WEP 929D-V 2 IN 1 Desoldering Iron Electric Solder Sucker with 5 Nozzles 0.8/1.0/1.2/1.5mm Soldering Tool Kit with Built-in Desoldering Pump, Iron Stand, Sponge, Cleaning Pin Solder Remover

Description:

About this item:

  • Complete set of accessories: Our desoldering tool kit includes WEP 929D-V Desoldering Iron, 5 interchangeable desoldering nozzles (0.8mm & 1.0mm & 1.2mm & 1.5mm ) for 4 different sizes of through-hole components, a heat-resistant iron stand, a cleaning sponge, some cleaning pins. If you are looking for a complete desoldering tool that can handle desoldering jobs for various through-hole components without clogging, it is time to buy this one.
  • Safe continuous desoldering: This product is 2 IN 1 soldering iron and desoldering iron that can be operated with a single hand. Our solder sucker tool provides a uninterrupted desoldering experience, and the heat deflector reduces heat for your hands, and you can desolder components with comfort. The desoldering kit is also equipped with a simple soldering iron stand, allowing the solder sucker can rest securely on the stand when not in use.
  • Easy to operate: It needs 3 minutes of preheating when connected to power. To use, charge the piston, melt the solder 100%, and press the release to extract the solder. Our desoldering kit includes 5 desoldering nozzles that are replaceble. (Nozzles are consumable items) Note: Replace the nozzle after the desolder iron has cooled completely
  • Easy to clean: Our product is super easy to clean.Cleaning can effectively prevent blockages from damaging the product. The scrap solder storage tube is removable for cleaning, and our desolder removal kit comes with a cleaning pin that is used to clean the heating element.
  • This desoldering iron kit is covered by our exclusive 1-year USA technical support, with 24-hour assistance from our dedicated team. Note: This product is rated for 110-127V USA specifications. Do not connect this iron to a 220V power socket.
  • Review:

    4.6 out of 5

    92.50% of customers are satisfied

    5.0 out of 5 stars Works as advertised

    T. · December 18, 2024

    Works as advertised. I had to remove an RCA component from a motherboard in order to replace it. I let the iron heat up for 5 minutes per instructions. It did smoke for a bit as explained on the tag. I set the suction trigger, placed the tip on the solder connection and the unit quickly melted the solder. I pushed the button and all solder was sucked into the reservoir, freeing the component from its connection to the motherboard. I removed 9 solder connections in this manner and it worked flawlessly. Recommend. Good value.

    5.0 out of 5 stars Works better than the big ones much of the time.

    H.V.g. · November 24, 2024

    I do electronic repair professionally. I've directly compared this unit to electric vacuum desoldering pumps that run 100s of $$. This unit will often outpull a vacuum pump, because the speed of the spring-loaded piston sucks in a lot of solder/air mix quickly. Having a hot iron on the connection while the air flows is an improvement over unheated Soldapult type devices, which are cheaper. In this case, you get what you pay for.Will I give up the vacuum desoldering station at work? No, because if you have a lot of connections to do, and/or don't want to clean out the tool as often, the big stuff is worth it. For smaller projects, though, this unit works great.

    4.0 out of 5 stars Good enough for hobby use

    L. · June 10, 2024

    It's kinda cheap, but I must admit it does a fine job of desoldering. The suction tube, that contains the spring and plunger, is plastic, which is a concern. The tip is held in by two machine screws, that fit poorly. One of them doesn't have a washer since it's a mm shorter than the other. But it does indeed work. If you used it every day, I can see it falling apart in a few months, but for occasional use, it's pretty good.

    5.0 out of 5 stars Great for desoldering

    s. · January 20, 2025

    I should have purchased this years ago. I have used wick, suckers, and many other methods over the years but this unit works great for all my desoldering.

    3.0 out of 5 stars Not very powerfull

    R.M. · November 18, 2024

    I have to try several times before it takes enough tin from the point.

    5.0 out of 5 stars Great tool!

    D. · January 6, 2025

    .

    5.0 out of 5 stars Very nice tool

    D.L. · March 14, 2024

    Sure beats the two handed method I have done for years. Comes in real handy when you have a bunch of solder joints to desolder. Speeds up the job. Disassembly for cleaning works well too. Only issue I had was upon initial use the unit began smoking. I got around that by plugging it in near my kitchen stove and used the stove's hood fan to remove the smoke from my house. After about 5 minutes the smoke ceased.

    5.0 out of 5 stars Functions well

    C.W. · November 13, 2024

    Good service for cost

    WEP 929D-V 2 IN 1 Desoldering Iron Electric Solder Sucker with 5 Nozzles 0.8/1.0/1.2/1.5mm Soldering Tool Kit with Built-in Desoldering Pump, Iron Stand, Sponge, Cleaning Pin Solder Remover

    4.3

    BHD27150

    Quantity:

    |

    Order today to get by

    Free delivery on orders over BHD 20

    Return and refund policies

    Product origin: United States

    Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.

    All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.

    Similar suggestions by Bolo

    More from this brand

    Similar items from “Irons”