Choose your country
Delivery choices and times vary depending on your location
Description:
About this item:
Note:
Pavo20 brushless whoop drone only supports 3S batteries.
Camera and VTX are not included.
BETAFPV Pavo20 Brushless Whoop Quadcopter with HD Digtal Bracket, PA12 Material, F4 2-3S 20A FC , 1103 8500KV Motor, COB LED Strip, Compatible with DJI O3 for FPV Racing Indoor and Outdoor
Item: Pavo20 Brushless Whoop Quadcopter
Wheelbase: 90mm
Empty Weight (No Battery, Air Unit): 54.51g
Support VTX: DJI O3 Air Unit /Caddx Vista Kit /RunCam Link
Support Camera: DJI O3 Camera /Caddx Series /RunCam Series 19mm, 20mm (Not included)
Camera Filter Installation: Vertical
Battery Slot: 20mm*Unlimited Height
Recommend Battery: Only 3S 450mAh~650mAh
Recommend Parts
FC&ESC: F4 1S 12A AIO FC V3, F4 2-3S 20A AIO FC V1
Motor: 1103 | 8000kv/8500kv/11000kv
Propellers: GF 2015-2B, GF 2020-4B
Battery: 3S 450mAh~650mAh
Package
1 * Pavo20 Brushless Whoop Quadcopter(Without HD VTX&Camera)
1 * Pavo20 HD VTX Bracket
1 * HD VTX Bracket Screw Package
1 * Pavo Series COB LED Strip Accessory Kit(Ice Blue)
4 * GemFan 2015 2-Blade Propeller
1 * Type-C Adapter Board
1 * 4Pin Adapter Cable
Review:
4.0 out of 5
80.00% of customers are satisfied
5.0 out of 5 stars Fun drone!
First drone ever owned. Flying under the recreational flyer act. This drone is awesome, managed to fly for more than 2 minutes without crashing today, on my first ever maiden flight outside. Calculated 30 crashes based in the amounts of videos automatically created. The drone did not break. Note that DJI remotes only supports Mode 1 and Mode 2 controller scheme for flying. When practicing on simulators, ensure you pick one of this, and not Mode 3 or 4.Tips to others configuring the Pavo with both a setup with both a DJI controller 2 and Googles.1- UART is on port 52- update both controller and O3 air unit for initial setup and binding.3- On the Googles, set the video to HD to match canvas from Betaflight. This would align the desired OSD on the screen.4-I ran into a known behavior, where after configuration and paring the drone, the throttle would not work, but the other channels did. This prevented the drone from ascending after arming. To resolve this, make sure to backup your current save so you can restore from it afterward in betaflight. I updated the F4 controller using the text format firmware file through CLI(command line interface) in Betaflight, and then reloading my old configuration file afterward. The firmware can be found from Betafpv site.5- Camera resolution set to 1080p/100fps will produce lower transmission latency while in FPV.6- Watch the weight with battery on drone, it will influence the flying characteristics. On a windy day, I tried a 730MAH 2s battery and it was difficult to have control. It sag down too often. A 3S 550mAh battery performed well though. I was afraid it would be too fast, but it was just about right. Managed to keep the drone under control with it.7-You need to practice on the drone simulators. With about 4 hours of practice myself, I need way more. Still a amateur.8- For first flight, I would suggest to try it outdoor and away from people. Avoid flying on windy day.9- In Betaflight, mode “user 1” is the assigned function that handles the LED strip. You can assign a AUX key to toggle the light one and off.
5.0 out of 5 stars This Just Became my New Favorite Drone.
Early review:Just received, and put the 03 air unit into the pavo frame in about 10 minutes binding included.I'm running it with the DJI fpv controller2 - first time I've run a non DJI drone with a DJI radio. Was a little sketch. I dunno why.It flies amazingly well! The tune is obviously tailored to the build as it is meant to be. I have another pavo 20 frame that I run analog - for fun, while I fly the spare parts around... and as smooth as that one is, this is silk with loc-tite. Smooth and locked in. I love it. It doesn't give super long flights, but I am also using small capacity batteries - 300-550mah HV 3s. The power is great on 3s, but still flies well on 2. Better for indoors, if you have a small house for sure!I've been flying several BetaFPV builds and RTF drones lately, and I find them to be a great balance of affordability and performance. I'm a casual drone pilot, so they fit. And I am rarely disappointed - in fact, they have been proactive with customer satisfaction, reaching out to me about an issue I wrote about. It feels like they're in it with me, and I like that.Overall, the pavo 20 as I run it has been a great surprise out of the box! Very happy! The entire power train is only 105-120 depending where you get it, and although several hd rigs will fit the mount, the 03 air fits like a glove, and makes for a quick, easy process. I was flying in 10 minutes!The cob LED looksgreat, but I am currently having issues switching it on and off. Probably me. I will update this review after I've put it to some work, crashed it a bit, and see if the sweet sweet taste begins to sour in time. I hope the aftertaste is as good as the first sip! Way to go, BETAfpv!
1.0 out of 5 stars Better value & reliability making paper airplanes from $10.00 bills
Follow the power up sequence and the drone doesn't arm. There was an error indicated by flashing lights. The throttle was in the correct position. Need to tap it several times to set the drone to a ready to arm state. There's little difference between this product and a $35 Cherwig beyond the purchase price. The Cherwig is a better build quality.Save and buy an Avata 2. Still looking for a solid micro. Too bad this wasn't it.It really is disappointing. Documentation and instructions are VERY poor. The power on led for the head set cut out and stopped working! Mid flight the head set just cuts out. That's flying an indoor practice pattern. All is well then snow on the screen - drone on the floor.Watch out battery charge and flight time data just disappears from the display. Also be careful the charger can run hot which is concerning.When the drone worked it was pretty cool. (Limited range but solid for the price point). The flight time was as advertised. (Huge improvement over the previous offering). The video was good enough to fly by and I wasn't expecting 4k quality at this price point.Beware if you are harmed by a Chinese product you are on your own unless you are a lawyer or have a hefty fortune. The Bolo A to Z means you go through Sedgwick with an awful BBB rating to get any claim denied. The drone battery sets your house on fire good luck recovering damages.
4.0 out of 5 stars Great sub 250g quad, flies like a dream
Only issue that I really had was the the nuts in the frame would occasionally walk themselves off and become loose but is easily fixable with a few slight adjustments, otherwise a great fun powerful little drone that can hit all the gaps and opens up a whole new world
5.0 out of 5 stars Easy and intuitive
Great little whoop. Very locked in feeling when flying FPV.
5.0 out of 5 stars Venía sin el cannopi completo
No estaba el artículo completo
3.0 out of 5 stars Couldn’t get it to work with dji controller.
Nice little copter but I spent hours trying to connect it my dji controller with no luck. Looked up all the videos on YouTube and change the settings to uart5 like it said and nothing. They need a more clear tutorial on how to do this. The instructions for binding to dji are scattered across the internet. Some say this on YouTube, some have other suggestions on Reddit ect. but none worked.
Increible
Este drone es una maravilla para interior, en exterior vuela bien pero cualquier brisa lo desplaza. Compre las dji goggles 2 para pasar a digital ya, pero seguía con mis gafas analógicas para volar pequeños tinywhoop en casa, este drone ha cambiado eso y puedo disfrutar digital en casa. Si, no es tan pequeño como un 65mm pero entra en los mismos huecos, es igual a un 75mm, así que porfin puedo decir que me voy a deshacer de mis sistemas analogicos. Muy recomendable
Pavo Pico – Perfetto per chi inizia, ma con qualche attenzione
Il BETAFPV Pavo Pico è un'ottima scelta per chi si avvicina al mondo dei Cinewhoop o vuole un drone versatile per voli indoor e outdoor. Con un design ultraleggero, è perfetto per chi cerca un quadricottero facile da maneggiare, ma che offra comunque un certo grado di performance. Tuttavia, ci sono alcune cose da considerare per sfruttare al meglio questo piccolo ma potente drone.Cosa mi è piaciuto:1. Compatibilità con DJI O3Ho usato la DJI O3 unit con questo drone, ed è sicuramente una scelta eccellente in termini di qualità video, ma devo avvertire che è un’unità piuttosto costosa e delicata. Inoltre, tende a scaldarsi parecchio durante l’utilizzo, quindi preparati a partire subito dopo aver collegato la batteria.2. Volo breve, ma migliorabileUno dei principali svantaggi è la durata del volo: con le batterie standard, non si riescono a superare i 4 minuti. Tuttavia, ho scoperto che utilizzando batterie da 550mAh, puoi guadagnare qualche minuto in più, portando il tempo di volo a un livello più accettabile. Questo piccolo cambiamento fa una grande differenza se vuoi fare sessioni di volo leggermente più lunghe senza compromettere troppo il peso.3. Delicato e reattivoIl Pavo Pico è molto reattivo e agile, il che è fantastico per chi cerca un'esperienza di volo dinamica. Tuttavia, questa reattività lo rende anche piuttosto delicato, soprattutto per i principianti. Se il drone prende qualche colpo, i paraeliche sono i primi a rompersi, quindi è meglio evitare voli troppo aggressivi se non sei ancora esperto nel pilotare whoop così reattivi.Consigli:Viti e gommini per la fotocamera: un piccolo trucco che ho scoperto durante l'assemblaggio è aggiungere dei gommini accanto alla fotocamera, insieme alle viti. Questo aiuta a stabilizzare meglio la fotocamera e ridurre le vibrazioni, migliorando la qualità del volo e delle riprese. Anche se non è consigliato di default, lo raccomando vivamente per chi cerca un setup più stabile.Attenzione ai PID: un altro aspetto da considerare è la configurazione dei PID. Questo drone offre una buona flessibilità: puoi renderlo più dinamico e reattivo, o più docile e stabile, a seconda delle tue preferenze. Se sei alle prime armi, consiglio di iniziare con una configurazione più morbida per evitare di perdere il controllo, soprattutto in spazi ristretti.Batterie da 550mAh: come ho già accennato, consiglio vivamente l’uso di batterie da 550mAh per migliorare il tempo di volo. Con queste, ho notato un miglioramento significativo, riuscendo a prolungare il volo di qualche minuto. Se stai cercando di sfruttare al massimo ogni volo, questo è un accessorio indispensabile.Conclusione:Il BETAFPV è riuscita a rendere un piccolo drone FPV alla portata di tutti, è un drone fantastico per chi si avvicina al mondo dei Cinewhoop o per chi cerca una soluzione agile per voli indoor e outdoor. Tuttavia, richiede un po’ di cura e attenzione, soprattutto in termini di configurazione e protezione, dato che è piuttosto delicato. Se usato correttamente e con i giusti accorgimenti, può offrire un’esperienza di volo molto gratificante.
Tolle Mini Drohne. Macht Spaß.
Tolle Mini Drohne. Macht Spaß.
DJI FPV3 wird nicht unterstützt Fehlkauf
Leider ist es nicht möglich die DJI FPV3 Fernbedienung mit der Drohne zu koppeln.Es gibt auch keine verwendbaren Preset.Unterstützung vom Hersteller gibt es nicht.Im Internet ist auch nichts zu finden.Meine Hoffnung ist die O3 in einer anderen Drohne verwenden zu können.Nicht zu empfehlen weil nicht zu verwenden.
Pavo20
Als erstens: Total überteuert, normale Preis +-110€ direkt beim Betaflight.Mann muss aufpassen, diese wariante kommt ohne O3 Filter und Ohne Accu.Drone ist keine einsteiger Spielzeug. Braucht schon ein bischen Verstand und wissen was du tust.ELRS updaten verlief ohne Problem. Da ich eine Eachine tx16s(rebranding von Radiomaster) mit Betaflight 2.4Ghz Tx ELRS besitze und bereit Erfahrungen habe war es kein problem mehr.Betaflight configuration war auch simple. Einzige, ich müsste telemetrie einschalten und min max Werte für trottle anpassen.LED schaut grandios aus. Da es auch aus/ein schalten lässt finde ich einfach super.Zu vergleich ich besitze auch ein Pavo30. Für Indor Erlebnisse pavo20 ist viel besser geeignet.Außen fleiegt pavo20 auch Überraschend gut.Zum fliegen benutze ich Ovonic 650mAh 3s. Die passen nicht im batterybay, aber lassen sich trotzdem gut befestigen.Fazit: voll zufrieden.
Visit the BETAFPV Store
BETAFPV Pavo20 Brushless Whoop Quadcopter with HD Digital Bracket, PA12 Material, F4 2-3S 20A FC, 1103 8500KV Motor, COB LED Strip, Compatible for DJI O3 for FPV Racing Indoor and Outdoor
BHD72458
Quantity:
|
Order today to get by
Free delivery on orders over BHD 20
Product origin: United States
Electrical items shipped from the US are by default considered to be 120v, unless stated otherwise in the product description. Contact Bolo support for voltage information of specific products. A step-up transformer is required to convert from 120v to 240v. All heating electrical items of 120v will be automatically cancelled.
All product information listed on the site are from 3rd party sources, including images and reviews. bolo.bh is not liable for any claims or promotions mentioned on the product description or images with textual content. For detailed product information, please contact the manufacturer or Bolo support by logging into your account. Unless stated otherwise during checkout, all import taxes and duty are included in the price mentioned on the product page. bolo.bh follows the rules and regulations of sale in Bahrain and will cancel items in an order that are illegal for sale in Bahrain. We take all the necessary steps to ensure only products for sale in Bahrain are displayed. Product stock and delivery estimate may change with the seller even after placing the order. All items are shipped by air and items marked “Dangerous Goods (DG)” by the IATA will be cancelled from orders. We strive to process your order as soon as it is finalized.
More from this brand
Similar items from “Quadcopters & Multirotors”
Share with
X
Or share with link
https://bolo.com/