Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
Review:
4.9 out of 5
97.78% of customers are satisfied
5.0 out of 5 stars Look great, work great, fairly easy install.
The media could not be loaded. TLDR: Look great, work great, fairly easy install. Govee Permanent Outdoor Lights Pro are the way to go.Really glad I didn't pull the trigger on the first gen lights and waited for the Govee Outdoor Lights Pro. The 200' was perfect for my needs and I ended up using 196' and clipping off the last few lights. With the booster module it's great being able to power the entire thing from one end instead of having to do power injection or plug in at multiple places. The Pro version gives you options for extending, cutting and splicing that wasn't possible before. The splice units are super easy to use with Wago style toggle connections. The short and long extensions are great if you need to skip an area, say to go up to a second story. I couldn't find the exact contents for the 200' set anyplace, so here's what came in mine: 12 stands of lights; 4 each male and female splice connectors; 4 - 4' extension cables; 2 - 12' extension cables; power brick, control unit, signal booster (for 200' for kit only); lots of mounting clips and extra adhesive tabs. Really wanted a clean looking install so I mounted the power and control units inside an Orbit irrigation control box after running power to my install location. Also wanted to minimize clip use and bought some 3D printed mounting brackets that fit over the lights. They make the lights look slightly bulkier but I was able to limit clip use to turning corners or working around an obstacle. I spent a lot of time untwisting and flattening the cable to get it as flat as possible. Kind of a pain but the flat cable is what makes splicing possible for DIYers so I'm not complaining. The instructions say to use an automatic wire stripper for splicing. It's not clear if they were talking about the outer sheath or the three internal wires, but mine absolutely wouldn't work on the sheath. I had to very carefully cut that with a razor knife. All told it took some non-OSHA approved ladder shenanigans and two full days of work as a somewhat competent DIYer and I'm happy with the results. IMO the Govee Permanent Outdoor Lights Pro are the way to go unless you want to spend thousands on a pixel or puck system and learn Wled. The estimate I got from Jellyfish lights was 6k. While not inexpensive Govee has frequent sales and I got the 200' set for $560 and saw them for $480 on Prime Day. If you are new to Govee the app isn't perfect but they update and improve it frequently. There are plenty of lighting options that require only one click to get started. The app has close to 100 preset themes for holidays, seasons, etc. The video is the "Universe" theme, pics are warm and cool white respectively. The pro have dedicated warm and cool white leds that are great for general illumination. Using the app I created an automation so they come on with a color effect 30 minutes after sunset, change to warm white 30% brightness at 12am, then turn off 30 minutes before sunrise. The DIY function allows you to create any combination of colors and patterns you can think of. I've been using the new AI bot to create light scenes and it's kind of fun.
5.0 out of 5 stars It is a small fortune but it is worth it !!!!!!
The media could not be loaded. I did it !!! I broke down and purchased the GOVEE Pro lighting system for my house, everyone on the forms and reviews praised GOVEE for the Quality, the Features, The Functions, The VHB tape, and the lights, from the brightness to the longevity and the vividness of the colors!!!! So Far I can not complain!!!!!! now As you can see in the Pictures I do not have the easiest roof line to hang these lights and when you add the 3 d printed retainer clips it just takes that much longer to complete the job. I am not a young man anymore, I am slower and not as sure footed as i used to be so I decided to forgo the Route of the Ladder(and with 3 18ft peeks I just dreaded doing it) and rented me a 35 ft man lift from the BigBox Store. Now it added to the expense of the job but I would still be out there today (6 weeks LAter) climbing up and down the ladder putting these up. I did order the 200 ft Kit and for my house I was able to completely wrap the lights around my entire house. The final look is amazing!!!! a couple of times for anyone who is concerned about taking on this type of project. I recommend you pre plan your actions; first, you will want to make sure you unwrap your lights from the wire ties they were shipped in. This will do 2 things, one if you hang them in the sunlight it will soften the wire loops and straighten the wires making it easier on your fingertips when you are putting the lights up and you want the wire super straight. Secondly, if you connect your light strands together and lay them out or put them on a spool(I chose the spool because of the man lift, as it kept me from stepping on them) you will not have to reposition too many things every time you move the ladder down the line. ALso you want to figure out before you actually start installing the lights , exactly where you want them to be under the overhang of your roof. I suggest taking a couple of lights and hanging them with temp configuration by hanging 3or 4 as close to the wall as you can and then 3 or 4 in the middle of the overhang and then the last 3 or 4 as far out. This will help you identify what looks the best for your house and your liking. When you have decided on the spacing I took a small piece of cardboard and cut it to the width of where the wire is going to be on the eves. This will allow you to take a pencil mark where the wires need to be and your mark will keep the lines as straight as possible. Next I suggest you have a tool bag/belt with all of the things you will need to complete the project, template for you wire guide and a pencil, a small trash bag for all of the tape covers you will take off, a screwdriver to screw the wire clips (supplied in the Kit) in place. something to keep your screws together so if you need one you can get it easily. also a small pouch or container to separate the wire clips from the screws to easily grab them when needed. You will also want some paper towels and alcohol to clean the spot where you are going to stick the lights so they get a good hold and will not fall off too early. These are just some of the items I needed to put up my lights. You may also want a head mounted flashlight if you don't have adequate light or doing it in the evening. I took a couple of days to plan out my attach plan because I was renting the MAnlift and needed to maximize the output because of the cost and I only had 24 hrs till I needed to return the lift. so making unnecessary tripe to get a tool or something was just not in the plan and would slow me down. I also chose to pick up some 3 d printed covers for the Govee Pro Lights. They were a bit more expensive, but the piece of mind was that the pod lights were screwed into place along with the VHD tape, and I never would have to rely on just the tape holding the pod in place. Again a bit of an expense but in my situation with the 20 ft peaks I don't want to climb a ladder if the tape fails in 4 or 5 years!!! The look is much better than expected. and the lights in the picts are set at 15% brightness because 100% is too bright!!! The only complaint I have about these Lights Is with the APP there are so many features and combinations of functions it is a bit overwhelming. Also there is a section where other users can share configurations, which is nice. The only thing is there is no explanation of what each one is and there are thousands of them. so when you click on one and want to come back to it later it may be lost if you are not paying attention to the name on the shared config. also I wish there was a place where you could preconfigure the lights like a lab type environment so you can see what something will look like without it happening in real time. This would help when you are trying to put scenes together and link them for a show!!
5.0 out of 5 stars So far these lights are absolutely epic.
Lights functionality well, 16 million colors to pick from. Easy to install. They seem durable only time will tell. They fit under my eves well. Lifespan flickering into what may seem to be nothing. I'll update after the mothership lands
5.0 out of 5 stars Worth Every Penny - Professional Grade
I am extremely impressed with the lights. The Pro version was 100% professional grade. They were easy to install, easy to set up, and look amazing. Here are my tips for a successful install:- Place lights 4-6 cm from wall (Govee recommends 3-8, but further you go the less crisp it looks)- Use a piece of cut wood for consistent spacing- Make sure you install in warmer weather, glue doesn’t bond as well in cold- Clean soffit well- Plan design ahead of time - you have limited transition pieces- Visit FB or IG page for ideas and more photosIf you on the fence, just buy it. FYI, it took me 8 hours to install. Now I’m going back over and painting them with a small brush to match color. Shouldn’t take too long.
Looks absolutely amazing
Software is very user friendly and easy to setup.The 3M tape works perfectly and instructions are very clear!Great brightness and amazing look with the preset settings.
Wow!
I have been looking a those lights for a while,.and when i bought a new house, I knew i wanted the neighbors to be a bit jealous... well did i ever achieve!... they are amazing, easy to make your own scenes... the presets are also enough for someone who wouldn't want to spend the time of making your own scenes.The Pro version is made to cut and comes with extensions and splice connectors, i had enough in the box to make all the dormers, hips and gaps i needed.
Look amazing!
Install was pretty straight forward and the final product works amazing, very pleased!
Ensure the area you plan on sticking the lights.
Love the lights so far. They look awesome!! I used some brake cleaner to clean the surfaces prior to sticking. Also used #6 square head screws instead of the ones supplied. Made installing them so much easier. I highly recommend them. Hopefully they last a long time given the price. Seem to be high quality, even down to the boxes they came in.
Excellent product, but very poor Amazon Service
I ordered the product during Prime Days on Tuesday with a delivery for Thursday. Wednesday morning it's still at the same price but delivery by Wednesday evening. Customer service (including the supervisor) was unable to expedite the shipping. They said they don't have any access to fulfilment, and literally just dropped the line.The product is good and worth the money at the prime day price.
Visit the Govee Store
Govee Permanent Outdoor Lights Pro, 200ft with 120 RGBIC LED Lights for Daily and Accent Lighting, 75 Scene Modes for Halloween, IP67 Waterproof, Works with Alexa, Google Assistant, Matter, White
BHD415150
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
More from this brand
Similar items from “String Lights”
Share with
X
Or share with link
https://bolo.com/