the first setting & the amount of air it pushes is great! Ive had others in the past, that were not near as powerful on 3 as this one is on 1. I hate the heat when I sleep. This fan cools really well.The only thing I wish were different, is the that the cord should be longer by a couple feet. I don't mind that is does not not oscillate side to side, as I have it set up exactly where I need the air to flow. It can be adjusted height wise & you can move the fan itself up & down. For me, it is well worth the money. Keep in mind that it is indeed a loud fan & if white noise is your thing, then this fan will be great in your bedroom. I'm sure it will be perfect in a living room & a garage as well. :)
A bit too intense for my liking
It works great, almost to a fault. I get super hot in the summer without A/C so I wanted the best possible industrial home fan I could get and this is just a bit more industrial than homey to my taste. I would need to keep it a bit further than my bedroom wall allows to sleep comfortably at night, so I put half of it behind the wall, lol. It's also super heavy so not that easy to move around for me. Lastly, it is so powerful that if you rotate it a bit too much upwards or downwards, it makes a super annoying noise which kinda force you to keep it straight which is also the problem since it's so powerful you don't always want to have it blowing fully at you. Good quality though.
Moves a lot of air.
It isn't really a fancy household fan but a shop fan. Very basic but works amazingly well. Very happy with purchase and probably will buy a second because of how well it cools and moves the air. Excellent fan.
Would not recommend!
The first thing I noticed the Fan was clearly used and had a broken price in the box it was pre assembled the wrong way first like plugging it in it shook like crazy, i always use high velocity fans the shake a little not this much, i re-assembled the fan and it was a little better but still shakes a lot unfortunately i accidentally threw the box out otherwise this would be a return extremely disappointed i really like the fan has enough power makes enough noise for me to sleep soundly but had to adjust everything around it so it wouldn't move so much! I couldn't figure out where the broken piece goes maybe thats why but for $140 a fan that used and assembled the wrong way yeah that was very disappointing!
Visit the Simple Deluxe Store
BHD36952
Quantity:
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
Or share with link
https://bolo.com/